True

Hi buhillo46, I think you are referring to the pedal plate of the RennSport Cockpit V2. This sim rig is available to purchase on our website (but only in EU region). The plate is not available to purchase separately.

@@domb_fanatec2826 Is there a pedal plate that is sold separately? It's a shame that the pedal plate RennSport Cockpit V2. not sold separately, would be very successful with new csl pedals

@@buhillo46 We don't offer a separate pedal plate - there isn't much demand for it because all our pedals are intended to be bolted directly to a rig, and have a heel plate as part of the design. Most sim rigs come with a pedal plate or some other mounting solution for pedals. The CSL Pedals mounting points are the same as the CSL Elite and ClubSport Pedals. This means that the vast majority of sim rigs and wheel stands will support the CSL Pedals too.

i have the adapter by the way

@@javivega8938 You should download driver 405 from the Downloads section of the ClubSport USB Adapter product page (we added the 405 driver to this page because it specifically improves support for the CSL Pedals with the ClubSport USB Adapter, it has no other difference compared to driver 402). Then update the USB Adapter firmware with this driver.

The CSL Pedals are a two-pedal set without load cell brake. There is a CSL Pedals Clutch Kit if you want to make it a three-pedal set (also without load cell brake). If you want to add a load cell brake, you have to wait for the CSL Pedals Load Cell Kit, which is not yet released. If you purchase the CSL Pedals Load Cell Kit, you do not need to purchase the Clutch Kit, because you can convert the standard brake pedal to the clutch. Please check the product pages for all the info.

for different size of feet. if you have a small feet you want it to be lower so you can rest your heel on the plate. that way when you brake, the whole pedal don't lift up. if you have a bigger feet, its for you to be able to use your toe or the part that close to your toes instead of the middle of the feet to brake.

Podium wheel bases have always had wireless quick release firmware. It refers to the internal wireless data and power transfer for the quick release system (this allows our wheels to connect to our direct drive bases without the need for external cables).

The CSL Pedals in their standard configuration (or with Clutch Kit) do not have updatable firmware. The video demonstrates how to update a Fanatec wheel base in order to ensure compatibility with these new pedals. If used as a standalone USB device, i.e. with the ClubSport USB Adapter, you need to update the firmware of the USB Adapter in the same way. Once the CSL Pedals Load Cell Kit is available, these upgrade the electronics and give the CSL Pedals its own USB connection. Then you would be able to update the pedals firmware directly.

Same, did u fix it?

@@ricardogzz Yes same. This is after a RMA too.

@@naygon Did you fix?

No, they have to plug directly into a Fanatec wheel base in order to work directly with the Xbox unless you get a third party device to do so

@@oneyawdie6139 i think its a good point, also check if everything is well pluged at the right place :/

Soon!

@@domb_fanatec2826 when?

I’d say no. TM has a completely different connector

The pedals in this configuration are not firmware-updatable. However, your wheel base might need a firmware update in order to be fully optimised for these pedals.

@@domb_fanatec2826 what if we don't have a PC? Just a xbox series x

@@domb_fanatec2826 I just the purchase my first sim rig. Bought yall new csl dd..wrc wheel..these pedals..shh shifter ..gt omega art cockpit. I hope these work out off the box for me

This is not how much the shipping costs to the UK. Please check our website again for correct shipping costs to your address, or use the Live Chat system to discuss it with Customer Service.

It's about 30 quid to get it shipped to UK depending on weight of the packages

@@rickyjohnson9024 wrong it costs £30 from fanatec then you still have to pay £100 import tax

i have the same. what do i have to do?

@@niels7628 I generally don't know it just randomly worked

i have a trustmaster t150 so i cant put the rj12 cable in there so i bought a rj12 to usb cable to put it in my pc but it doesnt work. the cable is not from fanatec btw

Same here. Over 2 months in RMA and they send back more trash that doesn't work out of the box. Never again.

EXACTLY>>> THEY DON"T TO THIS DAY!!!!!

This product does not require drilling. The drilling template is only necessary if the rig/wheel stand you wish to hard-mount it to is not pre-drilled for this hole pattern, then you would need to create some holes. But most sim rigs are pre-drilled for this hole pattern, because it is the same as our ClubSport and CSL Elite pedals.

I'm just gonna use the back two mounting points... Don't tell DomB tho. Shhhhh

Yes it does

Yes. You just need to plug it with USB directly to your PC. The accessory is sold separately tho

If combined with the ClubSport USB Adapter (sold separately), you can connect the CSL Pedals to a PC as a separate USB input device, therefore you can use the pedals in combination with any wheel base (from any manufacturer) on a PC. For use on a console, the CSL Pedals it must be connected directly to a Fanatec wheel base.

@@domb_fanatec2826 Can you use this pedals with USB adapter and Drivehub Collective minds for consoles ?

@@josidina6084 We do not recommend and are unable to provide support for third party adapters.

@@josidina6084 yes you can but results vary as it’s third party