I don't know if you missed anything but, this is VERY useful
@LanewoodStudios Жыл бұрын
@@Bville-E thanks, that's great to hear.
@thomosalen Жыл бұрын
We can snap automation using the shortcut cmd+option+fwdslash in protools. Is there something similar to that in cubase or nuendo?
@BoxinaBand Жыл бұрын
Hi - thanks for a great video. Is there a way to vertically zoom in on the automation so that you don't end up making minute adjustments to a flat line (same as the tempo track where you can have the automation between a max / min value? Cheers
@joseluisrevelo Жыл бұрын
Thank you for this useful video. Once you have automated a mix, how can you lower the entire mix by the same amount preserving the automation but also lowering the channels that don't have any? Thanks!!!
@georgebutrumlis288Ай бұрын
You are the best. This is the clearest discussion of Cubase automation. Very very helpful thank you!
@LanewoodStudiosАй бұрын
Glad you like it 😎😁
@petersemmelhack Жыл бұрын
You do a great job of explaining and keeping the viewer’s attention all the way through. Very helpful. Thank you.
@LanewoodStudios Жыл бұрын
Thanks. I just cut it so fast that you’d better pay attention to not miss anything 😉.
@TakahashiJones Жыл бұрын
Just what the doctor ordered. Excellent follow-up Maarten! Much appreciated!
@LanewoodStudios Жыл бұрын
Thanks, glad you enjoyed it!
@kdcyp Жыл бұрын
I love the efficiency of your videos - so quick to explain yet so clear to understand fully which makes them a super reference tool mid project when trying to recall these methods & features! 🙏
@LanewoodStudios Жыл бұрын
Glad you like them!
@kennethlundgren433611 ай бұрын
Great!!! That automationpanel were previously a little intimidating, but now I can dig in! Much appreciated!!!
@LanewoodStudios11 ай бұрын
Great that it was useful!
@Byron101_ Жыл бұрын
Cubase has absolute great automation functions! I use automation panel and it's keycommands every day.
@LanewoodStudios Жыл бұрын
👍
@bossmusicdog Жыл бұрын
Again, very valuable. 😁 Thanks Maarten.
@LanewoodStudios Жыл бұрын
You’re welcome Peter!
@John2009R Жыл бұрын
The trimming of automation tip was very helpful. Now I won't have to add a VCA just to adjust an automated track a bit. Thanks
@LanewoodStudios Жыл бұрын
Great to hear!
@markjtapply Жыл бұрын
Thanks, Maarten! I've been using Cubase since V7 and I didn't have all of this figured out yet. Please keep these deep dives coming.
@LanewoodStudios Жыл бұрын
You’re welcome Mark. For me there’s also a lot to learn with each video 😉.
@in2gadgets Жыл бұрын
Thanks, so much, Maarten :-)
@LanewoodStudios Жыл бұрын
You’re very welcome Kenny, and thank you!
@Harrysound10 ай бұрын
You videos are extremely useful, clear and relevant.
@LanewoodStudios10 ай бұрын
Glad to hear that!
@gwgw779 ай бұрын
Awesome video like everything of yours . There is just one point missing . "Touch" mode in volume automation doesn't work as it should at least for the first pass. Fader unfortunately doesn't come back to the previous "initial" value unless you'll use a "workaround" to insert manually an automation point - value at the end of the track you want to be automated . Same is true for the trim automation . It's not a fault of yours . It is just how Cubase is working for so many years ( Nuendo is not the case for some reason ! ) . To be more clear : Touch mode NEEDS to see a value in the timeline ( the initial one or whatever ) AFTER the part you want to be automated to behave correctly ( so it makes sense to go and put it at the end ) ... As of today ( a bug with C13.0.1 ? ) you'll need to insert 2 automation points - the first at the start and the second one at the end of the track - seems like something "broke" even to the workaround ? ) ... Everything above of course is irrelevant if you just use your mouse / trackball to "draw" automation but using a fader is a different story altogether.
@LanewoodStudios9 ай бұрын
Now that you mention this I did notice this behavior later on. Good addition 👍.
@dspoet1 Жыл бұрын
I use to be afraid of the automation panel. Ima sit down with this video and practice along and take notes.
@LanewoodStudios Жыл бұрын
Don’t be afraid 😁
@TripleS65 Жыл бұрын
Well done Maarten!
@LanewoodStudios Жыл бұрын
Thanks Jan!
@teamcubendo Жыл бұрын
Thanks for your work.
@LanewoodStudios Жыл бұрын
👍🙏
@patlecat Жыл бұрын
Very helpful, thanks for the tut.
@LanewoodStudios Жыл бұрын
Glad it was helpful!
@arupsircar4855 Жыл бұрын
Dear Sir.. Your reviews r awesome.. 👍
@LanewoodStudios Жыл бұрын
Thank you!
@arupsircar4855 Жыл бұрын
@@LanewoodStudios It has helped a lot of music programmers.
@LanewoodStudios Жыл бұрын
@@arupsircar4855 👍
@marclaliberte4118 Жыл бұрын
thank you very much for this tutorial!
@LanewoodStudios Жыл бұрын
You are welcome 🙏
@mikemccormick1624 Жыл бұрын
I had no idea! Thanks for a great video. I learned so much about automation in this video that it will actually change my workflow (for the better!)
@LanewoodStudios Жыл бұрын
Great 😁
@ArielDranov Жыл бұрын
Thank you very much for the lesson I summarized part of it
@LanewoodStudios Жыл бұрын
You are welcome. Where did you summarize it?
@ArielDranov Жыл бұрын
@@LanewoodStudios At Rich text in another language Do you want the pictures to use them? (From what I did in Cubase from the tutorial)
@LanewoodStudios Жыл бұрын
@@ArielDranov ah ok nice. I was just interested to see what you did based on that video. Makes sense to provide it in another language. Great.
@pjdahmen7 ай бұрын
Great Tutorial!
@LanewoodStudios7 ай бұрын
Thanks!
@MrEMann10 ай бұрын
Thank you
@LanewoodStudios10 ай бұрын
You're welcome
@leonardovalvassori Жыл бұрын
Excellent. Thank you!
@LanewoodStudios Жыл бұрын
👍🙏
@QFXmusic Жыл бұрын
Great video :)
@LanewoodStudios Жыл бұрын
Thank you!
@gesslr Жыл бұрын
Fantastic!
@LanewoodStudios Жыл бұрын
Great!
@josemedina940 Жыл бұрын
very instructive. thanks.
@LanewoodStudios Жыл бұрын
🙏
@manos6426 Жыл бұрын
Nice!!!!! Thank you!
@LanewoodStudios Жыл бұрын
Pleasure!
@gennarosicurezza5107 Жыл бұрын
Thank you very much for your dedication, very useful. Sometime please could you provide something to learn how to use spectre layer 9 pro? I bought it but really am very confused Thanks for giving us precious information about Cubase
@LanewoodStudios Жыл бұрын
I don't own or use SL Pro myself but I did try out SL One at some point because it came for free with Cubase. So maybe that video can help you. You will just have many more features and a newer version: kzfaq.info/get/bejne/pLt4haWUv5vcmHk.html
@gesslr Жыл бұрын
It may be a bit esoteric, but any video you care to do about setting up MPE instruments and editing MPE data would be appreciated. I’ve been setting up an MPE instrument in various DAWs and Cubase is one of the harder ones to get operational…
@LanewoodStudios Жыл бұрын
Thanks for the idea. I’ll put it on the list.
@leonelguri Жыл бұрын
Excellent explanation. I have a question. Is there a way for the automation to be guided by the audio transient. I think of it to automate, for example, reverbs that follow the dynamics of a voice. Thanks
@LanewoodStudios Жыл бұрын
Thanks. Interesting question you’re asking. I have never done that actually and nothing comes to mind right now apart from using third party plugins for this. You could e.g. generate an automation track from waves Vocal Rider and then apply that automation to a different parameter (in your reverb). But if someone comes up with another option, do tell 😎.
@AndyGeroldMusic4 ай бұрын
How do I do a slight adjustment? In protools if you hold CTRL it'll do a slight adjustment
@Sheriffvlogs Жыл бұрын
Is there a way to loop a section that has automation to Rewrite it in that loop to make it Bang on. And as in nuendo, u have Preview as well.
@LanewoodStudios Жыл бұрын
Just loop the section between left and right locator and use touch mode. Then you only add automation where you touch the control and the rest remains the same. Or is that not what you meant?
@Sheriffvlogs Жыл бұрын
@@LanewoodStudios yes thanks
@LanewoodStudios Жыл бұрын
@@Sheriffvlogs excellent!
@artysanmobile9 ай бұрын
Automation is the single most complex, and often inscrutable, function of a mixer. That was true on hardware mixers and only became worse with DAWs. When a function you use for easily half of all your work involves setting of 30-40 parameters constantly, throughout the process, the application designer has failed badly. My work is virtually all in Pro Tools but the general rules apply to Cubase as well. We’ve taken the time to anticipate many actions to ease the burden of mixing, mostly in the domain of DSP processes. Even more time should be devoted to this wretched excess of controls to do our main job of mixing. Console designers worked much harder toward this goal than any DAW maker. Certain changes follow each other logically and predictably enough to program them to change themselves. To me, that is a no-brainer. Again, if 30-40 choices need to be made? FAIL. Give the mixer hardware intelligence. Not artificial intelligence, but carefully considered intelligence to take giant leaps we make all the time, for us.
@LanewoodStudios9 ай бұрын
What would you like to see changed to Cubase's handling of automation specifically?
@DiogoCocharro Жыл бұрын
10:20 I wish the channel fader worked as a Trim for the volume automation..... 🥲👐