CSX Gevo Runs Over HO Scale CSX Gevo!

Рет қаралды 43,436

4 жыл бұрын

The widecab met the shrimp widecab at track speed..
Note Shot was set up from crossing 5 min before train ever got on scene. Even on a stupid shot idea, play it safe..

Пікірлер: 94

@BmdZero 3 жыл бұрын

I love how the model didn’t even tip over the entire time.

@electricgaming9914 Жыл бұрын

Props to the camera man for staying so calm

@TrainsandAdventuresTV 4 жыл бұрын

Ho scale Gevo: Daddy, is that you?

@joahder5460 Жыл бұрын

csx train: yes

@fathimashyama2323 3 жыл бұрын

Ho scale gevo: daddy🥺 Real csx:I love you son

@nicholastrainssd75m45 4 жыл бұрын

That must have been scary for the Ho scale gevo 😂

@greatsmokymtnsrailfan 4 жыл бұрын

LOL XD

@bluebellsfan8704 2 жыл бұрын

And the camera 😂

@kevinrichards3288 Жыл бұрын

The little engine that could

@idlecrafter7911 Жыл бұрын

Broo you say it might be scary.. It was so scary that GEVO peed his tank. 🤣🤣🤣🤣

@sabsfabs4605 3 жыл бұрын

At least it was safe

@brianh8320 3 жыл бұрын

That fuel tank clearance with the crossing though.

@tehangrybird345 3 жыл бұрын

The HO scale is like: it’s a giant!

@TheRailroadCrossingChannel 4 жыл бұрын

*This is what KZfaq was waiting for!*

@NERRP2017 4 жыл бұрын

Model CSX gevo: daddy is that you CSX gevo: I am not your daddy Model CSX gevo: daddy hi CSX gevo:your not my son get runneth’d over Model CSX gevo:noooo I am dying I am ded ooof Beeeeeeeeeeeeeeeeeeeeeeeeeep! *ded*

@veniciocaldas1514 2 жыл бұрын

very funny 2 csx trains being as the same

@Railroadracer49 Жыл бұрын

That gevo is gonna need a lot of therapy after that experience 😂

@syedowais1607 3 жыл бұрын

At least the ho scale version was not crushed and it is safe

@kevinrichards3288 Жыл бұрын

Awesome how that little HO scale model engine didn't even move when the real train went over it at a lightning speed. The little engine that could.

@kevinrichards3288 Жыл бұрын

The speed that train was going, this is like the railroad version of Days of Thunder.

@minnesotarailfan11 Жыл бұрын

The camera man never dies

@csx9763 2 жыл бұрын

absolutely amazing 👏

@pacificproductionsofficial 4 жыл бұрын

Hey SCL3618 I may have made a slight misjudgment in my video of my MTH GS4s pulling power, it isn’t the engines fault at all, it was warped track and uneven floor, sorry bout that :/ it’s still a good puller tho

@SCL3618 4 жыл бұрын

No worries! Still got a good burnout video from it though lol

@pacificproductionsofficial 4 жыл бұрын

👍

@ethanroberts3275 3 жыл бұрын

When people say that kids look like their parents

@GGProductions-wk5if 2 ай бұрын

This is the exact definition of “father and son”

@Lmn261 Жыл бұрын

CSX TRAIN: We are going tunnels Train toy: nooooo!!!

@mgr_video_productions 4 жыл бұрын

Great video! What company makes this HO scale GEVO? Also why are the trucks and fuel tank silver? To my knowledge they are suppose to be black on CSX units.

@hakeemsd70m 2 жыл бұрын

The GEVO locomotive is made by GE Transportation, originally owned by GE but sold to Wabtec a couple years ago.

@ADpre Жыл бұрын

Probably Walthers , Bachmann or Kato

@NorthCountryTrains 2 жыл бұрын

This is a new one to me... congrats on the idea

@cindystogianoglou4554 3 жыл бұрын

I think the little train is ok

@ickyzachattack 3 жыл бұрын

Model gevo, why am I stuck here? Real gevo, (yeets over model gevo) Cute!

@reptilianxlol934 4 жыл бұрын

Almost had a heart attack, the train almost got wrecked😱😱😱😱

@West_Coast_Gang 2 жыл бұрын

It’s ok it’s on the center on the ties, and Lowe than the crossing

@piegon8063 3 жыл бұрын

The front looks like a c40-8w

@YourLocalRailfan Ай бұрын

ITS A CSX GEVO ☝️🤓

@ryanchannel8485 4 жыл бұрын

In the thumbnail I didn’t see the gevo I thought u put it on the rail lol

@Major_Tom98 3 жыл бұрын

Looks like 982 met his big brother.

@ewoodrailway 4 жыл бұрын

Lovely loco, I've subbed

@limasteampowerproductions1188 4 жыл бұрын

Pretty neat!

@bluebellsfan8704 2 жыл бұрын

Wow! Awesome

@ntrainny 4 жыл бұрын

I wish i had a go pro so I could do those cool stunts

@AdaCountyRailfan Жыл бұрын

My anxiety during this video: 📈📈📈📈

@Eli_J_G Жыл бұрын

If the train had a dragging equipment defect, you might be down an HO GEVO

@SCL3618 Жыл бұрын

Would have whacked the crossing first, engine was right off the paved section. It was a troublesome project chassis, so I honestly wouldn't have minded much.

@XDORE 3 жыл бұрын

Cool!

@ShampootheSpider2019 3 жыл бұрын

Steam roller DA,wryyy!

@droopydiesel7928 2 жыл бұрын

The little engine is like oh Jeez what a way to die

@MidwesternRailfan 4 жыл бұрын

CSX GEVO playing leap frog with his smaller cousin lol.

@markfryer9880 3 жыл бұрын

I can guarantee that with the higher costs for model railroad stuff Downunder, you wouldn't consider doing this with new equipment.

@SCL3618 3 жыл бұрын

For a lower end Walthers engine that was proving to be a headache- had to purchase 2 engines to complete the project in mind, this was just the leftover shell and chassis missing parts they would never return my requests on- I had no issue letting it take a side adventure. Good reason you didn't see anything of high value staged up!

@West_Coast_Gang 2 жыл бұрын

Cool

@nativeafroeurasian 2 жыл бұрын

If I did that I'd always fear the real train derailed right over my model

@railfan6116 4 жыл бұрын

lol cool!

@sogartransit1151 2 жыл бұрын

😳two Gevos😳

@StormChaserMarc 3 жыл бұрын

: little sx train d-daddy is that you? :big sc yea son time to die :little sx NOPE

@notch8c40 2 жыл бұрын

son sneaks into dads job

@christherailfan5851 3 жыл бұрын

any reductions

@Chervodafolf 4 жыл бұрын

That’s funny

@ntrainny 4 жыл бұрын

That looks like a N gevo

@northernohiorailfanningpro8899 3 жыл бұрын

HO scales it’s all perspective though

@vasolama4543 2 жыл бұрын

Walthers mainline ho scale gevo

@ShibaaOSC 2 ай бұрын

“ It’s a CSX GEVO! “ 🤓🤓🤓

@AtlanticPancakes Жыл бұрын

if the word "risk" was described in a video

@SCL3618 Жыл бұрын

Not too much risk when the pavement is essentially the windbreak, both did just fine.

@lil_wynstan1444 2 жыл бұрын

Train Bell Hard

@FPHfan-pz3th 3 жыл бұрын

Ho scale csx: daddy wait for me plsssssss

@TrainsandAdventuresTV 3 жыл бұрын

I feel like you stole my comment

@FPHfan-pz3th 3 жыл бұрын

It’s kinda slightly different

@thumperjdm 3 жыл бұрын

From the hilarious mock-umentary, "A Mighty Wind." A model train enthusiast talking about his hobby to a not-too-bright person at a dinner party: "I collect model trains. It's a passion of mine." Response: "Thank God for model trains...or they never would have got the idea for the big ones!" ;-))

@Petemonster62 2 жыл бұрын

Thumperjdm - Oh yes! Micky & Maude - the Folk-Rock duo! Maude's husband is showing Micky his G scale layout. I don't know if it was intended for railfans to catch, but the beginning of the layout scene has a fast-moving Shay!

@ADpre Жыл бұрын

Poor little train

@thomasboese3793 3 жыл бұрын

If you're going to go stupid, go big or go home. Next time, a loop of track with engine and caboose moving the whole time.

@markfryer9880 3 жыл бұрын

Oh God no! With the way that the camera was bouncing around, I am not happy with that idea.

@Am_ati14 3 жыл бұрын

nooooooooooo

@cooperluna4137 3 жыл бұрын

Didn't that cost alot

@SCL3618 3 жыл бұрын

It was leftovers from another project engine I got for cheap.

@cooperluna4137 3 жыл бұрын

SCL3618 ok lol

@vuurvrrailfanner4656 Жыл бұрын

I would do this with a spare engine

@SCL3618 Жыл бұрын

Precisely what this engine was.

@vuurvrrailfanner4656 Жыл бұрын

If i found out a NS SD40-2 was gonna go by i would put a spare bachmann NS SD40-2 Ho locomotive in a safe area so that it doesn’t knock it over and maybe go in the wheels

@bkriegel95 10 ай бұрын

Yeah would not have done that. Too many risks

@SCL3618 10 ай бұрын

No risks when you're ready to toss the engine out for parts lol

@bkriegel95 10 ай бұрын

@@SCL3618 could sell it.

@SCL3618 10 ай бұрын

@bkriegel95 When you've spent 2x the price of 1 engine for a project and the other chassis started acting screwy, I was more than ready to get rid of it. No chance of recouping the cost of a sound decoder out of it.