Now this is the correct way things should be done. Great video!

in Washington state we sandwich the eve metal so no moisture hets to plywood

medal is the way to go if installed correctly.

nice video and professional work!!👌

I like this job!

Very cool, thank you these helped me on my house!

良い仕事ですね👍👍👍

Thanx for info about metal roofing but I need more including where to buy it and how much it cost?

A good pair of western snips goes a long way

Excellent

Drip edge should have been stripped in before it was installed on the eave edge. Metal sweats, those nails will back out after it gets wet, expands and contracts. Metal against bare wood is a no-no

najnowsze samochody

Usually you wouldn't use plywood my crew uses 1by4s

yes we're putting a metal roof on return the old one off we got one by sixes taking the old one off and we brought three quarter inch green board plywood is that the right one to use if we if we're going to put ice and water shield on it will it stick or no thank you

Is metal roof more sure than shingle? My roof is 17 years old and is shingle Timberline 25 for 25 years warranty for Mfg but maximum wind speed is 60 and I living in Florida where Storm win speed is more every year. I have little damage with the last one Irma and we have to repair, but I am thinking to install new one. Please what do you recommend: Shingle or Metal? Thanks.

thanx for info about metal roofing but I need more including where to buy it and how much it cost?

buenas construccionees

Z-Bar whats that?

What kind of metal roof are you using here. It looks like a regular shingle but is it metal? Please let me know where to get this red metal shingle type roof. Mike Wendt

A lot of gold screws. I hate those

Safety firs harnes on & tie off 100%%%% then stare. Work

I am interested in replacing my old single roof with a Galvalume metal roof. I too am confused with what the builders are saying. My roof is old and they want to put the new metal roof over the old singles. For some reason, that does not sit well with me. Also, wouldn't the roofers need to check the wood on the roof and the condition of the old singles first? They are 23 years old at this point. One roofer said, that if he had to remove the singles, it would cost around $1,000.00 more. Please give me some solid input about this. Thanks. Rich

Do I need roofing paper be for I install tin roof....I'm making a storage ......8x12

I had a new metal roof put on and they did not put any vents in and I am having trouble with mildew and mold throughout my trailer. I have called all summer trying to get this fixed. They did not put any felt over the porch part before putting on the metal and the flashing is not fixed right. I cannot get anyone to help me with these problems without charging for a new roof. I would never recommend for anyone to get a metal roof. There are too many crooked people out here that do not care to do a bad job and then you can not get them to come back and fix their job. I live in Richlands, VA. I have had numerous people to check this. Guess we will eventually just have to move out of our home and let it finish rotting down. So sad that there are dead beat carpenters that would cheat so many people.

buemos videos construccion

You are installing a metal roof into osb!!! The metal roof manufacturer does not recommend this at all!!! OSB is press wood (glued particle chips pretty much)... The screws will not hold properly. When the metal expands and contracts on hot summer days the screws will break free and you will have screws all over your roof that are backing out. Use plywood or strip the roof out with 1x4 or 2x4 perlins every 2 feet attached to the rafters. Don't make the mistake of installing metal roofing into osb you will regret it in a couple of years when the screws start backing out.

the neighbors are filming me. wave

2.5 inch nail with no penetration except flimsy sawdust board. same with long screws. a joke.

👍

A couple of screws???? More like every six inches on the drip then ice and water over drip edge

Be in compliance with state law when installing and you have to know what you're doing. So let's make a KZfaq video how to do it lol

ice/water. then eve metal then senthic. much better

Kein Arbeitsschutzgerüst, wieder mal

No fall protection -

This guy sounds like ozzyman trying to be serious looool

Nagyon érdekes és ésszerű tetőszerkezet. Én is így szeretném megcsinálni a házam 🙋🙋🙋

can I instal metal roof over shingle roof

Pues por ensima esta protejida fe liqueos pero estas casas estan hechas para joder. Alos compradores no para. Deveramente brindarle un verdadero hogar resistente ah tornados insendios i tornados i huracanes. Son un asco de casas.

What's up with the first layer

the installer is a roofer and probably a good climber, but isn't it foolish to climb around with no safty rope??????

Don't eat aluminum you will sheet metal

I see harness, but no tie off??? also hitting sharp steel with bare hands? men under with no hard hats? terrible safty protocol.

These Americans seem too be redoing roofs a lot do it right first time last a life time daft little wooden houses

cheap metal

Thanx for info about metal roofing but I need more including where to buy it and how much it cost?

thanx for info about metal roofing but I need more including where to buy it and how much it cost?