remarkable how the pickup position ends up determining most of the sound. It still sounded more P-bass than Music man to me. Would be interested to hear what a Pbass would sound like with the MM pickup in the exact same place as with the MM
@HeyRavil7 ай бұрын
Yeah. There is the video on youtube where a guy placed 5 j pickups in his p-bass with a bunch of switches for each pup, parallel/series, passive/active etc and tried a lot of combinations. And it really highlights what you say here - position is crucial and pup styles are more like for sound nuances
@BennetPlaysBass7 ай бұрын
Pickup position determines tone so much. If im being honest, replacing the pickup for an mm didnt do as much as I thought it would, was kinda disappointed. I love it tho, its uniquely mine.
@VeitLehmann7 ай бұрын
I experienced that from the opposite side: I have an Aria Pro II RSB Standard, with a P pickup about 1 inch closer to the bridge, so halfway between the traditional P and MM positions. Playing it close to the bridge makes it sound pretty StingRay-like, but without the zing for sure. And to make it sound like a traditional P, you can pluck it in front of the pickup. Awesome bass for a Joe Dart sound, especially with the flatwounds I put on it! If you want one: They have gone up in price, but they are still pretty affordable, now around 300-500 bucks (I got mine for 200). And the stock pickup is meh. I replaced it with an AlNiCo one with Fender-like specs (an FGN pickup a friend didn't need anymore), and now it's perfect! And if you want a cheaper alternative for the Joe Dart III: keep an eye open for the Aria TSB Standard - same thing in medium scale!
@martinheath59476 ай бұрын
On a Musicman Stingray, (looking down at it from the playing view) harmonics on the G string, either side of each pole piece magnet (represented |● ●| ) gives you a high G>●●
@HeyRavil6 ай бұрын
@@martinheath5947 didn't know about harmonics there. Makes sense I guess. Like hidden precise engineering musicians don't think much usually. Thanks for sharing
@javvieh6 ай бұрын
For anyone wanting to route it with a drill: use Forstner bits. Dont drill full depth at once; use multiple passes of shallow plunges to keep from binding the bit and losing control
@Cruiseangel723 ай бұрын
Got to give it to him. It works its original, and it's his. Fantastic
@devolution0002 ай бұрын
Very rock and roll mate! I've got my hands on an old Made in Japan Hondo P Bass in red, and think I'll do the shell pink overtop and relic like you have. Thanks for the inspiration!
@BennetPlaysBass2 ай бұрын
Ooo, that sounds dope. Red under there give a nice pop of color shining thru.
@Zuluwhiskey6_5 ай бұрын
Sunburst is my favorite color on guitars......I want to hate this, but it's sooo good. I love the way this build turned out bro. Awesome job and thanks for sharing!
@devolution0003 ай бұрын
That's pretty awesome and i appreciate the "originalness" of it. Nice work :)
@ToddChaddingtonEsq6 ай бұрын
ill bass, and that vulfpeck poster is rad - stay bassin
@BennetPlaysBass6 ай бұрын
Ty my guy :^)
@michaelmiami7 ай бұрын
Hot-rodding basses is a blast! Nice! Thanks for the vid!
@johnreyes195Ай бұрын
Dude you rock. Take it from an 80s rocker bass player from the age of 15 and now 57 now p bass has always been my girlfriend and im always look for that one that will be my wife...i guess thay all are nice job on your bass i approve. Bass player for 40 yrs
@mothsfor6 ай бұрын
looks sick!!! ^_^ im glad to find someone else who also like the shell pink over sunburst finish, turned out great!
@VeitLehmann7 ай бұрын
Nice work! Shell pink with tortoise is one of my favorite combinations, and the sunburst coming through looks especially sick!
@BennetPlaysBass7 ай бұрын
Thanks! Yeah, the sunburst being underneath is a really dope bit I specifically love about this build.
@lucybarney18 ай бұрын
I did a similar thing on a cheap precision stuck a Wilkinson humbucker which is half jazz,half musicman style , put a jazz neck on it and it’s a joy to play
@ChargedCovers8 ай бұрын
Great idea, I wanted to do this to a bass for a while now but I instead built a P-MM configuration bass and it offers a bunch of different tones
@BennetPlaysBass8 ай бұрын
With a musician pickup by the bridge, like where a jazz would tend to go? That's dope.
@phipschi42558 ай бұрын
@@BennetPlaysBass you what would be better? MM pickup where it would normally be and than a reversed P pickup right next to it so you can have two of the best bass sounds in one bass.
@BennetPlaysBass7 ай бұрын
I like that idea, especially the reversed p pickup. Makes sense with the sizes of the strings. Wanted to do that with my yellow PJ but didn't wanna fork up a lot of cash for a custom routed body. Got a premade standard one.
@MilkMaker-ph9dxАй бұрын
Add single coil in bridge pos, very curious what sound u will get
@DanielMejia-tc7bs7 ай бұрын
Nice Job on that bass keep practicing.👍🏽
@l7funk7 ай бұрын
Sounds great very warm.
@eliakuiper42667 ай бұрын
Great bass DIY, not too fussy, the more distressed the better, well done ✅
@BennetPlaysBass7 ай бұрын
Thanks! Glad you enjoy mate
@xiaokang86926 ай бұрын
Holly shit, I made my PM bass 2 weeks ago. Parts Pbass i equipped with musicman type of pickup. My wood cuts are little nicer. I used chisel and for pick-guard mini drill saw.
@moma88356 ай бұрын
this axe looks really sick dude!
@grvyrdsmusic91857 ай бұрын
never seen this done before this is awesome
@hoompaloompaa7 ай бұрын
good job mate.
@nothanks46067 ай бұрын
Hell yeah!
@carpediemarts7058 ай бұрын
I never finished my PM bass. Wiring. Couldn't decide if I wanted both the p and M pickups and cut 2 holes in pick guard or cut out the P and only have one output plug
@BennetPlaysBass7 ай бұрын
Doing the 2 pickups is honestly the way to go if you want to have 1 bass to have many tones. MM in the MM spot, and P in the P spot is the best config imo. Over the years I have amassed many basses so I prefer to have single pickup builds, so each one has their specific sound. That, and I like to blow my extra money on my hobbies haha.
@carpediemarts7057 ай бұрын
@@BennetPlaysBass I've watched the videos. Wiring basses isn't rocket surgery. But I don't have a mm preamp and while I bought another jack, I can't find #2.
@iamLexxKelsey7 ай бұрын
u should make them an sell them with different vibes u got something there 💯
@juangiraldo21826 ай бұрын
Link to the pre-wired electronics please!
@BennetPlaysBass6 ай бұрын
Check out 'sergio barr'
@richsackett34236 ай бұрын
Eek.
@nickdray50727 ай бұрын
How do you expect to get any energy transfer through totally the wrong sized tuners? Not only is the shaft size way too small, you've had to stack the lock nut on top of the original bushings and there is almost no footprint of the tuner body in mechanical contact with the headstock. Big downgrade in performance. If you really wanted to fit those tuners, you need to dowel the original holes and redrill to the correct diameter.
@BennetPlaysBass7 ай бұрын
This is true, the tuners are kinda scuffed. They aren't the proper size, and the old bushings are there to hold in place. If I were to make this bass again, I would do the proper research to get the right sized tuners for the holes. However, in practice, this bass plays fine and holds tune better than the stock squier tuners. Never had any issues with them.
@fleastingraybass3 ай бұрын
Firstly learn how to play, then demonstrate !
@BennetPlaysBass3 ай бұрын
Please teach me !
@daveweed27657 ай бұрын
Yeah. Fender Relics. First time i saw one in a music store i thought it was used. I dont buy vehicles with dents and faded paint. So why would i wanna' buy a new used guitar? I have guitars that i have been playing for thirty years that dont look abused. Road worn my ass or Relic. Buy a new shiny guitar and wear it out youself
@BennetPlaysBass7 ай бұрын
did you even watch my video? lmao that is quite literally what I did. bought a new shiny guitar, and wore it out myself. sorry you seemingly dont like to, but some of us wanna have fun man
@daveweed27657 ай бұрын
@@BennetPlaysBass Yeah but I have fun playing.
@BennetPlaysBass7 ай бұрын
As do I. I also have fun creating something unique and personal to myself, and sharing it with others in the same niche community I am in. A new bass off the shelf just isn't very interesting or fun, as it is exactly the same as anyone else's. Maybe you should try building your own instrument. I highly recommend. It's significantly cheaper and much more fulfilling.
@daveweed27657 ай бұрын
@@BennetPlaysBass I usually play a lot of guitars off the wall before I buy one so they usually sound pretty good to me. Then first thing is grange the strings, adjust the action and set the intonation. But I am a little different than most bass players. I like a high action to stop fret buzz if I get a little more aggressive with my fingers or pick even. I also like thicker guage strings usually 50 to 105. My set up is a Luthier nightmare. And if I take a long shower then try and play it hurts even with callouses. But yeah if something goes wrong with any hardware I replace it myself. All my six strings are non standard technically. Resonance is important to me too so I usually don't mess with the bodies like stickers or custom paint jobs. And the only thing that I do is adjust the truss rod on the neck for dead on level by sight with stings under pressure. My acoustics there are a slight concave bend but nothing on the bridges are adjustable. LOL. Guitars are like assholes and opinions, right. I like a certain sound and a certain feel. Not everyone likes that feel. And technically seems Mal adjusted. But definately perfect for my playing style and my feel.
@flogginga_dead_horse40227 ай бұрын
no one has heard this before lol good lord don't get one then. You know the difference between poly and nitro? poly doesn't change after 30 years ;) you have no clue
@nexus63246 ай бұрын
you really did a dirty job incorrectly, it's poorly done,,, not to mention the pickguard cut like that....and what did you do the digging in the body with? with a bottle corkscrew?? come on... terrible job... next time go to a luthier, spend some money and get a professional job done well
@BennetPlaysBass6 ай бұрын
Some of us like to do it ourselves and have fun! The scuffed dirtiness makes it my own, and I'm proud of my work. It is uniquely mine.