CRUMB Basics | Getting Started With Power Supply And Breadboard

Рет қаралды 26,889

Жыл бұрын

store.steampowered.com/app/21...
Interactive and immersive learning
Our modern world is dominated by electronics. With a diverse range of careers in electronics available for young and adult minds alike, CRUMB offers an easy to use and interactive introduction to electronic circuitry.
Fully realised in 3D, you can construct prototype circuits as you would at the workbench without the risk of terminal component failure or the hassle of ordering individual components.
Large Catalogue that continues to grow
Infinite combinations and possibilities
Version 1.0 of CRUMB comes with a great selection of starter components to allow you to jump straight in to creating prototype circuits.
With the catalogue available it is possible to study the workings of transistors & audio filtering, all the way to programming an EEPROM to run a basic program.
For the beginner, it is possible to learn and understand the basics of interactivity, and for the enthusiast it is possible to analyse and perfect prototypes before constructing real world models.
Using the built-in oscilloscope and analysis views, it is possible to see clearly the interaction between components from within the wires themselves
Community driven development
CRUMB will continually be updated and expanded beyond version 1.0.
Through community feedback and suggestion, there will be many more components and features added in the future.
If you have a suggestion for CRUMB please visit the forum and leave a message

Пікірлер: 41

@ZergSmasher Жыл бұрын

I had a real circuit kit as a kid, and had a lot of fun making it do different stuff. It was a fun way to learn about electronics and basic circuit theory.

@KerboOnYT Жыл бұрын

I had one of those too, with the little spring connections, and had loads of fun with it

@Sleeper____1472 Жыл бұрын

Never seen a simulator like this, cool.

@Bendigo1 Жыл бұрын

I didn't know you did videos on this one. I found it during a boredom streak and decided to try it out.

@bumpin2098 Жыл бұрын

this what I been needing for a minute thanks

@canobiggs Жыл бұрын

Excellent video, thank you!

@TravisShelton2445 Жыл бұрын

Good stuff! Really appreciate this.

@fredmeyer9481 Жыл бұрын

Hemen satın aldım ve çok başarılı bir program

@WhatTrigger Жыл бұрын

One must ask the question. if you do something completely wrong, does it show and burn out components?

@KerboOnYT Жыл бұрын

I haven't tried that yet

@fredmeyer9481 Жыл бұрын

I hope the microchip library is added.

@chosenmimes2450 Жыл бұрын

wasn't the transistor in the second example completely unnecessary? couldn't you have achieved the same result (putton press to light up the LED) without the transistor?

@KerboOnYT Жыл бұрын

Yes, but I wanted to show something a little more fancy than just a button

@hootmt9120 Жыл бұрын

Now I know to hook up the power supply and click the green check mark.

@MopWhoSmells Жыл бұрын

Can you make a blue smoke emitter?

@KerboOnYT Жыл бұрын

I'll find a way...

@ukpauchechi Жыл бұрын

hmmm does it follow the rules of electricity? will an led go of if alot of current is added to it?

@KerboOnYT Жыл бұрын

There are error messages about reversed voltage, over current, etc, but no animated smoke or destruction

@RICKYPOYPOY 8 ай бұрын

I thought the resistor has to be on the positive side of the light. Or did I miss something?

@KerboOnYT 8 ай бұрын

The resistor just limits current flow. It doesn't care about polarity

@sunaryopremtv4176 Жыл бұрын

can you do measurement like multitester to the circuit? i want to learn how to measure voltage, current, etc correctly

@KerboOnYT Жыл бұрын

There is a scope function that let's you see voltage and current on most components

@sunaryopremtv4176 Жыл бұрын

@@KerboOnYT alright thank you

@Akvideoediting69 11 ай бұрын

hey kerbo can you make my 3d project in crumb pls reply i want to make project

@KerboOnYT 11 ай бұрын

I'm sorry, but I don't have much spare time

@Akvideoediting69 11 ай бұрын

@@KerboOnYT so how to download this simulator free sir pls reply

@KerboOnYT 11 ай бұрын

That would be stealing. You need to purchase the game on Steam. There is a link in the video description

@Akvideoediting69 11 ай бұрын

i am 15 yr old boy i have no money is there soln for me to solve this. i have revolutionary idea also.

@rafael02ification 4 ай бұрын

crumb has multimeter?

@KerboOnYT 4 ай бұрын

No, but it does have a current and voltage probe. IIRC it's the crosshair symbol under the Interaction menu

@guyfoundry4228 Жыл бұрын

I followed the tutorial and my LED did not light up when I pushed the button

@KerboOnYT Жыл бұрын

Things to check: 1) Polarity of the LED (turn on pins to see + - leads) 2) Power supply is on and at least 5V 3) Ensure you are in manipulation mode to push buttons (little hand icon)

@guyfoundry4228 Жыл бұрын

@@KerboOnYT 1) Positive pin is in 20E for the LED, Negative is on 20F. 2) Power supply is at 5V 3) Button is pressed, nothing happens Oddly enough the LED works per the first half of the video. Either I'm doing something wrong or there's a bug. I followed the video step by step, everything in the right location. In the most recent update they do allow the button to go in the little gap.

@KerboOnYT Жыл бұрын

@@guyfoundry4228 Strange. If you can send a screenshot of your board or upload the .crumb file somewhere maybe I can see what's going on

@guyfoundry4228 Жыл бұрын

@@KerboOnYT I have it on my github page. I tried posting the link but for some reason it did not allow me. My username is the same as here except without a space, and it is my only project I have uploaded.

@KerboOnYT Жыл бұрын

You're using an NPN transistor instead of PNP. Switch type and it will work fine