Just an idea on the painting process. I find both yellow and red cover much better with a white base coat first. I also always make it a habit to actually base all of the project in white anyways to act as a bit of a sealer. MDF is a very porous material and absorbs much of the product before coloring it. Your project looks great, however next time you paint on MDF give the white base coat a try. If you don't like it there's nothing lost. You will also see your paint colors are much more vibrant too. Anyways, GREAT Video and nice project

So cool!!

its always a good idea to do a small test cut on new materials. often times it can save time and material. great job!

I find that if you mirror the bottom layer in lightburn, you can engrave your logo at the same time your cutting everything out. Saves a little bit of time.

Pretty damn awesome! Great inspiration, thank you!

I love her!!! Beautiful work🙌🏽

Awesome!

Keep up the Amazing Work!

That’s amazing. I’m hoping to get a co2 laser soon

Great job!

Luv it....

Great video ❤

Let’s go!!!

Good job keep it up❤

Your work is awesome.Next time You could add more depth to the sign by adding more layers for the cap and eyeglasses.that will made the sign 3D instead of flat.

u earned a new subscriber awesome work

Where are you gtting your spray paints, the yellow tone is perfect.

Great coverage on MDF with that paint/primer! What brand did you use?

Looks GREAT!!!!! What software did you use to do your graphics tracing?

Really nice ! How did you made the file processing, from image to cutting files ?

I have the exact Thunder 35/100w laser like you have and just start using it about 2 weeks ago. Are all the pieces from MDF cut? Also, the MDF that you use is so good that it looks so smooth when you paint on it. Where did you buy your MDF from? Also, what is the setting that you use to cut the MDF?

what air assist do you have cause that power laser should have cut through that quite easy. Also its wise to cut a small square first to dial in your cut power and speed.also where some parts cut through and others dont can sometimes be down to the quality of the wood(mainly plywood) and down to the levelness of your bed. gonna follow you though as i like supporting small creators.

Great job! Where can I buy one?

Lovely! What's the measurement on this piece?

looks so good..:) I feel its a little too thick, Maybe cut out of 1/8" material?

Are there issues with using copy right images???

How much did that cost you in spray paint?

You are so cute ❤❤❤❤

Simpsons are the best

You should be aware that you cannot sell items which violate the copyright of others. Disney owns the copyright to The Simpsons, and that includes images of Lisa Simpson. A woman selling items based on the copyrighted works of a country music singer was recently fined $500,000 for doing so, even though the total gross revenue of her Etsy store was less than $15,000. That said, you did a nice job of making a custom sign from Lisa's image.

For every mm thickness of would you use 10 watts of power, 3mm =30 watts, 4mm 40 watts etc. If you cut to fast with your speed it'll not cut through so you'll need to have a play at lowering your speed. I have a 60 watt laser and cut a lot of 3mm either wood or acrylic I use a spped of 12 and give a little more power of 35 watts.

Rip to the front of that vehicle. Open garage with a draft out straight to the vehicle. Overspray is bad.

Could you get that machine to cut a semi-shallow well into the back board the same shape as lisa so she just slots in all snug? Would ensure lisa is in position every time you make one and you wouldn't risk messing up the back board paint job with glue cause you could just glue inside of the well. Would love to play with one of these machines.