CRUNCH TIME… 4 Days To Finish The Ford Bronc-Star!

Рет қаралды 228,638

Жыл бұрын

Easter Jeep Safari is next week! Will we have the BroncStar ready in time? Robby and Hillbilly tackle the steering, cage, and brakes. Robby also stops by ‪@MattsOffRoadRecovery‬ to see the damage to Blue Steel.
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton.com
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #Bronco #EasterJeepSafari

Пікірлер: 574

@willmorton6800 Жыл бұрын

Anyone else notice that Hillbilly didn't have the flare nuts on the line when he was showing how to flare the front brake line? Then boom, he did? :) The magic of editing!

@61rampy65 Жыл бұрын

The whole time Hillbilly was hooking up the flaring tool, I was yelling that he forgot the fitting!

@robnobrc Жыл бұрын

Yep,,And we've all done it at least once ourselves!!

@61rampy65 Жыл бұрын

@@robnobrc In my case, it was way more than once.🙃

@brettperkins4643 Жыл бұрын

We all have forgot a fitting or two before we flare the tube

@chrisbaer4567 Жыл бұрын

Hillbilly is getting really comfortable on camera. His segment was awesome! Glad to see his comfort expanding.

@bicross87 Жыл бұрын

Came to the comment to say just that ! He is improving so much in front of the camera, this guy rocks

@braxtonnelson7422 Жыл бұрын

I agree!

@razghost2 Жыл бұрын

Just wanted to say good job from Hillbilly, I'm sure it must of been daunting having to work and record on his own but he nailed it.

@markreetz1001 Жыл бұрын

Enjoyed the Blue Steel segment where Robbie picked up his MCJ award. Way to go Robbie!!

@kentmckean6795 Жыл бұрын

25:58 I'm impressed with Hillbilly magically getting the fitting on after flaring the line. The magic of editing I presume. 😄

@p38steve0 Жыл бұрын

No mechanic has never not made that mis-take. Came he to see if I was the only one to notice.

@detroitdiy Жыл бұрын

Those wheels are looking sweet, I hope Hillbilly reconsiders his love of steel wheels. Great video guy's.

@av8r3400 Жыл бұрын

FYI: From a retired machinist, use low gear on the drill and keep the reamer wet with cutting oil/WD40/etc. for it to cut best and last.

@NonTypicalRacing Жыл бұрын

Exactly!...just not on a pitman arm, lol.

@harlech2 Жыл бұрын

this ^^^ 10000% I don't think Robby or Hillbilly believe in cutting oil. (and I bet they throw away drill bits too)

@NonTypicalRacing Жыл бұрын

@@harlech2you're right but in their defense, he probably gets really nervous w/oils being slung around n splattered, as its a bodyshop. I know he's got a mech. room, but its all under the same roof along w/the threat of fisheyes. Still doesn't change the fact though I guess.

@ronthompson2366 Жыл бұрын

Saw the same and thought the same... as a machinist it was a cringe moment to watch the reamer and drill just getting smoked. Readers can be resharpened... so can good drill bits... but ugggh cutting oil is key.. also helps you not work harding the items... 😮😢

@georgedeedsnotwords2162 Жыл бұрын

Would you use cutting fluid to keep it cool or an anti abrasive like WD-40 that resists cutting ? Two different chemicals with two different properties . One to promote cutting one to stop it .

@mohawk2138 Жыл бұрын

Respect to ROBBIE LAYTON HILLBILLY DINNER, DEMRY,AND LINCOLN..... THE BOYS GETTING IT DONE....YES, DEMRY IS ONE OF THE BOYS

@mohawk2138 Жыл бұрын

Someone liked my comment......was that Lincoln or DEMRY? Cause robbie is sooooo busy working on people's" HAPPY LITTLE ACCIDENTS".

@shaggy1958 Жыл бұрын

Dude, you obviously have not looked too close at Demri. She is definitely NOT one of the boys.

@mattconnor6779 Жыл бұрын

The straight, horizontal bar going between the steering knuckles is the tie rod, and the angled bar going from the steering box to one of the knuckles is the drag link.

@robertscranton8293 Жыл бұрын

Hahaha...

@stevemiller3082 Жыл бұрын

“Tie rod” ties the two steering knuckles together

@jamestowne2952 Жыл бұрын

This is why your front axle is moving, the tie rod is making contact on the diff. Traditionally tie rods have angles at each end as well. I hope this helps!

@dtnicholls1 Жыл бұрын

There are no tie rods in that setup.

@billbillinger2491 Жыл бұрын

@@notsevenfeettall They are tie rod ends. The bar they attach to is the center link... linking the tie rod ends together. Assembled, it is a tie rod assembly.

@BigElCat Жыл бұрын

I kinda like the bull's horn effect of the steering wheeling being 180* out. Might enhance Hillbilly's wheelin'.

@suzannebert3652 Жыл бұрын

You all do better in Crunch Time. Glad the boss keeps all you guys on track

@AFloridaSon Жыл бұрын

Looking forward to seeing the Broncstar on the rocks.

@DeanF Жыл бұрын

ME TOO!!!

@jeffreyabell Жыл бұрын

Great editing for HILLBILLY who did an excellent job explaining the brake lines.

@Black3ternity Жыл бұрын

5:15 - Love the torch and the hole in the tarp a few seconds later 😀 Stay safe guys. Love the content!

@wilsonwilliam1 Жыл бұрын

I was hoping someone else noticed that!

@bryanmcdermott4204 Жыл бұрын

Really like Hillbilly's explanations. The Bronc Star is looking good. It seems highly likely Cody pitched in a ton if this got done.

@reddog543211 Жыл бұрын

Amazing job on crunch time ....everything fast paced....great job on cam work Boss !

@garlandremingtoniii1338 Жыл бұрын

It’s amazing to me, the amount of work that you and all your men get done. Man. Absolutely, Amazing.

@jasonmanley5287 Жыл бұрын

Your tubing work looks great. In spite of your normal attention to detail in your body work, I didn’t expect the lines you created on the Bronco to look so good. Really sweet!

@davepb5798 Жыл бұрын

The bigger the drill, the slower the speed! Love the show!

@Gaming.with.Benjamin Жыл бұрын

😂😂😂 just noticed in the description at the end.. “thanks for watching, Daddy loves you!” 😂😂😂

@edwardsimmons3721 Жыл бұрын

Nice fabrication work. Can’t wait to see it on the trails.

@Kiki-Kauai Жыл бұрын

Totally enjoying Robby learning to bend tubing. And WTG Cowboy videoing and working solo. We are all excited for BroncStar-dom! Great video. Even a cameo by Peanut!🌺

@ronthompson2366 Жыл бұрын

Never fails.. race car or hot rod ... always thrashing at the end to get it done... it's like buying Christmas gifts no matter what.. it's Christmas eve and you are still scrambling to get that one or two or three or.... last gifts. But in the end it all comes together and everything basically done. It is all fun... and you have a whole year to do what you have to do for next year.... until suddenly you realize it's crunch time AGAIN !!!!

@whistlinlipo Жыл бұрын

I thought it was hilarious that on 5:15 to 5:20 or so you completely played off the burnt wall!

@tobeygalbreath6286 Жыл бұрын

Lol when he lit the torch, my first thought was how close to the wall the press is. Indeed it might have been too close.

@knightclover5079 Жыл бұрын

Yeah hillbilly is shining in this video, good job. You all are amazing.

@brentevje5939 Жыл бұрын

Remember to listen to the Boss AKA the voice of reason she has your back. Good luck with your build.

@dave6501 Жыл бұрын

I like the idea of color matching the bumper. But if Matt likes Black. Let's see a nice mat black maybe that special tough coating which will not chip or scratch. 😊

@montegtaylor Жыл бұрын

Great video and thanks for sharing your experience.

@meforsure5221 Жыл бұрын

Broncstar is looking awesome!

@davehiltabidel1006 Жыл бұрын

Can't wait to see the bronc star done.

@whatthefox4274 Жыл бұрын

Wishing you guys luck.. love your channel

@timmaltese806 Жыл бұрын

Hahaha... i like at the 5:00 minute mark the wall looked good... Hillbilly doing some torching then 2 seconds later burnt wall... good times :)

@mattcramer6945 Жыл бұрын

So excited to see the work to be done on Blue Steel. Color matched front bumper would look awesome!

@timvanasen6711 Жыл бұрын

Bronkstar is comming along I think you'll make it to EJS, great video thank's for sharing ❤😉👍

@DeanF Жыл бұрын

Robbie, the tube work looks so cool! Keep up the great work on the FlagShip BroncStar! And can Demri get any cuter???

@JThelen1031 Жыл бұрын

Those rims and tires are absolutely ridiculous, and I freakin love it.

@chriswilliams4200 Жыл бұрын

I will take welding wire and form it to fit the tube want. Minding that you are modeling the top of the bar or the bottom then bend to match. WAD (wire aided design)

@rickmorriss2302 Жыл бұрын

The bronxstar is really coming on well done

@henrycarlson7514 Жыл бұрын

So wise , Thank you . Another fine trophy for the collection

@SchysCraftCo. Жыл бұрын

It’s coming along nicely guys. Can’t wait to see more videos soon. Keep up the great craftsmanship and hard work my friends. Fab On. Weld On. Keep Making. God Bless.

@k6jpo Жыл бұрын

Way to go Demri! Great to see you in the video.

@RIGeek. Жыл бұрын

With that steering ratio, it's going to be really hard on the wheel, column and steering shaft. Also, it's gonna be rough.

@lonhoschar1943 Жыл бұрын

Bronc Star is coming right along!! It's gonna be awesome!!

@coreydemarce4652 Жыл бұрын

Brakes only slow things down. Great vids! Thank you guys.

@Kickinpony66 Жыл бұрын

Yes, you need brakes. Since everything is extremely accessible, do them now. @18:54... The Boss correcting the Wardrobe Malfunction! (YAY!!!) 😊😊 I think you're going to want a proportioning valve. 😉😉

@richard3141592638 Жыл бұрын

Anyone else anxiously waiting to see if Hillbilly remembered the nut before flaring the end?

@NonTypicalRacing Жыл бұрын

Lol, right on...I've forgotten that before too.

@Farang_Lifestyles Жыл бұрын

Hillbillie is an awesome cameraman and shop engineer at the same time,,,,, fast moving....clear n precise.

@johnfitzpatrick2469 Жыл бұрын

Hello Robby from Sydney Australia. Exceptional eye for detail, discovering the steering clearance on the BRONXSTAR. 🌏🇭🇲

@kathleencallaghan4867 Жыл бұрын

Robbie is turning into an artist with his tubing work and design.

@rythemzlatin Жыл бұрын

Cody : the Sobering Voice of Reality ( 😄 )

@collinsmith9941 Жыл бұрын

That thing is looking sweet Great work on the hardline hillbilly. Nice work on the tubing Robby, looking pro

@aarone3790 Жыл бұрын

Awesome video I totally believe that you will get her done

@Thatgreenbronco Жыл бұрын

that pitman arm stands no chance

@kendallkilgore7799 Жыл бұрын

And wait till HB learns how much harder it will be to steer in a bind

@rhondasweeney7271 Жыл бұрын

Awesome video!

@jamesdavid5997 Жыл бұрын

Hillbilly deserves more credit, to get on camera and have ppl say things good or bad it's tough to put yourself out there. I couldn't imagine ppl watching me in the shop, all the content is great and hillbilly, dinner, Cory, the boss their all part of this show to me...

@Tomcroese Жыл бұрын

You are good at making those pipes. Much work!

@michaelatherley8477 Жыл бұрын

Looking good making good progress

@cameronostrup9535 Жыл бұрын

Lol thank you for the loading symbol on hill Billy's 4head. The look of confusion killed me

@cynthiawallen4946 Жыл бұрын

Love watching your channel and hillbilly did a great job 👏

@psg6314 Жыл бұрын

Great video and great job with the truck and God bless from GA and stay safe

@Mikesmith-tm5sh Жыл бұрын

That wall got a little warm 😂

@johnkranz4004 Жыл бұрын

Coming along very Nice Hillbilly and Robby

@jasonlt1982 Жыл бұрын

Great stuff gang!

@TheOldaz1 Жыл бұрын

Good progress guys.

@harrytaylor6854 Жыл бұрын

Good little video all the best well done guy's

@ryancarter142 Жыл бұрын

I have a feeling that if you run with no proportioning valve your going to lock the rear tires before the fronts are engaged hard. The goal of a proportioning valve is to have front and rear lock up at the same time for best braking distance and control. Front tires have more weight above them wich means better traction when braking

@unimog9388 Жыл бұрын

Looks like Hillbily made the same mistake I do.. every.. damn.. time. Flared the brake tube without putting the nut on first lol

@marksloat1608 Жыл бұрын

You are all awesome- stay humble

@1944chevytruck Жыл бұрын

GOOD WORK BOYS!

@richardaffonso Жыл бұрын

Those rims looked sick on the back. I spotted them all mounted up!😂 Awesome video.

@leelawson8375 Жыл бұрын

On ford front ends they all have a track bar so front end does not move side to side when you steer, I would build one for sure. It will stress your coil overs without it!

@lavernagray5449 Жыл бұрын

Demry is awesome. She even helps you not look dorky when your ear is bent forward!😀 Robby, you said you were in hot water. I bet you’re in hot water a lot! But hey, your fun to watch! Oh, do you need a Toyota Land Cruiser? On old one?

@johnweeks5614 Жыл бұрын

Them are some amazing looking wheels going on that bronc star

@richardkelleher1711 Жыл бұрын

It's hot, but I'm not screaming, yet!!! 🤣 It might break, but until it breaks it's going to work really well! 🤣😂🤣😂🤣😂🤣

@windolite Жыл бұрын

Robby Layton fabrication has a good ring to it

@msdadbsb Жыл бұрын

It looks like Hillbilly burned the insulation in the wall! Nice job guys!!

@bobtucker8875 Жыл бұрын

Great content guys 🎉😂.

@joewahrerMotorcycleMan Жыл бұрын

Thanks Hillbilly for showing us how to install brake pads...it might sound silly but when you put them in at an angle and then just snapped them flat I was amazed. Sometimes the simplest things can make all the difference.

@rickardee8539 Жыл бұрын

Nice to see cody

@TheX-3d Жыл бұрын

Love the new welding shirt.

@FenzoMac Жыл бұрын

Love the content

@skyepilotte11 Жыл бұрын

Lots of work. Good progress..

@davidweidner1675 Жыл бұрын

Great build

@jessealvarado6939 Жыл бұрын

Catching up on some video's been busy finding a home to buy just sending some love👊🙏😎

@cadladmd Жыл бұрын

The longer you hold it the hotter it'll get - now that is a t-shirt phrase if I've ever heard of one

@sandkworkshop Жыл бұрын

It is coming together. Robby’s perfectionist ways take time. But it looks good.

@benpeters1940 Жыл бұрын

Nice tube work!

@happydaddy2618 Жыл бұрын

Drag link connects to your pitman arm and drags the the entire steering assembly from side to side. Tie rod ties both wheels together so both wheels turn as the drag link swings from one side to the other.

@stephenpoe2037 Жыл бұрын

Nice mix of projects ! Thanks for sharing ! Will the Bronco be done on time ?

@DRS-TOOLS Жыл бұрын

That was cool

@hellmaster_vs_kitty3645 Жыл бұрын

That award is rad 😂

@kennethfulgium2021 Жыл бұрын

My 68 chevelle and 65 Dart race cars were 1.75 lock to lock. Worked great

@PatHancock Жыл бұрын

It's nice to know that your goregous boss is watching out for ya.

@WilsonsGarage330 Жыл бұрын

4 days brother come on Robby and hillbilly Crank out that bronc⭐️

@zachstark1 Жыл бұрын

Hill Billy is a genius with the pry bar brake bleed

@MrDno420 Жыл бұрын

Hey guys, Bronc-star is looking good. Have you thought about moving the steering box forward so you can keep the full 4 rotations on the wheel with the original pitman arm? FYI: I talked to Hillbilly at the wrecker games by the handwashing station.

@devildog96792 Жыл бұрын

Some of those welds make my neck itch and tingle like hearing nails on a chaulk board 😂😂😂.

@toddlanders4637 Жыл бұрын

For internal roll cages, to get to the top of all the welds, make the verticals shorter. You can then build the cage a bit short and fully weld over the top and then lift to correct height by placing a footing under each vertical.