Great idea but and I love that paint, but I wish you'd handled that broken door pillar and buffed the red light up some.
@bttfdmc19848 жыл бұрын
Nice restore but one slight problem the star on the hood is wrong. A single point should be facing the windshield not the grill of the car.
@D34ADCH7 жыл бұрын
Just found this channel and I'm not disappointed! Obscure and unique and addictive.
@TaxedtoXXX6 жыл бұрын
dirt and grime effects would look good this car. giving it that backwoods, country, dirt road look.
@LeCafeRacer7 жыл бұрын
You should look into molding casting new windshields. You could just Bondo the windshield to a desired finish and that would be your mold pattern. Just pour some silicone and you'll have a mold that you can shoot a variety of translucent resins into.
@imaboygenius5 жыл бұрын
I have both the police and fire versions from my childhood. Love what you did with yours.
@TruthIsTheNewHate845 жыл бұрын
I wonder is little red LEDs would work as a light dome if it's missing. You might even be able to make it light up.
@TheKingRacer0078 жыл бұрын
theses silver sharpie pencils works amazingly good, i use it everytime for my customs
@stevenhennager51645 жыл бұрын
You inspire me to fix many of my toys, my beat-up farm truck was transformed into a muddy, roadworthy truck again,for example
@sovietrusalkas2ndchannel9438 жыл бұрын
I did notice there was a crack that separated the top of the car from the front driver side pillar. It's noticeable in the video but it doesn't seem like it's a problem since the car isn't going to be for playing, just show. But if you noticed that, did you want to try and fix that or anything or leave it as is?
@quilope6 жыл бұрын
I like how the windshield is all cracked and roughed-up. It looks like it's been on some gnarly car chase. Nice work, dude.
@revzillo7 жыл бұрын
Just a question .... is the star on the hood the wrong way around ? .....
@minigungaming59157 жыл бұрын
Jerry Bailey Probablu
@abnpthfdr29346 жыл бұрын
It is upside down, but, then again, the Army never used the Ford Galaxie as a staff car so it's a fantasy custom altogether. Good job, though.
@DerekMoreyDRock8 жыл бұрын
I like the way this one turned out. Nice work.
@GrumpyIan8 жыл бұрын
i like the cracks in the window, i personally would have made the car look like its been used to go with the cracks.
@ryanhodges71016 жыл бұрын
That’s a really neat car and you did a great job customizing it. I believe it’s a 1965 Galaxie judging by the grille and taillights. I have a full size 1966 Galaxie 500 and it’s got 200,000 miles on it and still running fine. I drove her everyday for about 10 years and she never let me down.
@barrydemay3348 Жыл бұрын
I’m 57, my parents started buying me those Matchbox toy cars since like ‘67, ‘68 when I was kindergarten. My distant memory keeps telling me that there were a couple of my favorites would still be somewhere in my old house for decades. Isn’t it crazy! This memory just can’t go away along with time. Here to share with u guys, I’ll The Ùrrr is the internet internet eee😂😂❤❤ internet e ew was seeds add as as B as
@manofthehour68566 жыл бұрын
Another very useful and well-presented instructional video! I wish I thought of the silver Sharpie before buying a metallic paint pen. If you haven't already, an instructional on how to replace cracked / broken glazing using hard clear packaging plastic and heating it to form windows would be much appreciated. Thanks!
@KevinCofDE8 жыл бұрын
Sharpie works for all details.
@bradleyabsalom20487 жыл бұрын
Hi Kevin A Creedon my name is bradley absalom and i totally agree with your statement because if the door handle is metal then you can use a silver sharpie to make it look like metal
@ericjhubbell4 жыл бұрын
This would look great with a few jeeps chasing the A-Team van. Nice job as always.
@tompulford25697 жыл бұрын
idk why but I've always liked matchbox cars over hotwheels. perhaps it's being british but they always look a bit more detailed
@angelob23837 жыл бұрын
Tom Pulford I believe Hot Wheels are intended to be more unrealistic and weird. So I definitley have to agree on you that Matchbox are more realistic
@mercoid6 жыл бұрын
Tom Pulford ...I grew up in the U.S. in the 70’s. There were always 2 schools..., Matchbox kids and Hot Wheels kids. I was in the minority as a Matchbox kid. I just liked the look and feel better.
@mr.sonnytruth80216 жыл бұрын
mercoid So was i loved matchbox cars think he could've done a way better job, did nothing to the interior not even the driver, wheels nothing. Why do so many customizers shyt on matchbox cars?
@rogersmith98086 жыл бұрын
Agreed with the exception of the crude and usually undersized wheels/tires. The horribly oversized and white "trailer hitches" don't help either. As many others have said, I too think that Hot Wheels were more about custom rods and fantasy. 👍
@KountFive8 жыл бұрын
Good idea for a transformation, I was digging the big star for a while. The cracked windscreens are definitely a pain, you did a good job there.
@evilkidd1747 жыл бұрын
I know this comment is a bit late but you could do this car as the patrol car from The Andy Griffith Show.
@thaddeusjameson5007 жыл бұрын
have a lot of vintage matchbox! and in good shape! WOW!
@troyrgrant8 жыл бұрын
Thanks aggain for the props. Love the vintage redos!!
@turowat7 жыл бұрын
I had this car when I was a kid!!
@SunbeamsSting7 жыл бұрын
Great custom car. Job well done. Thanks for the info.
@hernanrestauracarrosmartin75077 жыл бұрын
Excelente restauración!!! Desde Argentina Bs As gracias totales
@graffitikid92447 жыл бұрын
Looks really cool, well done!
@MatchboxGarage5 жыл бұрын
Very cool custom. I thought you might have gone with a standard restoration but happy you went custom
@FlamingTightyWhiteis7 жыл бұрын
these videos are cool as hell. I may try and do some stuff with the random toy cars I have. beautiful hand work man
@vegawilson92786 жыл бұрын
Love the siren on the top and I love that it looks cartoony
@ltr43006 жыл бұрын
I had that car as a kid...very young. First thing I did was wonder "What does the red button do?" and pushed it through. I wouldn't be surprised if that's what happened there...
@pmm41777 жыл бұрын
have you ever thought about making silicone molds of the windshield or whatever part you need and casting them in acrylic?
@Hrothgar986 жыл бұрын
Beautiful job. Gorgeous. But I think the star on the hood is upside-down.
@PolizeiPaul6 жыл бұрын
Nice MP car. They did make older MP cars like that but I think they only used the old 2 door Mercedes and none had a light on top unfortunatly.
@electricwheels4117 жыл бұрын
That is really kool and I have just started out restoring some of my Matchbox and Hot Wheel cars :-)
@crossbow12036 жыл бұрын
A little dab of JBL epoxy would take care of the windshield post crack that you left. It is really unbelievable how strong that stuff really is!
@goddlee47068 жыл бұрын
Amazing work! I kinda wished you made it a dark green color, but the color you used was perfect enough.
@dennismason37405 жыл бұрын
@baremetalHW - nice - thanks for detailing the chrome bits. Simple transformation from one "authori-tay" vehicle to another. That model was actually used by the U.S. Army. How to fix a windshield crack? Here is a method I like but nobody else does because it takes a while. Wash the clear plastic (whatever hue) in soap and water and dry. Carefully tape (painter's tape) right next to the edges of the crack - on the outside of the crack so that glue won't go anywhere but the crack. Since I don't have a "studio" or "workshop" I use Krazyglue (Dollar Tree) thwipp right from one end of the crack to the other and let harden for a minute. Remove tape and sand and polish. The crack won't be invisible but structurally it is solid. Not that it matters. I haven't seen my Corgi collection since 1968 however this method of window crack repair is a universal fix. Aloha.
@DiecasttoysplusChannel8 жыл бұрын
great job, would be nice if Matchbox and Hotwheels would have more Army staff cars
@goddlee47068 жыл бұрын
+Diecast Toys Plus true true!
@minebiggut15106 жыл бұрын
Just a tip, when you do decals, it helps to apply some gloss clear coat to the spot the decals are going to be placed. This will prevent the decals from "silvering", which just means that the clear part around the color becomes visible.
@GIsForGene5 жыл бұрын
Omg I used to have one of the police style ones, when I was so so young. It broke my heart when it broke. I was playing with it and a kid stepped on it to be mean. Thanks for the memories, I miss that car lol
@georgeshelton62812 жыл бұрын
You should've replaced the windshield; since we've seen 2 cracks, not just no side windshields. I realized that this Matchbox toy car is now, the MP car is what it looks like.
@kenhorne56505 жыл бұрын
Have very steady hands to so good.
@Gappasaurus5 жыл бұрын
do you ever revisit cars from older eps like these? your newer techniques could prob work well on the windshield and light dome here. would also be an interesting vid to show “modern methods” in action 😃
@rugmanal7 жыл бұрын
Looks good.
@thesanfordmethod190520 күн бұрын
So great ! :D
@Gtlikewolf7 жыл бұрын
Best Videos for relaxing:) you got some skills. Keep up the good work !
@mihaiat3ka1865 жыл бұрын
Just an idea you can try, it worked on actual glass for me but never tried on plastic, if the crack is all the way through the other side, I used auto clear coat applied on the crack and with a suction cup or anything you can, create a bit of vacuum on the opposite side to make it leak in the crack, let dry and polish, takes a bit of practice but if done right the crack should completely vanish or very close, not sure how better to explain this without showing but I think you got the idea,please let me know if or when you tried it and what results you got. Tip. Try and practice on a flat piece first before going on curved windows. Also I think acrylic lacquer will work better than water based as it'll bond better with the plastic. (For clear pieces, as for tinted plastic is hard to match the shade and not sure the clear will blend in with your piece)
@lcoracing94997 жыл бұрын
you can also use your exacto knife for detailing. dip the end of the knife in desired paint after that just detail where you want to do it at
@BlackthorneBuilds6 жыл бұрын
I know on full size auto glass, clear resin is injected into the cracks and chips to fill them in and hide the crack. I wonder if there's a thin glue or resin that could fill and hide the cracks on the windshield in this car.
@gunner6786 жыл бұрын
Nice job...i think i would paint the interior andcthe driver...but i get its nice to retain original features also!
@mitchellpawlina5865 жыл бұрын
The crack on the driver side pillar, I’ve seen other restores fix it with crazy glue and baking powder.And I was wondering why you didn’t paint the driver, and put some detail in the interior. Other than that the car Came out nice. I watch your channel all the time, keep up the good work.
@horaciodiecast6 жыл бұрын
Wow great restoration
@bradgotch6 жыл бұрын
I had a 65 Galaxie daily driver big car was a tank.
@class_37575 жыл бұрын
I was thinking that you were gonna restore the light but still looks great! @~@
@ThaineWayne8 жыл бұрын
Awesome!
@yannickstevens40218 жыл бұрын
Also, I love how perfectly placed the 24 is as soon as you drop it. Epic skill or luck, who knows :V
@baremetalHW8 жыл бұрын
definitely epic luck.. hell it surprised me too!
@tomraptor30928 жыл бұрын
+baremetalHW mad mad max should be a jet treat 4.0
@yannickstevens40218 жыл бұрын
I feel like you missed an opportunity for an epic Mad Max model... have exhaust or something running from the engine up through the roof, like one big exhaust pipe. Could have used the method you showed previously for "action effects" to have smoke pouring out of it. I get that the intact red dome is important and all, but still.
@baremetalHW8 жыл бұрын
I have tons of these cars.. so opertunity is not necessarily missed... will see how that would work..
@paxhumana20157 жыл бұрын
Hey, +baremetalHW, here are some good ideas for custom vehicles if you want to use some ideas. I would like for you to either use the Matchbox 1978 Dodge Monaco or 1977 Hot Wheels police car (I think that it is built upon a Plymouth Fury), and modify either one of them to look more like the 1978 Dodge Monaco or 1977 Plymouth Fury and then add one of those 1990-1998 Chevrolet Caprice/Caprice Classic/Impala/Impala SS light bars from one of those Maisto/Tonka police cars (and, if you can somehow, figure out a way to get the doors to open and close as well as to make the headlights, side lights, and light bar lights be installed in the vehicle) and to get rid of the old light bar on the Dodge Monaco and the lame light bar and fix the top of the Plymouth Fury. How are those for some good ideas for a police car?
@CHaas-bn3xi7 жыл бұрын
absolutely cool
@Johnwalter10448 жыл бұрын
Nice work! You could have painted the tan interior piece in dark grey or some other dark color.
@veganunicorn4246 жыл бұрын
i love your videos so much
@user-vh8xi2mz5v8 жыл бұрын
I love your channel.
@WayneSpider8 жыл бұрын
Very nice resto .
@diecast_MikeEspo5 жыл бұрын
Nice work , cool video , Mike espo .....
@RodolfoPolanco8 жыл бұрын
applying for bright finish, gray was primary, but to shine I use? Thanks, greetings from Mexico
@jammygamer89618 жыл бұрын
You did an excellent job on putting the stickers on i wish hot wheels would allow you make you own custom hot wheels so i could get a hot wheel and make my own design and have in delivered for like 4 pounds like in Lego digital designer
@squareyoyoer6405 жыл бұрын
Have that same one!
@moist17006 жыл бұрын
dang those old matchbox car are tanks
@BJG-ii2ek5 жыл бұрын
Your awesome dude I already subscribed you
@JohnD6406 жыл бұрын
Re cracks in glass. the old Johnson's Klear used to be good but I heard they changed it. Also, White glue dries clear. Superglue is good for real glass but don't know what it would do to plastic. It's thin enough to run into cracks. Best test it first...
@MODELMIND727 жыл бұрын
SWEET!
@user-lf7qu5vh4n6 жыл бұрын
خايب
@erik5488 жыл бұрын
2 tips, first look up "micro set" its an acid that you brush on the decals after they set up, and for most water slide decals it eats the film away allowing the ink to settle down onto the model eliminating that shiny boarder left behind and its like $3 second, sharpie makes paint markers in silver that i have found gives better coverage, especially on light colors, then the regular sharpie. and you can also trim the felt tip to a sharper point for better control also i know ive jumped into a few of your how to vids and offered suggestions, i hope you don't take it as me correcting you or anything. the modeling world is divided and each group comes up with its own tips and tricks, and unfortunately alot of those dont trickle over to the other modeling groups, thats why i followed you, the hot glue casting trick blew my mind because i had never heard of it before, and none of my model railroading friends had heard of it. but even though i dont care about modifying hotwheels, i love some of your modeling tricks, and im offering my incite from my 15 years of a different end of modeling
@baremetalHW8 жыл бұрын
oh no... I appreciate the tips.... it's such a vast hobby that I can't pretend to know a tenth of it... I watch a ton of modelers and wargamers paint their stuff and then transition a lot of it over to HW... some of it like the hot glue casting I came up with... but I am sure someone else has done it before me... as for the micro set... I'm embarrassed to say that I have a bunch of it and could not find it for this video... so i just left it out so i could get the video out..the sharpie paint markers is a great idea.. I have some and will give that a try.. please feel free to offer up tips any time!! and thanks for watching!
@TheTeufelhunden685 жыл бұрын
If you notice, most setting solutions smell like vinegar, as that's what they are. I use a dilute solution of white vinegar that the wife has on hand for cleaning.
@codgersworkshop46476 жыл бұрын
how do you reassemble them? Do you glue them?
@fernandojose25996 жыл бұрын
I think that its possible to use an LED part to substitute the dome
@Kimiskustomgarage6 жыл бұрын
I have the fire version of mercury matchbox with two guys but its on very rough shape. What could i put two the light hole on the top?
@vtwintora5 жыл бұрын
The left top front pillar is cracked
@reneberthold3346 жыл бұрын
Which diameter and height have the light on the top? What you can try is to use a red 5 or 3 mm LED as a replacement for the original one.
@kengrigg4 жыл бұрын
why cant you use a sand blaster, with an organic compound in it like walnuts shells for stripping ?
@JoaoPaulo-eo2cj7 жыл бұрын
nice diecast car
@ScottDunlap420bd8 жыл бұрын
love it.
@caldera997 жыл бұрын
what kind of paint remover did you usw (brand)???
@MrBoss-od3td6 жыл бұрын
I love this video it good
@Quasihamster7 жыл бұрын
That dome rather looked like someone stepped on the car.
@Hobby_Hooligan7 жыл бұрын
I have this one in white sweet!!
@Bigbadsmallcars8 жыл бұрын
beutiful man I love it
@aarondraper18186 жыл бұрын
I wonder if some thin super glue would have filled in the cracks in the windshield ?? But then again would this make the plastic go foggy?
@Donleecartoons5 жыл бұрын
Dipping in acrylic floor finish (used to be sold as "Future" in the US) helps hide some cracks and scuffs in clear plastic.
@dapati12576 жыл бұрын
Nice video
@littlebastard53144 жыл бұрын
I served in one of those
@rhys85668 жыл бұрын
please make a video on how to take apart hot wheels
@hmhsbritannic77657 жыл бұрын
dancefreaky just drill out the rivets with a drill
@SAV1080p5 жыл бұрын
Here's an idea for a drinking game, take a shot Everytime he says *testers matte clear coaaaat*
@carstrainsandcrossings86392 жыл бұрын
Army vehicles are actually numbered
@saltyyy9648 жыл бұрын
good work
@_Koesuma.6 жыл бұрын
awesome
@Infidelmedic7 жыл бұрын
Try using Future floor polish for clear parts, after a bit of a polish, it is a clear acrylic that will hide small scratches. I'm a static scale modeler, we use it all the time to do clear parts, as well as a gloss overcoat. It works well under waterslide decals to prevent that silver look that you can get with water, as an under and overcoat for the decal prevents a reflective layer from forming. www.swannysmodels.com/TheCompleteFuture.html
@snakesdiecast71308 жыл бұрын
Amazing!!! You ever want to sell that Military car I'll buy it !!!!!
@jessehodge82837 жыл бұрын
VERY COOL
@buffalophil36305 жыл бұрын
You should have painted the seats and maybe the guy a little but awesome turn out
@Donleecartoons5 жыл бұрын
I've noticed that ... few of the customizers and none of the restorers on these cast metal cars ever want to do anything with interior detail plastic beyond clean it. It's true that the kind of plastic used doesn't take paint well; maybe that has something to do with it.
@dim99888 жыл бұрын
The left pillar is broken! Be careful!
@TheDave56197 жыл бұрын
If I'm not mistaken that's a ford Galaxy ?
@chuuska19726 жыл бұрын
i used to have the fire chief car many many moons ago... :~(