Cummins Generator QG 4000 Troubleshooting

Рет қаралды 11,489

2 жыл бұрын

linktr.ee/maddox_mechanic
Me going through the process of diagnosing and explaining the inner workings of this Cummins Onan QG 4000 RV generator.

Пікірлер: 15

@Kevin_Reems 11 ай бұрын

You've got a really good skill not only with the mechanics but with explaining stuff in a way anyone can understand. Keep growing your channel man this is good content!

@aiyogarage 11 ай бұрын

Thanks Kevin!

@whiterabbit2786 2 жыл бұрын

Thanks for posting. I hope the channel grows. I appreciate the diagnostic walkthrough

@aiyogarage 2 жыл бұрын

Thanks White Rabbit. Workin on putting together more content. Stay tuned!

@pnwxplored 7 ай бұрын

Well I cleaned out my carb jets, still no start BUT Im hearing the dip stick is poorly designed, many say drain oil to just above the add and that will fix my problem shutoff issue. The fill level is higher than the oil pressure sensor

@aiyogarage 6 ай бұрын

I’m not familiar with an oil pressure sensor equipped on these units. Only an oil level sensor. Could be an issue with the sensor.

@mindful_guy_420 11 ай бұрын

I have an Onan 5500 I’m struggling with. Would you possibly be able to provide some direction?

@aiyogarage 11 ай бұрын

I could certainly try. Whats goin on with it?

@prohomevideos 9 ай бұрын

I am dealing with repairing some chewed wires from a rat. I am putting it back together but since the wires were chewed off of the brush wires, I cannot figure which wire to connect to which brush block terminals. The wires from the harness are labeled F+ & F-. The online wiring diagram only calls them F1 & F2. I also found the following in the service manual: Connect the F2 lead wire to the outer brush terminal (near bearing) and the F1 lead wire to the inner brush terminal. This does not help me since my wires are F+ & F-. I wish someone could help me translate them. I watched a video from Flight Systems and he was working on a Marquis/Emerald generator and specifically said that the polarity mattered. I just don't know if that is the same with the 4000 micro quiet. Thanks for any help!

@aiyogarage 9 ай бұрын

Hey wish I could help. I plan on buying a generator to keep around to help with questions like this, but I don't currently have access to this generator. I would almost always consider polarity to be important, especially if it is labeled on the wire themselves.

@prohomevideos 9 ай бұрын

@@aiyogarageI agree, there must be a reason they are labeled. I am running into walls wherever I look for an answer. I may just have to experiment with the polarity and hopes it doesn't mess anything up.

@aiyogarage 9 ай бұрын

@@prohomevideos best of luck! Please be careful