An actual uninstall and Install with start to finish steps! Seen a lot of vids where it’s remove this bolt then cut to next segment “okay guys now the car is completely apart” glad to see thorough step by steps much appreciated!

Looks legit, gotta say that i think all of your editing an camera work are usually very good, but lighting is def on point now!

I just installed this on my 2016 Jetta sport and being the only modification to my car, it is so worth it.

I just installed this exact intake in my GLI. I likely couldn’t have done it without this video. Thanks!

Installing on my 2017 GLI currently. Definitely a helpful video!

Sounds amazing!

I used locking needle nose pliers for the turbo coupler. It freed up one hand. I'm old school.

Awesome video, y’all did great and made my install easy good tip on the making the bolts/screws accessible

WoW sounds more powerful 💪

All I know is that it had something to do with the old air intake connecting directly into the air filter box because it was one of the first hoses that needed to come off.

This was the only helpful video on how to get that dam hose unclipped on the main tube on the back. Thank for the tip.

Great video. Have the same car. Did you do anymore vids on this car? Best how to I've seen.

Good video. Just need to add the different torx sizes you use to remove the box and other tools needed to put the heat shield together.

For real legit good information

so helpful!!

Jamo & Ginger upon introduction? Subbed!

Hey I just did this install today, everything went well but I have a question and I wonder if you can shed some insight. When you're removing the T25 that holds down the air box, you mention it doesn't come out all the way. How do I mount the elbow pipes feet to that screw position? Do I just Yank it out?

where does the mass air flow sensor connect to??

I noticed you said the hose in the back for the vent case had to be trimmed as well .but since y’all didn’t show it was it just to long or what like does that have to be done for it to fit . I just added this but don’t want any issues I thought everything just connects to stock without modification

Thank you for confirming my 14 TSI is indeed supposed to sound like that 😂

Hey Josh, great video really helped with the CAI install on my MK6 GLI. Now I have a question, installed this exactly a week ago and now I've got a CEL with a P2004 code- intake manifold cylinder 1 remaining open. Any thoughts on if this is related at all? I think it may be covered under ext. warranty but before I go pay the hour mechanic service fee I'd like to get your opinion. Car runs great boost kicks around 2400 RPM like normal in 3rd and 4th, I notice a subtle engine strain when downshifting to second but the power is still 100% there.

I just bought a 2014 GLI CPPA MOTOR and I'll like to know if is the gen 3 too

Can Anyone help me find the mapping sensor for the 1.8t gen3 on my passat!

cool car

do you have to mess with the MAF sensor?

Hey, i have a 2018 skoda octavia 1.8tsi with same E888 Gen 3 motor, do you think it will fit on my car?

I have a jetta sel tsi where do I lactate the turbo on it and and a different question what type of coolant do I use in it?

Have the same intake (not installed yet) for the same car. And now have the opportunity to get an AWE Touring cat back exhaust for good price. Do you think these parts will work well together on a stock no tune car? Thanks Shaun PS Best how to video I've seem. Excellent work.

Should I tune my VW Passat after installing this aftermarket turbo?

The link for the parts says page not found. Could you update it? Thanks. Great video

Hey great Video guys... Look I have a Jetta GLI 2017 2.0 tsi Can I install the same CTS turbo intek that you show in your video??

What is the best of cleaning the CTS Intake filter?

Hey I’m getting a Jetta mark 5 Jetta and I really like your videos and I’d enjoy to see more aha like possibly changing the steering wheel and exhaust sound aha

I installed mine. Yes there is a difference in sound. But not close to this, any reasons why?

How much is the performance difference?

hello nice car you have video of the golf cabrio greetings bro

Show how you guys place a blow off valve on this specific car because I’m struggling with mine

Hi. I have the same engine and the intake after the turbo have oil. That's in the maf end make it the engine light on. Is it normal to have aoil in the intake after the turbo?

What tools did you use exactly?

Hey, you mentioned what sounded like a "breather filter" at 8:12 and that it didn't come with the CTS kit. Is this something necessary to get as the car didn't originally have one? Or was it just a nice thing to update? Would this be it? www.moddedeuros.com/products/cts-turbo-sai-breather-filter-billet-adapter

Anyone else ever get a p0303 misfire code? Changed spark plugs and third was a little dirty but still getting same code on and off. Thx

On this same engine you guys should show is how to instal a hybrid bov/dv

Would this void my warranty on my 1.8 tsi passat.?

Does that car have a bov on it?

Hey quick question, I’m new to the VW world, do you need a tune after installing the intake? Coming from a Subaru owner, knowing I have to do a tune after for almost everything on Subies?

I made a mistake and did not connect the vacuum line that goes from the bottom to the Intake Solenoid, only took me 2 days to realize though. There any chance I messed something up or should I be alright? No engine lights or anything. 2.0T.

Hello, i have a 2015 jetta SE and i just got the EPC sensor? Can i fix it with my regular mecanic or should take to the dealership?

Is a catch can REALLY necessary for the blowback that can get into the turbo?

The 1 inch breather filter you talk about at the end.. you clip into the small hose that you pull off off of the original filter box? And it just hangs there? Mine seems like it was only really fastened by the connection to the filter box..

Just spotted the “welcome SoWo” banner in back and got super sad. I miss Hellen 😢

There was a thin hose on the original stock that was positioned to the left side of the air filter casing. The other end of it connects somewhere to the engine. I've watched several videos of different types of air intake install they either mention to take it out or it is never mentioned but at the end result it has been detached from the old air filter casing. My question is that no one ever mentioned what happens to that hose. Is it just left alone unattached or does it need to be plugged? Just not sure what to do with it. My 2016 VW Jetta GLI 2.0L does not come with an SAI inlet and I thought that thin hose had something to do with it but it wasn't the case.

do you know if the 2.0t air intake will fit the same?

Do you have the CTS throttle pipe also or is this just the CAI?

Does it fit for 1.4t jetta mk6.5 ?

Why add a different filter? Does this improve fuel consumption?

I have the “breather tube” on my mk6 gti. didn’t completely understand what you guys said in the video, is it possible just for me to leave the tube hanging or is there something additional for me to do

Where does that connection at 5:00 go or connect to? I know it connects to the top of the OEM Air Box and I noticed you guys just tucked it away after installing the CTS intake.

From cts do you know the exact part number thanks for the video to bro...

Can you tell please was Gen 3 engine on Jetta mk6 2012-2013 years or it was gen 2?

What is done with the SAI inlet hose? I want to build a cold air intake for my EA888 and it's the last thing stumping me.

Quick question! I got a 2012 Jetta 1.8 TSI, everytime i turn the AC on it smells like gas, what do you think the problem may be?

I’m having a lot of trouble trying to remove the pvc hose from the intake pipe

You stated in comes with the intake adapter. What is this part look like? Thanks.

Are there performance cams for this gen 3

does this need any kind of reprogramming the car system

Grandioso video. Perdona el idioma. Tenemos un mk6 gli y me encanto la instalación de intake. Donde puedo comprarlo?. Tienen la página o el lugar para comprarlo?. 🙏

could you explain the breather filter a little more. i’m a little confused @8:12

Will dad into a fit the WV cc 13

Did you do anything special to remove the PCV Hose from the intake pipe? I can not pull that hose off at all lol. It seems like you pulled it off so easily.

Video starts @ 2:30

Did you leave your maf unplugged or did you reuse the old one?

Do I need turbo for this intake on my 2003 Volkswagen Jetta Vr6?

Sounds much better but are there any real performance numbers to support this?

Just a quick question, is the breathing filter important or can it be left open like in this video.

hello josh. i have the same car and engine. i want to install a cold air intake and im short on cash so i went with a generic one where i plan to replace only the airbox area and keep the rest stock. i just want to make sure that it will work. if i fit it correctly, will not having the sai inlet negatively impact the car? what does it even do? also i noticed on my car (im sure its on yours as well but im not sure if i saw it nor did you mention removing it) there is a super small rubber tube coming off of the left side of the air box and going into the engine if i remember correctly. what is it? what if i dont have one? super long comment but your help would b e appreciated. thank you.

I have a seat leon mk2 tsi 1.4 but the turbo is at the front not the back of the engine like the Golf. Can i put the CTS?

What is it called at 8:20 ? Is it necessary to?

So I accidentally broke the PCV hose when installing this on my 2014 gli gen3. Is there anywhere you know of that sells that specific hose for my car?

just curiosity.. i know with the aftermarket intake the sound increases. but, has anyone tried leaving the stock rear pipe and just replacing the air box with the CTS filter?. i really dont see much of a difference between the stock n the aftermarket pipes. Any thoughts?

I have a 2012 gli, would I need the SAI adapter?

I have a ‘17 Passat R-Line, is a tune required? I’m barley getting into VW’s or just cars in general! Also you guys earned a new sub.

will this intake fit a 2014 mk6 gti with no tune?

when i ordered it off of modded euros, it said it fit my car, now i have to drill a hole into the pipe going into the intake😅

Can I follow this same video with a 2014 GLI?

Cts also has an outlet pipe, so I’m guessing that’s opposite of the intake? Worth getting that along with this?

Will this work with a Jetta 1.4t tsi 2017

did you need to install an SAI kit?

Would anyone know why I am missing the hose for that smaller breather filter? It has never been touched before. Do some Jetta versions come without this? Do I need to install the secondary breather filter or am I okay without it? Please help.

I’d love to do this i got a 14 jetta S would i be able to do this?

Hey quick question guys anyone can answer this I’d be extremely grateful I have a P0045 error code What the hell am I looking for I have not been able to find anything resembles a Solenoid coming off my turbo turbo I’ll have a Passat 14 1.8

Do you need a tune for this?

Hey guys, I just installed the intake on my 15’ jetta 1.8t and the check engine light came on, I checked everything and everything is tighten up... I noticed the rpms kinda bouncing when idle the engine... any idea???

What’s the small hose going into the air box from the block? What did you do with it?

Where do both secondary air pump hoses get connected to ??

does the stock come with a pressure sensor in the box, do we need that for the install? if so, where does it go?

Doubt I’ll get a reply but would the 1.4t be roughly the same install as well??

Ik this is an old vid, but how much was it when u bought it at the time? Also would u say getting a breather filter would be good as well?

What are those headlights?

What is the rubber tube do that you unplug for old intake should I take it out ?

Any for jetta gli 2018