CUBESIM Thrustmaster TPR Rudder Damper Install

Рет қаралды 9,485

CUBESIM

3 жыл бұрын

www.cubesim.com.cn

Пікірлер: 23

@radoslawmioduszewski6598 Жыл бұрын

your products are great. I recommend to everyone. I never refused to help. I always reply to email. always solve any problem. in one word super seller. I greet you. Radek from Belgium.

@dtotheatothevtothee 2 жыл бұрын

Came in a nice little pastic case. Super easy to install, even without the video...only need to line up a couple holes and snug stuff down. Absolute game changer in the feel of these pedals. Well worth the $ and wait for it to come over from China.

@mxcollin95 Жыл бұрын

NICE! This is exactly what these pedals (as well as all consumer grade sim pedals) are missing for that last notch of realism. Well done man. 🤙

@cubesim Жыл бұрын

thx,We had released a heavy spring kit last week,it performs better than the original one,especially working with the damper kits.

@bradule1980 10 ай бұрын

What a great product gonna order one

@PPGKyle Жыл бұрын

Can you switch between returning to center, and also staying in the same place for helicopters? I fly both so i need the rudder to go back to center for fixed wing, and stay in place for helicopters

@kablammy7 2 жыл бұрын

The unit itself is easy to install and works great - however - the packaging is pretty bad . There is a small box in a larger box and nothing to pad it from flopping around . Also, in the small box there is almost no padding and all the parts clank around against each other . There were some scratch marks on the main damper ... The piston actually punctured completely through the small box corner which seems strange since there is plenty of room for it . It wasn't constrained to be pressing at the corner at all . So that means that probably a force pressed on the outside box that also pressed the inside box to cause the piston to penetrate the inside box . Either that or a huge kinetic force happened . Probably something violently struck the box . I guess it is possible that dropping the box could have caused it because the boxes are VERY thin and weak . So it would not take much to squeeze, rip or tear . The unit is worth the money, however, it seems that they would put better quality and care into the packaging .

@mikkihintikka7273 2 жыл бұрын

how did your damper work?

@kablammy7 2 жыл бұрын

@@mikkihintikka7273 it works fine - no troubles it makes the movement smoother - especially releasing

@aama8250 6 ай бұрын

The piece that attaches to the base broke in less than a week.

@brandy0018 Жыл бұрын

does the damper hold the pedals in any position with maximum damper strength? would be nice for helicopter simulation.

@benwils0n Жыл бұрын

Just got mine today. Even on the lower settings it will hold the pedals in place

@tyenorth Жыл бұрын

Holes did not fit the bolts, two bolts were too short and two were too long. I had to drill out every hole to fit the fittings and the base snapped off after a few hours. The tolerances were not added into the 3d printing dimensions.

@cubesim Жыл бұрын

Sorry for that,We found this problem in a batch of TPR Damper KITS ,too. Some part printed by specific 3D printer will cause the tolerances problem.We had fixed it by modified the drawing.Thank you! And Sorry for the trouble!

@cubesim Жыл бұрын

BTW We had released a heavy spring kit last week,it performs better than the original one,especially working with the damper kits.

@tyenorth Жыл бұрын

@@cubesim i need to send this back to you for a new kit. The base unit with the lip that fits under the large rudder unit base broke (snapped off) immediately. I believe it needs to be redesigned and made larger, as the plastic is too brittle for such a small fitting. Also, if the tolerances are corrected, will the base bolts be long enough? The base is too thick. Also; the the lower bolt for the shock is not aligned properly with the upper bolt position. I will return via the email you sent. Thank you for the quick response! -Tye

@cubesim Жыл бұрын

Thank you .No need send back,take some pics to my colleague by email,let us find the problem.If it is our quality problem,we will arrange the new parts ship you.