I've never really been into EQs. But I said screw it and bought an clarion EQ. I've had it about a month, just decided today to try it out ya know before making it final. And holy shit.....world of difference. Basically full tilt no distortion at all. CLEAR AS ALL DAY! I mean my system sounds Good, but that EQ just put the icing on the dam Cake!

back in the day, we'd use the aux input to plug your phone into via rca stereo × 3.5mm jack. A vcr, dvd, etc audio output cables also could be plugged into the aux

I have that exact oscilloscope....it's nothing short of amazing

Very helpful vid bro 👍🏽 thank you.

The one thing none of these many manufacturers of these EQs doesn't do that I wish they did is put a contrasting color on the knobs as an indicator. I have an audio legion version and a skar and use the A.L. one in my truck because it has chrome knobs vs black and I was able to use a sharpie paint marker to fill in the tiny dots they put as indication.

Great video sir keep up the good work 👍 🙏🙏

Hi, thank you for the review. please confirm me one thing, whenever i turn the volume up, the factory unit reduces bass. also if i use factory unit builtin amplifier to increase bass, whenever the bass hits, al the rest of the song dims down, i dont know what to call it. but whole mid and high range lowers when bass or kick comes in. the only solution i think would work is if i have two amplifiers, one 4 channel for speakers, and one amp for sub. and factoy amp will be flat or even with lower bass, so it damage the whole song, and i can set the gain of sub from the sub amplifier. this way i hope it will work, i havnt applied it yet. researching on this, i came accross this eq. and i am hoping that it takes the factory signal and whatever we set on it will not effect the other frequencies. like whatever the volume, bass knob up, the rest of the song will play at equal level while i'll get increased bass. please confirm this. Its like side chaining in music production when they sidehcain kick or bass the other frequencies ducks down. thanks

I’m really diggin the EQ!

Bought one having so much trouble with it. Subs wouldn't make the pop sound when you turn off the radio now it does . Hard to tune it as soon as I turn it up the sound is so loud and bass as well

I thought I was the only one with the Bluetooth idea. Kudos

Is this a good equalizer.? What's the best one on the market right now how about American bass equalizer are the skar equalizer

So, my head unit has 3 sets of pre-outs but the head unit is only putting out 2 volts through them. Which pre-out from the head unit would i connect to the EQ input? The one that i would otherwise use as the Front pre-outs?

I bought this today I also have the Rockville too

I have a Bluetooth receiver in my vehicle instead of a headunit. I am using RCA splitters to run signal to two amps. I'd like to have the EQ for more control but I'd have to shove it under my seat so I didn't have to look at blue lights. That o scope is gonna be my next buy.

Would have been nice to know where on the volume setting was the place that it clipped? Around 12 noon, 2 o'clock, etc. Seems like you had to turn it way down before it wasn't clipping.

I've had one of these installed in my main dash console for about 6 months now. But Ive noticed I get mad interference whenever my phone is within 2 feet of the unit. Any suggestions as to what I can do. Besides just getting a dsp. But I like being able to actually adjust knobs for the frequencies.

Was there gonna be a part two of this? Or are the ratings the same on the auxiliary channel? I would actually be really interested in using this with a Bluetooth adapter or something similar and essentially using my phone as the head unit. For now just use it in my Honda but eventually throw it in my Comanche for a front stage and what ever sub I can fit for the minimal space I have in that lil truck. Oh also have you had a chance to measure the length and depth??

I run an Audiocontrol Three.2 eq that has a 9.5v rms/ 13v peak output and a Fiio BTR5 bluetooth reciever in my set up. I found that there are only 3 or 4 individual designs being used for the budget eq’s. All the different brands use these basic designs and they all have some sq or grounding issue. While all the equalization bands available in the cheap units are attractive, the truth is that they all built to a price and some are poorly assembled. The audio control has gain setting controls, three different input paths, selectable balanced inputs, and is built like a tank. The BTR5’s 11 band equalizer makes up for the Three.2’s limited eq bands.

Is a stand-alone EQ still relevant in 2022? What are the added benefits over using the OEM Head Unit eq? Would this be able to remove the need for a LOC?

Can i use this in my ps4. I have a 3.5 jack headphones and the sound is too crisp(needs a lot of eq) in pc i can use equalizers, but un ps4 ther no software for that, so my idea is to eq the the headphones with this and take that audio to my ps4 through the jack 3.5 of the headphone. Anyone knows if that is possible?

Just like the Rockville r7eq

Ct sounds eq vs clarion eq Which is better?

Thanks for the review. I came here for parametric EQ. It seems that the manufacturer has no idea what one is (or they just like scamming customers).

Nice

This vs skar audio eq

Could I use this as a lpf for subs?

No faders on EQ sucks

I always use eq

Can you hook this up to a factory radio??

Where is the Q control? is that even a true Parametric? it seems to be mislabled and its a graphic eq

Why do companies put "parametric eq" on graphic eq's? An eq without the ability to adjust the "q factor" can never be a parametric eq

This product can be used in malaysia ka??

I wouldn't know why someone would want to use one of those dinosaurs when we have DSPs in today's world

Hola 😮😮

4.5V clip is pretty shitty. VU standard eq clips at +20 dBu. 5V is ~ 16 dBu.