Custom Built High Steer Arms For The One Ton Swap Jeep Cherokee

No video

Custom Built High Steer Arms For The One Ton Swap Jeep Cherokee

Рет қаралды 2,327

5 ай бұрын

Part 9 of the Cherokee Resurrection Series, man does time fly! Today we are fabricating our own high steer arms for the Dana 60 as well as building a drag link and a trac bar. Be sure to watch until the end for some important house keeping/ updates!
We are putting out a video EVERY Wednesday until this Jeep drives out of the shop and onto the trail!
As always be sure to follow us on Instagram for real time updates, if you're watching the series in real time I'm about 2 weeks ahead of each video I post on here, so head over to Instagram for sneak peaks!
/ backcountrybeagles
Thank you all so much for watching, We'll see you out on the trail and we'll see you next time!
- The Backcountry Beagles
Ash, Ron, Bella, Natalie, Lilli

Пікірлер: 41

@johnyhawgleg 5 ай бұрын

Yukon and Motive Gear are the top two on gears just remember to get the full installation kits for the front and rear.

@tylerp9620 5 ай бұрын

Heck yeah man! Let's go Jeep'n. Great job once again! Hope those subs start kicking up to help fund this expensive hobby!

@backcountrybeagles 5 ай бұрын

That's what I'm saying! 😅

@BillyTpower 4 ай бұрын

Hey good job on your fabbing. I’m a machinist for the past 35 years and I’d higher you in my shop no problem.. a small tip though, pardon the pun, is to slow down the speed of your drill press for the hole saw, I know changing the belts sucks but your drills will cut better and last longer. (Do this also for your larger twist drills too.) I hope this helps.

@backcountrybeagles 4 ай бұрын

Appreciate the kind words man🤘🏽next time I’ll give that shot. That was the first time I used that drill press so I’m still new to it. Thanks for the info!

@cpthillbilly 4 ай бұрын

good job on the fab work and the video production!

@backcountrybeagles 4 ай бұрын

Appreciate it!🤘🏽

@lankeyman 5 ай бұрын

I love this series man!

@backcountrybeagles 5 ай бұрын

Glad you’re enjoying it. More to come!

@Anthony_Adventures 5 ай бұрын

Awesome video man. Keep up the good work 😃

@backcountrybeagles 5 ай бұрын

Thank you man!

@whitetrashxj 5 ай бұрын

Use pvc the same Size as the tube u plan on using to eliminate for links and steering etc so that you can minimize waste, looking good tho! Good job

@gregscherf9385 5 ай бұрын

Revolution gear all the way!! I have them in my cherokee. Been in there for over 2yrs. It was a simple install. They are really quite. And they run smooth. They really took care of me when I called to order my gears they talked me through selection of the gears I needed bc I wasn't sure. Super helpful people over there. I really couldn't say enough good stuff about Revolution gear and their customer support

@backcountrybeagles 5 ай бұрын

Thanks for the insight, heavily considering going with them. No problems with Yukon, I just like to try new brands every build.

@gregscherf9385 5 ай бұрын

@@backcountrybeagles I think you will be pleased with the price, performance, and customer service

@Blcfabrication 5 ай бұрын

Would be awesome to run some trails with y’all when you get it done! Love the videos and the fabrication, keep up the good work man!

@backcountrybeagles 5 ай бұрын

Thank you man, beautiful Jeep you got there, will deff hit the trails eventually!

@moejr14 5 ай бұрын

Dude you have a bright future. Start you own small shop and seek parts. I’ll definitely buy and support you. For starters I need a xj swap truss for 2005 super dookie axles f/r and high steer arms😊

@backcountrybeagles 5 ай бұрын

Appreciate the kind words🤘🏽 that’s the goal! Hopefully down the road sooner than later!

@whitetrashxj 5 ай бұрын

Heard lots of bad reviews of Yukons quality gone way down hill, I have always used revolution gear and have had good luck with them for years

@flamezr6870 5 ай бұрын

love the production of these vids bro

@backcountrybeagles 5 ай бұрын

Thank you! Only the best 💪🏽👌🏽

@andidhrami6701 5 ай бұрын

You are a legend ! Love my Xj !!

@backcountrybeagles 5 ай бұрын

Thank you, means a lot! Xj > wranglers 😂

@mylessterrett 5 ай бұрын

Interested in an OX locker as well.

@backcountrybeagles 5 ай бұрын

Should be buying one here soon. I’ll let ya’ll know what I think.

@WyattArnold9986 5 ай бұрын

The new steering setup looks amazing!!

@backcountrybeagles 5 ай бұрын

Thank you, trac bar next week!

@Angels22 5 ай бұрын

A Question Are you thinking of making the Stroker 4.6 Golden Stroker engine? I wonder why it will surely be more fun and you will have more power and torque to move those tires. What do you think :) .

@backcountrybeagles 5 ай бұрын

We will for sure be doing something with the 4.0/an engine swap. 4.6 is on the table but I got some other ideas that would be alittle more interesting 🧐

@Angels22 5 ай бұрын

@@backcountrybeaglesOkay I leave my opinion why I would like to see that 4.0 revive and have more life with that Stroker 4.6 supercharger don't lose it I just leave ideas 😂

@dragop5698 5 ай бұрын

Question on the one inch bolt choice, do you think drilling out the stock tie rod hole to one inch removed a lot of extra meat causing the stock cast piece to be weakened around the drilled hole ? maybe a 3/4" bolt is a good compromise. Love the videos keep up the good work

@backcountrybeagles 5 ай бұрын

I thought about this for AWHILE. Finally came to the conclusion that there is still a lot of meat left around that old tie rod hole after drilling for 1”…..I’m no engineer but I’m sure it will be okay, but time will tell.

@Vitasshop 5 ай бұрын

Lets goo

@backcountrybeagles 5 ай бұрын

👌👌

@Anthony_Adventures 5 ай бұрын

A trail ride with you guys would be super cool as well

@backcountrybeagles 5 ай бұрын

We’ll deff be setting something up, stayed tuned!

@markaphillips14 5 ай бұрын

Your video and audio is really good! Idk if it’s just you running the show but maybe look into marketing your videos on KZfaq to pull in a bigger audience. I’ve watched worse video and worse audio on much bigger channels. Great job!!

@backcountrybeagles 5 ай бұрын

Just a matter of hitting the right crowd! Appreciate the kind words!

@moejr14 5 ай бұрын

What cut oil?

@backcountrybeagles 5 ай бұрын

“Mach blue goo”. Picked it up at Lowe’s. I guess it’s more of a “lubricant” than an oil.