Cruise Control Top Grip Installation Instructions

Рет қаралды 21,512

Күн бұрын

This is a the updated installation video for the Redshift Cruise Control Upper Grip.
The Cruise Control Upper Grip is the first grip of its kind for drop bar handlebars. It provides a more natural and comfortable position on long distance rides - eliminating road buzz and creating the perfect climbing position that reduces strain on your wrists and hands.
Pair it with the Cruise Control Lower Grip for a complete ergonomic upgrade!
Available at www.redshiftsports.com/products/cruise-control-drop-bar-grips
-
Music: Cubic Z - Diamond Ortiz
Support by RFM - NCM: bit.ly/2xGHypM
-

Пікірлер: 19

@RideWithRoy Жыл бұрын

Very clear tutorial, thank you👍

@Redshiftsports Жыл бұрын

You're very welcome Roy! Thanks for your interest and feedback!

@TexasNightRider 2 жыл бұрын

Thank You For The Tutorial Video. I'm Still Debating The Purchase Of This Product And This Helped.

@Redshiftsports 2 жыл бұрын

You're very welcome! If you have any additional questions don't hesitate to reach out to our support@redshiftsports.com email.

@TexasNightRider 2 жыл бұрын

@@Redshiftsports I Ordered Both Top And Bottom Grips Today Through Amazon. Thank You.

@Redshiftsports 2 жыл бұрын

Thank you so much for the purchase and enjoy the Grips!

@DocMucki 3 жыл бұрын

Audio level is way to low

@StressKind Жыл бұрын

I needed to see the video to know how it looks from the under side. Maybe add that to the marketing pics you provide for web shops?

@Redshiftsports Жыл бұрын

Thanks for the great feedback!

@2guildy Жыл бұрын

Hi , good video. Could you tell me if you can use standard length roll of bar tape , or do you have to use the extra long tape from Redshift

@Redshiftsports Жыл бұрын

Thanks for checking it out! You can absolutely use standard length bar tape with the top grips unless you have really really short tape - and of course it depends on how tight you wrap but should not be a problem for standard width bars - if you have a really wide bar then you will likely need extra long tape. Thanks

@miguelgonzalezvaz5552 Ай бұрын

Why tape the cables to the handlebar first and not the other way around? Now, the grips and the tape attaching them to the bars gets on your way when replacing the cables in the future. Any problems with doing this process without cables and then taping the cables to bars afterwards? Thanks in advance

@Redshiftsports Ай бұрын

Thanks for the question and you are certainly correct that securing the grip prior to the cables could be a useful way to allow you to adjust cables in the future without having to touch the grips. There is no reason you can't do it this way. Thanks

@EasySteve-vi6yz 3 ай бұрын

Is it possible to use the top grips with aero shaped bars as well or do you need round shaped bars?

@Redshiftsports 3 ай бұрын

The grips are specifically designed to fit on 23.8mm round bar which is the standard diameter for round drop bars. They will fit on an aero handlebar section if the front side of it is 23.8mm and circular but if it is not shaped like a circle on the front where contact would be made them the fit might not be that great. Thanks

@VoiceReason Жыл бұрын

My top grips didn't come with the fiber reinforced tape. Can you send me the tape?

@Redshiftsports Жыл бұрын

Hi Matt, we're really sorry to hear you are missing the fiber-reinforced tape. We'd be more than happy to get you a roll. Can you send over an email to our support@redshiftsports.com email? They'll be able to get you all sorted out!