Cube speakers solid DIY

Рет қаралды 10,798

Mat Matloch

Күн бұрын

Cube speakers solid wood DIY

Пікірлер: 51

@user-ic4kh5nq4q 5 ай бұрын

Wow a master craftsman at work bet they sound sweet

@BUser-oc1zr Жыл бұрын

very solid and well built

@MrTeff999 2 ай бұрын

Incredible craftsmanship.

@mari2800 2 ай бұрын

Thank you

@bentleygt3716 3 ай бұрын

love the built quality of these Cabinets. VERY NICE. i'm surprised you don't have Spikes on them... you think you don't need them ?

@mari2800 3 ай бұрын

With these I will need experiment. Thank you.

@bentleygt3716 3 ай бұрын

@@mari2800 they will also make them look nicer and more sophisticated. IMO of course.

@gerihifi Ай бұрын

Awesome work, Chaepau! Thus seems massive wood and your side walls are how thick? Overall weight of your speakers? How is your sound expression? Haave heard several Nenuphars and also sound good, voice outstanding, but lacking overall soundstage and very, very picky how you set them up in your room. Thanks a lot for sharing!

@mari2800 Ай бұрын

The walls was 32mm thickness. I didn’t weigh the speakers. The sound didn’t beat my another horn speakers so I sold them.

@Ivy13276 Ай бұрын

@@mari2800may I ask what speakers you are referring to? Are they on any of your videos?

@mari2800 Ай бұрын

For now I’m like more the lii platinum but for some rock or dance is the sb acoustic. If you don’t wanna pay too much the best for price is mark audio.

@christophereverdy4509 7 ай бұрын

Bravo mister !

@zephdog Жыл бұрын

Awesome work!!!!

@mari2800 Жыл бұрын

Thank you

@albertogazzogarra6383 Жыл бұрын

Muy buen trabajo. Felicitaciones.

@mari2800 Жыл бұрын

Mucha gracias.

@MahfuuzhNaufal Жыл бұрын

nice built brother

@marceltvrdik8599 9 ай бұрын

Dobrá práce, kámo..

@Hermann_58 8 ай бұрын

Was für ein großartiges Projekt, in perfekter Ausführung......Toll.....

@mari2800 8 ай бұрын

Danke

@brendanmccarthy4218 Жыл бұрын

Great information which will help me start my project. Thank you. What would did you use? Why did you decide not to use MDF or plywood? Thanks again Brendan

@mari2800 Жыл бұрын

Hello I use oak wood. I love the massive wood and It’s build like music instrument real wood I think is the best for the sound.

@brendanmccarthy4218 Жыл бұрын

@@mari2800 thank you. What thickness did you decide on?

@Amansshed Жыл бұрын

@@mari2800 my mrs loves massive wood as well..

@mari2800 Жыл бұрын

I use 42mm if you use 27mm would be OK.

@mari2800 8 ай бұрын

Hello the music instrument are made of the solid wood so I think is the best way for speakers too.

@tejkarangehlot4741 Ай бұрын

Expensive drivers😮

@michaelsegel8758 4 ай бұрын

HI, I notice that when you build your cabinets (beautiful BTW) you're using what looks to be 2" of solid wood? Then no sound treatment in the cabinet. How does it sound? Does the 45 degree joints w biscuits help in terms of resonance versus typical butt joints? Thx

@mari2800 4 ай бұрын

Hi the thickness is 43mm if you cut in angel 45 degree you get like surface of 60mm so is stronger joint. About the sound I’m impressed how much of base the small drive produce. The treatment I will put later I need try many different options.

@DeletedContent Жыл бұрын

The drivers look good but the foam surround will fall apart over time.

@mari2800 Жыл бұрын

Yes like every drive this type Fostex,Voxativ and others. Will be need change after many years.

@thomasschafer7268 Жыл бұрын

Schon in den 80ern hat man erkannt das Massivholz nicht das gelbe vom Ei ist für lautsprechergehäuse. Jetzt meint jeder einen Klangkörper bauennzu müssen. Trotzdem sind da resonanzfrequenzen. Aber egal!😅😅😅

@piratas217 Жыл бұрын

How much will it cost if I want to purchase your speaker cabinet?

@mari2800 Жыл бұрын

Hello , Only cabinet will cost 1200 EUR.

@emmet7208 Жыл бұрын

Looks great, the only change I would make is to flush mount the driver into the front baffle.

@mari2800 Жыл бұрын

I will try next time (-:

@mattfranklin3622 Жыл бұрын

And you could save yourself a lot of time and money by using good quality ply wood. It is actually superior in audio terms. You then simply veneer to your taste.

@mari2800 Жыл бұрын

Good plywood this tick ness will be more expensive but less work you right.

@janinapalmer8368 Жыл бұрын

What on earth IS this thing ? It looks like a quarter wave horn but it's not ... the mouth of the horn is severely reduced making it behave like a simple ported enclosure with only the wood thickness for the port length ...

@Darkmatterme Жыл бұрын

I think with the original cabinets the hole bottom is open.

@mari2800 Жыл бұрын

Hello the design is bass reflex like on the website of cube audio.One of the options the bottom is open.

@janinapalmer8368 Жыл бұрын

This drive unit would behave and sound heaps better if this cabinet was rearranged to form a transmission line type ...

@mari2800 Жыл бұрын

Hello It should be a bass reflex port like the schema on Cube audio website. And the bottom you can take out too bee like transmission speakers.

@johnnykaldani633 Жыл бұрын

It's always a pleasure to watch a craftsman at work. Great job on your new speakers. I imagine they sound brilliant!😊

@janinapalmer8368 Жыл бұрын

@@mari2800 if you take out the bottom it will be a horn speaker ...

@mari2800 Жыл бұрын

@@janinapalmer8368 I would not call horn. It’s like folded Voight pipe. They measure with the bass reflex very low under 30 hz ,if I take the bottom out the base is starting at 50 Hz but is stronger. If you are interested I can sand you the files of the measures.

@Amansshed Жыл бұрын

transmission lines and ported have high group delay in low frequencies and i can always here it with music.. i've recently added drivers and more amps and the result is cleaner bass and much more accurate.. I'm beginning to think ports and lines are a bit of a gimmick.. more power and more surface diameter beats any fancy design. especially if you are paying £££££ for that fancy design