Cubase 12🎚MIDI REMOTE🎚ULTIMATE GUIDE from START to FINISH! Supercharge your Existing Controllers!🎚

No video

Cubase 12🎚MIDI REMOTE🎚ULTIMATE GUIDE from START to FINISH! Supercharge your Existing Controllers!🎚

Рет қаралды 36,630

Dom Sigalas

Күн бұрын

Пікірлер: 254

@TimothyDempsey Жыл бұрын

I'm not drinking from the KoolAid anymore. The MIDI spec was supposed to make this easy and I have lost hours trying to get this to work with Novation's flagship controller. Steinberg has failed us for years on MIDI Remotes; that it was a huge selling point of Cubase 12 burns me more. You seem like a decent guy Dom, this isn't about you personally, I love your videos and energy.

@GudeDoc Жыл бұрын

Dom you have a very clear speech. I understand every word you say even when you talk fast. When I watch films in english (i.e. Monty Python - Life of Brian) i often have to look at the script :).

@bobomellette 2 жыл бұрын

Definitely, definitely, DEFINITELY would love a video on Quick Controls! Love everything about this channel... Thank you!

@ray.watts.44 Ай бұрын

Great video, thanks Dom. A Quick Controls video would be really useful to complete the picture of how all this works end to end.

@falconshield 2 жыл бұрын

This is incredible. I've got a few Monogram modules and I love them. This is gonna tip me over to getting 12 right now.

@amphidrome 2 жыл бұрын

Yes, a quick controls video please. Really enjoyed this one. Thanks.

@ferreirabrice9022 11 ай бұрын

Dom, my friend, i've been following your content for a long time. Once again, you explain things with efficiency, joy and simplicity. Much much love from France ❤

@jameslarot6292 Жыл бұрын

Hey, Dom. Awesome video presentation as always. I just got my AKAI MIDImix CUBASE DAW controller this week and I really liked it. It took me a while to set it up since I had to find all the documentation to follow. AKAI doesn't really have a good thorough step by step process in setting it up for CUBASE but only for LIVE 11 and other DAWs in the market. This seems like a product bias which is not a good marketing tool for AKAI. I've already seen some users who purchased it and returned it back to the seller due to inadequate documentation. I had to do a lot of research to find good written documentation online and I found M-Audio had one for CUBASE DAW setup for the MIDImx. However, I was able to setup it up by following M-Audio's instructions and finally got my AKAI MIDImx USB hardware to work but not completely until I watched this video of yours which you added more steps to its functionality. Thanks for sharing your video and take good care.

@avantgardesoldier 2 жыл бұрын

This is exactly what I need to know! Dom you rock

@KairoosProducties 3 ай бұрын

Hi Dom, since I have discovered this channel I have learned a ton of info from you. I have recently bought a cheap controller: EZ-Creator Fade (Devine) and I was not sure of how to configure this in Cubase. With this video a new world has opened to me. I will be starting to assign the controller to all my things. I can even put it on my keyboard and start recording with the press of a key. Thank you for this. I have a suggestion: make a course or training online for sale...

@backtonaturestudio8408 2 жыл бұрын

Dom I appreciate your content, keep making awesome videos! I been producing for 18 years and each time I watch one of your videos I Iearn something New

@milenadeltorto7158 2 жыл бұрын

Thanks Dom. Please do a video of Quick Controls.

@v.miguelsilva9227 6 ай бұрын

I LOVE CUBASE!!!!! I was strugling with the mapping of my Oxygen Pro 61... I just made a template for the Mixer, I gonna spend a lot of time making templates on Cubase 13 :)

@minihilly 4 ай бұрын

Hey I got the same controller. M-audio's "how to setup for Cubase" guide is useless, I ended up making a custom preset in the oxygen pro preset editor instead. I know how to make the Oxygen Pro's LEDs work for proper LED feedback as well but am yet to implement this as a Cubase MIDI Remote Script.

@Tupac_Shakur-NL 2 жыл бұрын

i used it for my Korg Kronos thanks Dom

@svenisaksson3970 2 жыл бұрын

I agree, that MIDI Control is an excellent feature. However, there is one important thing you fail to mention. That is how to get Cubase feedback with the contoller. Let me give you an example. I have a Behringer X-Touch One (which I use strictly as a transport controller). This has lit buttons. When I press the "Cycle" button on the X-Touch, it lights up and "Cycle" is activated in Cubase. If I press the button again, the light goes out on the controller and "Cycle" is deactivated in Cubase. If "Cycle" is activated in Cubase and I click the "Cycle" icon on screen," Cycle" is deactivated and the light (on the button) goes out on the X-Touch. This is how it supposed to work and it does, just fine, under Mackie Control. However I can't get it to work with MIDI Control. I can activate and deactivate "Cycle" in Cubase, but I can turn off the button's light, once it's lit. I get the feeling that this is a communication issue, with feedback from Cubase to the controller. Don't get me started with the transport controls (play, rec, stop, etc.) If you decide to do a follow-up video, it would be appreciated if you looked into this. Perhaps you'll come across a solution when you make profiles for your other controllers.

@DomSigalas 2 жыл бұрын

Hi Sven, I see exactly what you’re talking about. The reason why I didn’t touch on this is because the controllers I use just meant to transmit, not receive from Cubase. I didn’t touch on that in this video- I mainly focus on CC controllers. For something like the X-Touch I would use it’s proprietary protocol (MC) like I do with the CC121. I don’t know why you would want to use this as a generic controller since it already supports Cubase with Mackie Control. Is there a specific reason?

@svenisaksson3970 2 жыл бұрын

@@DomSigalas Why don't I use the X-Touch with with MC like you do with your CC121? Actually I do, but it's a total mess to set-up. One big issue with MC is that every manufacturer has it's own idea on what note#/CC should reference what parameter. And the manufacturers are louse on sharing this info! It's a detective work worthy of Sherlock Holmes to track down the correct information. Cubase and your CC121 is made by the same company, so there probably is some parameter correlation. Cubase and X-Touch One isn't, so there is none. The great strength with Cubase's MIDI Control feature is that I don't have to worry about what MIDI messages the controller sends. It's all "connected" in Cubase. That's why it so easy and fast to program. I could probably write and record an album of songs in the time saved, by not having to mess with MC programming. Another thing is that, with MIDI Control, I can program Pages. And thereby multiply the cababilities of the controller. Something that can't be done with MC. As far as the feedback is concerned. It imortant for ANY controller that has lit buttons. Including your Monogram controller. At approximately 19:40 you show how you've programmed three push-knobs to turn on/off the FX sends *. However, to see whether they are on or off, you need to have the Track Settings (or Mixer) window open. That is an extra distraction. If you have the on/off status feed back to the Monogram, you'll be able to see if an FX send is on or off by just glancing at the controller. As this a basic funtionality of any controller controller (!?) feature, I'm sure it's possible with MIDI Control. I just havn't been able to figure out how (yet). * This is actually a great idea. If you don't mind, I think I will "steal" it from you. ;)

@KeyLockBeats 2 жыл бұрын

I'm just glad that we can finally assign a midi controller to pregain easily now lol

@blokeofkent82 2 жыл бұрын

my monogram controller arrived yesterday (after a 3 month wait) so this vid was a godsend thanks Dom

@DomSigalas 2 жыл бұрын

Have fun!

@Zorn2bealive 2 жыл бұрын

Definitely a video on Quick Control Dom, that'd be fantastic!! Thanks for so many user-friendly videos!

@ifhpp 2 жыл бұрын

QUICK CONTROLS Yes please Dom!

@ardierr.2525 2 жыл бұрын

thanks! next step steinberg please let us map vst parameter (without using quick control) and dedicated page dynamically load per vst (take a look at studio one)

@andesneko 2 жыл бұрын

As long as they don't quit QCs, I am all in.

@DrBuffaloBalls 2 жыл бұрын

Hey Dom, great video, but I have a few questions that I'm hoping you can answer. In Cubase 12, can you assign project horizontal zoom, vertical zoom, and waveform zoom to faders/knobs? This is something that isn't possible in Cubase 11 with the Generic Remote Editor, there are only separate parameters for zooming out and zooming in instead of a general zoom parameter, due to which you can't get a fader to function as a control for it. I know I could map these features to buttons, but I'd much prefer a fader/knob. If you could check if this is possible I would really appreciate it.

@Tonetrax 2 жыл бұрын

unbelievably cool video. exactly this video is once again the reason why i'm getting a controller with many knobs, so i can control e.g. the channel EQ or various vst plugins. after this video i'm not too worried about not being able to do it :D

@lipstickspeedball 2 жыл бұрын

Me Too

@ApiaryProductions 7 ай бұрын

It’s great but it’s got to have the ability to program shift functions (and not by creating additional mapping pages)

@jeremyharker8412 2 жыл бұрын

Excellent tutorial, was able to set up an Akai APC40 which has not been getting used much at all. It is fantastic having 8+1 well built channel faders and able to arm record, solo, mute, and monitor at the press of a button, per channel. Top 8 dials are setup using your Quick Control idea. Also setup individual monitor/phones on/off switches for click audio, and 2 of the remaining 8 dials for click volume. That is super useful! This and your control room setup video have been incredibly helpful. so thanks 😁

@Somedei 2 жыл бұрын

Not for me, but here you have a comment and a like ! Your content is Gold 💚

@DomSigalas 2 жыл бұрын

Legend!

@Somedei 2 жыл бұрын

@@DomSigalas 😘

@taalmuzica2048 Жыл бұрын

Thanks ---

@sorenz1837 2 жыл бұрын

Hi Dom! Please do a Quick Controls video!

@MoonhareStudio 2 жыл бұрын

This is a game changer for Cubase 12. Just upgraded and looking forward to digging into this.

@wiseoldfool Жыл бұрын

"Game changer" has become a cliche, but I agree, this is a game changer.

@donaldeaston9564 Жыл бұрын

Dom, like the video. I’m using Cubase 12 Artist. I’ve just bought an M-Audio Oxygen Pro 61 interactive Keyboard. Yes it does the basic function mapped. Knobs are used as Panners. Sliders work as you’d expect. Pads are very basic. Saw some reviews that say the Pads aren’t great. Do you do any videos using Cubase 12 along with the M-Audio Oxygen Pro 61. There must be other things I can add…even to assign pads for selecting Instruments. As you know, the instrument page shows lots of onscreen knobs, that I’d lobe to be able to adjust via the keyboard. I should say, I’m a retired Haematologist..not a sound engineer. I’m current playing. Thank you, Donald Easton.

@MustacheVerra Жыл бұрын

Thanks Dom.

@onkel_muetze 2 жыл бұрын

WOW, thanks Dom!! I´m also use the Monogram CC with Cubase. It´s really nice and, thanks to your explanation, now I know how I can set it up. I´m really happy!!! I also interested in a video about Quick Controls.

@mikemccormick1624 Жыл бұрын

Fun, informative, brilliant, valuable. Thanks for another great video, Dom!

@kenvives 2 жыл бұрын

Thanks so much Don! The info on pickup mode and the pre fade volume solved two of my biggest issues!

@DomSigalas 2 жыл бұрын

Glad it helped!

@BabyLullabiesMusic Жыл бұрын

Thank you Dom!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@ontrackrecstudioavk3881 Жыл бұрын

Hello Mr dom I am always watching your videos and very like it you are really great I learn many more about cubase from you thank you so much

@johnwishman240 Жыл бұрын

Dom, thank you very much! My suggestion to Steinberg for developing this direction is to make LED feedback in MIDI remote for devices like Launchpad, Akai APC / Akai Fire.

@MartinVipond Жыл бұрын

I have watched this tutorial a dozen times. I have my LaunchControlXL doing amazing tricks for me now. But I need CC11 and CC1 on two faders for expression and modulation. I can't find how to do this. Can anyone jump in and give me a hand with this? Dom? I am a convert from Logic and I love Cubase for Orchestral composing. Dom, you are an inspiration and have helped me climb way up the learning ladder! Thank You!!

@davidfaye-hansen4663 6 ай бұрын

It would be awesome with a video about Quick Contol

@sandipbanerjee5398 2 жыл бұрын

Please make a video about how to upgrade from elicenser based product to steinberg new licensing system or please share the link if any video has been made already. Please 🙏

@alainpatry 2 жыл бұрын

Would love to see you tackle the Komplete Kontrol - it's listed under Legacy in the Remote MIDI devices so maybe we have to delete it from there and rebuild it in Cubase using this new method? Cant find much on what we can do with the KK since this feature came out.

@DomSigalas 2 жыл бұрын

It works exactly the same way with KK :) You just need to set it to midi generic mode (not NKS) and then it should appear in the list of midi controllers. Then you can start mapping away. I think the device name should appear like Komplet Kontrol Midi or something ;)

@pianoforgodbymarounabdogho480 2 жыл бұрын

Incredible Dom thank you so much, this feature will give life to my Dj controller full of cc bottons and knob! I'm waiting the QC video too. Big thanks God bless you❤️

@covenantpiano Жыл бұрын

"When you do this, you're going to be way, way faster, I promise you!" LMAO

@geoffswan1254 Жыл бұрын

Just for those who want to use the Orbit wheel to control the project cursor. Set the Orbit to 'Keyboard Mode', not Midi Mode. Here you set a different keyboard shortcut to the left and right turn operations. Now set your left and right 'Nudge' keyboard shortuts to these in Cubase and it will now scroll the cursor for you.

@colineastwood1357 8 ай бұрын

Very useful info'. Thank you Dom.

@ErixSamson 2 жыл бұрын

A video on Quick Controls would be highly appreciated!

@starsandguitars2050 2 жыл бұрын

Man, you make Cubase fun for me. Thank you Dom. I mean it. You are just great!

@DomSigalas 2 жыл бұрын

Happy to hear that!

@yvanroustan4426 2 жыл бұрын

Quick controls video will be great too ! thank you for your video and music passion !

@GudeDoc Жыл бұрын

I had some problems with the transport panel of the Arturia KeyLab 61 sending SysEx-/MMC-Commands. I had to change the transport field knobs in the Arturia Midi Control Center not to send MMC/SysEx-Commands but CC Commands.

@jackiez1012 2 жыл бұрын

Thanks alot for the awesome tutorial Dom! I'm a big fun!hope you can make a tutorial about the cubase quick control.thanks again! have a goood day Dom!

@Byron101_ 2 жыл бұрын

What a great feature!! Cubase 12 rocks. Thank you Dom!

@DomSigalas 2 жыл бұрын

My pleasure! Indeed it rocks!

@harrytselentis6070 2 жыл бұрын

thumb up for the quick controllers video,thanks a lot Dom!

@neilfactory 2 жыл бұрын

That's good Dom THX

@DileepaMangala Жыл бұрын

Wow. Such a game changer. Thanks Dom!!

@grahamwitcher105 2 жыл бұрын

Fantastic video Dom. For me, the new MIDI Mapping feature in Cubase 12 is just sensational and the best thing about this version. The sad thing now though is that my beloved CC121 and maybe yours too, has now taken "back stage" to my other controllers, those that I always wanted to integrate with Cubase and couldn't then but now can! Having said that though, my CC121 is not for sale and surprisingly, I still find myself using it even for example, after MIDI mapping my Impulse 61. You can never get enough controllers!😃

@ilanschulz1976 2 жыл бұрын

hey, thanks for your great videos. if there's more to sy than meets the eys - then YES please do a video about quick controls!

@lofispace2384 2 жыл бұрын

Always helpful and a pleasure to view - keep on doing this Dom ,-) thx

@jorgecorante 2 жыл бұрын

Hi Dom, thank you for such a great video! As you asked re: doing a video on QC? I say yes please, that would be really helpful, thanks!

@toddbilleci8563 2 жыл бұрын

I've been waiting for this, thank you!

@Axl_Pose 2 жыл бұрын

Aha! it makes so much sense now! Thanks Dom.

@nick68music Жыл бұрын

Great video, thanks!

@user-hm2ub3ve1y 2 жыл бұрын

wow. id like to see more about QC

@Jason_Kearney 2 жыл бұрын

Thanks Dom

@DomSigalas 2 жыл бұрын

Any time!

@vsp237 2 жыл бұрын

Thank you very much Dom! And please, make a video about Quick Controls

@DomSigalas 2 жыл бұрын

Noted!

@pr4vus.studios 2 жыл бұрын

Awesome video like always Dom! Love your content, very informative. Keep on the good work!!

@MrRheemskerk 2 жыл бұрын

Thank you very much Dom, also like your Halion drum extension and your Apollo for Padshop..

@DomSigalas 2 жыл бұрын

Thenk you Remco!

@gcruishank9663 Жыл бұрын

Great explanation Dom!

@agressteve5008 6 ай бұрын

A lot of booms for just 1 video great . ..iam so lazy i have to do that to be more lazy😂 thanks for the content

@delsurmusic 2 жыл бұрын

Dom can you make a video on quick control, thanks.

@bybars3350 2 жыл бұрын

Hey Dom thanks for another informative video. I wrote to Cubase support but maybe you can tell them if we can adjust font size to the buttons, it would be great. I have Akai mpk 261 and 16 pads and 4 layer so you can set 64 commands but on screen font size which is written on button is not clear to read because of too small. Thanks

@DomSigalas 2 жыл бұрын

I don't think it's possible! let me know what support says though! If you could send them a video maybe it would help ;)

@dftweedie3021 2 жыл бұрын

@@DomSigalas Shot in the dark ... but maybe this is a 4K monitor DPI issue? On windows anyway it is easy to set custom DPI adjustment in the host program for the plugin GUIs, etc.

@mattsynth 2 жыл бұрын

Boom, that was great Dom, Thanks. BTW the encoder jitter problem is a NI Maschine only problem.

@mariodjclub8359 2 жыл бұрын

Thanks Dom for this awesome video! Could you please do one for quick control with synth vsti please ???

@DomSigalas 2 жыл бұрын

Noted!

@mariodjclub8359 2 жыл бұрын

@@DomSigalas thank you ;))))

@gonzomuller8846 Жыл бұрын

Please make a Video about quick controlls

@Boomtrooper 2 жыл бұрын

Dear Dom I was very disappointed in this overview of midi controller setup... there were several opportunities which you simply ignored where there was a perfect opportunity for "BOOM... and it's assigned!" *shakes head in despair* As ever, perfect tutorial and many thanks! 😎

@agallo121 2 жыл бұрын

Dom' awesome as always, but how about a way to quickly zoom through our hundreds of plugins? Would save time and usage for us plugin junkies. Maybe that feature is in Nuendo 12 hopefully?

@UriKleinman 2 жыл бұрын

I just got the Djtechtools Midi Fighter Twister (midi controller) and Im aseptically interested in using it for plugins so hope you'll make one about quick control. Thanks so much and keep doing great things!

@thehightenor2596 Жыл бұрын

Great video - thank you!

@tuneboxmusic 2 ай бұрын

I have two quick controls. but you did not sgowed how to setup CC1 and CC11 on quick controls. Like I see we cant do that?

@UriKleinman 2 жыл бұрын

Hi Dom! thanks again for everything, I am truly grateful for all your very useful content. I have a question about controlling the Cubase zoom function: I have a midi controller and Im trying to make one turning knob into a zoom in and zoom out function. It look like I can only assign on knob to zoom in and one knob to zoom out. how can I make it so that when i turn it clockwise I can get zoom in and the other way the zoom out? If you know please share. Thanks a lot

@lennardvillasenor5151 Жыл бұрын

Please do quick control vst video.

@C.Jirau1 2 жыл бұрын

Quick Controls video with the monogram cc please! 🙏🏼

@QuaverloveStudio 2 жыл бұрын

Once again, another brilliant tutorial, Dom. Thank you. Quick question: Can I use a controller (like Monogram) alongside an already connected DAW controller (like my Pro G2)? Is that what you're doing?

@peterj.9713 Жыл бұрын

I like that feature a lot but why are the quick controls still limited to 8 ? Thank you for that Video and your channel on YT

@RobCowie 2 жыл бұрын

Informative video Dom. Now how can I use my MIDI Remote creation for my hardware to control all the functions I want to on a virtual instrument? I just upgraded yesterday, and I'm legit confused how to get that working. Cheers !

@nikibuz1 2 жыл бұрын

dom!!!! excellent!!!!! please make a video explaning deep vst cc and track cc

@marcelcouture5373 2 жыл бұрын

Quick question : does that mean that I could build a profile to any old midi control, such as a Behringer BCF or BCF, a Tascam US2400, etc. ? Looks like it!

@DomSigalas 2 жыл бұрын

Yup :)

@marcelcouture5373 2 жыл бұрын

@@DomSigalas Well, looks like someone may be shopping on Reverb pretty soon …

@giampaologesuale5873 2 жыл бұрын

Absolutely! Midi remote brings new life to them🤩 Take a look at my script for BCR2000 on Steinberg forum...

@FedericoMcCartney 2 жыл бұрын

Can assing my yamaha cmc to control variaudio settings? I wanted to do it in the past and i could not!

@ossymusic 2 жыл бұрын

Awesome Dom👍 would love a video on the quick controllers. Also did i read that bluetooth midi was a thing in v12? That would be cool too.

@davidmcnamara7928 2 жыл бұрын

A critical thing I think Dom forgot to mention is that you can also map a control to an AI Knob function... much like what the CC121 has. Also like The Knob... though, of course, The Knob can work across all apps and Cubase MIDI Remote AI knob functionality only works inside Cubase.

@DomSigalas 2 жыл бұрын

Absolutely- I am actually planning to make a dedicated video about this to be honest- I want to get all the potential right ;)

@andesneko 2 жыл бұрын

@@DomSigalas That'd be awesome. I want to know how close to the AI knob we can get, since it is more than just a mouse hover control. The jog functionality is unrivaled so far.

@abrahamraj3172 2 жыл бұрын

Thank you Dom. I'm using Touch Osc with the generic remote. I'm waiting for Nuendo 12, hope I can explore similar setup with the touch osc.

@mattsynth 2 жыл бұрын

Thank you Dom. BTW the encoder jitter only comes from NI Maschine when using it as a controller. All other controllers work great.

@DomSigalas 2 жыл бұрын

This is strange- maybe an issue with the Maschine? Have you set it in midi generic mode?

@grailheart Жыл бұрын

I'm in Studio | Studio Setup. I highlight 'Midi Remote'. I'm not seeing any plus sign. 😞

@paulaudialterampartem6906 2 жыл бұрын

Hey Dom please show us this on your average bog standard midi controller keyboard . I have tried on mine and little is being recognised. I have noticed that the general run of the mill midi controllers that most of us have there is NO actualt demonstration. I mean your videos are a1 but how many have the Monogram cc controllers?

@DomSigalas 2 жыл бұрын

Hi Paul, the procedure I showed here is exactly the same like with any basic midi controller. There’s not much more to show to be honest :) if a controller is not recognised, this means that it doesn’t transmit a cc message- you certainly don’t need an expensive controller (or Monogram) to program Midi Remote but the controller *does* need to transmit CC :)

@paulaudialterampartem6906 2 жыл бұрын

@@DomSigalas Thanks Dom. I actually sold an old keyboard and for same price purchased the same one you were using in another video launchkey mk3 49. But i am not as all techi and i dont seem to be able to control plugins ..the other basic controls are ok. So with past failures in mind (!) i was going to ship it back this week

@wizzNarts Жыл бұрын

How can I create a Midi Controller for Novation Launchpad without assigning an output? This is important for my setup - unless this does not work I cannot give up the Generic Controller... any idea?

@MrAmeerGado Жыл бұрын

Amaaaazing

@MrDeki72 4 ай бұрын

Hi Dom, I have problem with my fader. It doesn't work and I can't assign any MIDI massage through it inside MIDI remote. What could be problem ? That is just one fader, rest of it are ok.

@tinpanalleyoldstuff6209 2 жыл бұрын

Unfortunately, this doesn't work with motorised faders (for example on mixing consoles) - The faders lock up as Cubase receives and sends the midi messages, and end up fighting themselves. In 12.10, Steinberg introduced a check box that can disable sending messages back to the hardware, but who'd want a bunch of faders that don't return to where they should be when you rewind, or follow fader moves etc. Will be good when it works though! Looking forward to it.

@etact8888 Жыл бұрын

yes Im checking this video just for this feature, seem no video is mentioning motorized fader, steinberg is really at a lost on how to handle this feature

@tinpanalleyoldstuff6209 11 ай бұрын

@@etact8888 Still doesnt work, all these months later 😞

@etact8888 11 ай бұрын

@@tinpanalleyoldstuff6209 just use mackie protocol, in midi page add a mackie control device and all is good. it took cubase up to 12 to implement a half cooked midi remote, only fader and dial work, no motor no x/y pad or joystick or mod wheel or rotary dial

@kovalexart Жыл бұрын

Thanks Dom! But if when I touch one of my buttons and cubase treat it as piano note. I deal with M-Audio Keystation 61

@Lanierlaw37379 Жыл бұрын

Can you please do a video of CC Monogram and Logic. I bought CC Monogram and Spitfire BBC Professional (after watching your videos!). I have Cuebase, Ableton and Logic Studio….and am most familiar with Logic. When I try to use Logic, the CC Monogram, BBC professional in Logic I get block cords crashing and then piano metronome…neither of which I want….I have tried setting up the CC according to the Spitfire recommendations…. I’m just a hobbyist trying to learn to eventually compose ….I have a Yamaha Montage 88 and Ableton Push 2 for other controllers. Any direction would be appreciated!!!

@Sloebydig 2 жыл бұрын

Hi Dom, I'm a fan of your tutorials. Can you use more controllers at the same time? Thnx.

@DomSigalas 2 жыл бұрын

Yes of course you can!

@CNevsPlace 2 жыл бұрын

Love your tutorials, Dom - absolutely brilliant. Is there a way to set up a knob as a Jog/Shuttle? I have been trying to figure that out for both my Monogram and my X-Touch One. It would also be great to have a joystick control for the middle of those Orbiters...