Cruise lever replaced in 10 minutes on my 1994 Silverado OBS!

Рет қаралды 41,586

Жыл бұрын

I show you how I replaced the cruise lever/turn signal lever in just 10 minutes! I worked as a Chevrolet Dealership technician back when these trucks were new! I purchased the aftermarket replace cruise lever from eBay for $27 plus tax.

Пікірлер: 61

@bizerho22 10 ай бұрын

Dude! You solved my mystery! I bought an 88 K1500 project truck and on it the receiving (female) connector for the cruise wire was not clipped to the metal subframe, it was just dangling. I didn’t know what is was for and I thought it was supposed to clip into something…and the cruise wire from the turn signal stalk was coming out of the top end of the steering column (I bought the truck like that, knowing absolutely nothing about how to fix it) and I had no frigging idea what, where, who, when, anything, until I saw your video and it all clicked. Thank you sir!

@jerridsmith7015 3 күн бұрын

Awesome video! Great work!

@FadiKasbo 2 ай бұрын

amazing VDO short==sweet==and exactly what I needed to know !!!! this is the best VDO this year

@kygator1 5 ай бұрын

Just watched this cause I thought I remembered this being easier then replacing whole assembly.. Also noticed your a camaro guy, cool deal.. Same here, RubySS is my wife's and I.. Hopefully meet on the TOTD soon.. 👍

@michaeldraper9804 2 ай бұрын

Thank you i looked everywhere for the connection found it at 1;15 big ty

@dano4572 11 ай бұрын

To the point!!!! Thank you , sir!

@bigal4304 10 ай бұрын

beautiful truck

@onlyasheep 8 ай бұрын

Thank you!

@hillbilly7432 6 ай бұрын

Thank you you saved me a lot of work bud

@sntruck Жыл бұрын

Beautiful truck I have a 92 two tone blue extended cab 8 foot bed, C1500 1/2 ton it was hard to find in good condition. I got the new switch hope it works.

@HK-qj4im 11 ай бұрын

A tiny bit of hand lotion.. Slide thru easier. Electricians have a special lube they use to pull heavy wire...that would be perfect

@TheDharuma Жыл бұрын

Mahalo sir. Very informative and helpful Aloha

@dronechaserzl1 Жыл бұрын

Glad I could help!😎👍

@SwiftyMcVeigh851 4 ай бұрын

Right on Man... Thank You.

@Bigcash3 Жыл бұрын

Beautiful truck! I got a long bed 92 obs Chevy. Red just like yours and same interior. It’s a stick though.

@dronechaserzl1 Жыл бұрын

I wanted the stick but couldn’t find one near me.😎👌

@miguelcontreras99 Жыл бұрын

Awesome

@datdudetheyhate4121 Жыл бұрын

Hell yeah it helped

@BRMN8R 10 ай бұрын

Man i seen that big black wire behind the stalk on mine and i though a previous owner done a hack job of fixing something. I didnt realise that was factory. Mine works, but i want to replace the stalk as the paint has worn off mine too.

@bruzrcruzr2004 3 ай бұрын

Thanks dude.

@GingerCapnBA Жыл бұрын

Thanks man

@dronechaserzl1 Жыл бұрын

You’re welcome 👍

@SchnelleKat Жыл бұрын

thx for the video! I got a 91 k2500 LD (light duty) 6 lug. i bought for my winter/spring truck. Unmolested. All the writing is worn off the Stalk. So i gotta find a new one. I'm new to these, i am coming from the Square bodies.> Diesels (6.2). What blew me away is that it came with a factory dealership/build sheet invoice. nice exhaust you got, is it stock? only other issues mine the climate control floor vents and the blend doesn't work. was that module problematic even when new?

@dronechaserzl1 Жыл бұрын

Yep, that module was problematic new even. Congratulations on your truck purchase. Yes, mine is a stock 5.7

@ignaci0musik 6 ай бұрын

wow thank you

@justamanandhisvan 5 ай бұрын

I have a 92 chevy motorhome p30 chassis. The cruise control would work and randomly shut off while driving. Now it doesn't work at all. Will a new switch fix it?

@scottconnors578 Жыл бұрын

Do you remember the part number you got from eBay?All the cheaper ones I keep finding so they don’t fit.

@dronechaserzl1 Жыл бұрын

331196222881 $27.99 they went up a little

@joshraper7376 Жыл бұрын

Having an issue on my 89 longbed. Wipers won’t quit after you turn them off. Usually will stop 30 seconds ti 90 seconds after and it is in random places. Thinking this would be the entire assembly inside the column and not just the lever. Thoughts? Good video by the way.

@dronechaserzl1 Жыл бұрын

This is usually caused by a faulty circuit board on the wiper motor itself.

@joshraper7376 Жыл бұрын

@@dronechaserzl1 thank you! I’ll try there first.

@sntruck Жыл бұрын

Yep you don't have to change the wiper motor just the circuit board

@HK-qj4im 11 ай бұрын

This is one of those things that will probably happen to all these trucks....eventually

@sntruck 7 ай бұрын

I see you got the old style mirrors. I'm trying to figure out away to stop them from the wind from folding them in while driving. Any thoughts?

@dronechaserzl1 7 ай бұрын

Absolutely, take the cover off and tighten the collar screw, problem solved.👌

@reborn.reformed 4 ай бұрын

Oh yeah until somebody takes your plastic cover life is really good. LOL now my stuff is rusting, I can't believe somebody took my cover

@KevinCavezuela 3 ай бұрын

So I have a 93 Silverado and my dash just tells me how fast Im going am I able to change it without modding anything to a one that shows me my rpms?

@obsdwayne Жыл бұрын

Good stuff! You think that will fix my problem? I put my signals and it doesn't click off, I have to click off my signals manually.

@dronechaserzl1 Жыл бұрын

No, that won’t fix your problem. You have a turn signal switch problem. Most likely a small metal piece has come off your switch that used to do the cancelling.

@obsdwayne Жыл бұрын

@@dronechaserzl1 oh okay! I'll look it up

@timmaxim2120 Жыл бұрын

I have a 94 Silverado 1500 4x4 with the same setup BUT I pulled on that lever hard enough that I thought it would brake the switch and it will not just pull out, any other trick to it?

@dronechaserzl1 Жыл бұрын

If it’s tilt column and a 94 then it will come out. I’ve done hundreds of em. Turn it a little then pull, jerk on it turn it back straight then pull, it will come out. 👍

@timmaxim2120 Жыл бұрын

@@dronechaserzl1 thanks , I'm thinking it got spun around inside the switch somehow and isn't lining up right to pull out

@Born2Sled 4 ай бұрын

You showed every part of the swap except for the part I cannot get. New lever will NOT go back into the switch in the column. What’s the trick?

@ruthrizer8763 Жыл бұрын

Would that method work on my 1989 Chevy Silverado, long bed, rear wheel drive?. Blinker runs too fast on Left side. Not the board or bulbs.

@dronechaserzl1 Жыл бұрын

You have a bulb out or flasher is bed

@dronechaserzl1 Жыл бұрын

Improper bulb will also do it

@guadaluperamirez5611 3 ай бұрын

Donde consigo la palanca 🙏🏻?

@LuisPerez-rx9ok Жыл бұрын

Lever won’t go all the way in any suggestions

@dronechaserzl1 Жыл бұрын

Turn a little and push, try different positions and wiggle til you get it to go.. it will go.

@MrRIPZ1 Жыл бұрын

Part number for the mechanism

@zerchdafirst5994 Жыл бұрын

You Just forget the white sleeve that covers the cable

@dronechaserzl1 Жыл бұрын

I know right? I’m a better mechanic than videographer. 😎👍

@reborn.reformed 4 ай бұрын

Is there a cover? What is he talking about?

@saltyraptor5681 4 ай бұрын

@@reborn.reformed there's no cover

@FullAutoApolotics 4 ай бұрын

@saltyraptor5681 so tell me what the white tube sleeve is that is what I'm replying to in the initial comment under which I clicked reply? It's laying in the floor when he shows his parts and then it's up in the column as if it is used to install it somehow so that is why I'm asking, I also found the original part from GM on Amazon but man that thing is like 75.00 so I'm really glad to know that this one works well

@zerchdafirst5994 4 ай бұрын

@@FullAutoApolotics the white sleeve it's to cover the cable and I just get of that cause I was having trouble to slip the cable trough the steering column