I've been using computers for 40 years... I have never seen tutorials this good. This guy should make tutorials about making tutorials

Just bought the full license this morning. Really impressive what you have been able to achieve. You have made so many people's lives easier. Congrats!

I bought Lightburn last night and just looking at your videos for the first time, top marks on what I've seen so far but just one point, the version you use to demonstrate Is way behind what I have now and there are soooo many new things on my Lightburn that you don't cover. Time to get recording again 😁😁

Thank you for all the effort you put into the program. It is a blessing for laser users.

My man throwing down some serious knowledge in this video, nice work!

Thank you for a very well thought out presentation. This was very informative and helpful, again thank you.

Just bought my laser and lightburn! So excited to start! thanks for this video.. excellent!

Thanks watched 3 or so videos. I’m a bit computer dumb for better terms and just got light burn for my laser. Very helpful information and def subscribed to your Chanel. Best in-depth info I’ve found so far.

Thanks for a very thorough explanation of all the modes.

This software looks awesome. I am a glowforge user which is super easy to use, but it does not give a lot of control over the laser functions. I am thinking of getting a larger more powerful laser, and this software really makes it tempting.

Very helpful videos. Don’t stop making these

Very good and educational video. Explained all the short comings I experienced 1st time engraving images.

thanks so much for the videos, they have helped so much. I'm really liking the software.

Great video, very well explained. Thx.

I did notice the outside edge been being deeper. Now I know why. Good Tip. I'll turn on Over Scan.

How do I find out what my beam width is? I’m using the Ortur Laser Master 2.

any tips on optimizing photos for greyscale? Or does the software do that for you when importing photos in their raw format?

Amazing. Waiting for the release.

I Really like the Results with Cross Hatch. I see the option when I created the file from within Light Burn, however if I open a .png I did not see that option. Is that because of the file extension? Or am I doing something wrong?

What kind of laser did you use for making this great picture ?

Very very good and clear video. Thank you!

Definitely building my confidence towards buying a laser!

I have latest version of Lightburn paid subscription and not sure why I don't have the scan option in the cut window. Hard to work out settings and other things when every video I watch has different setting options.

What's ideal setting for cutting thin plastic sticky paper without burning it? Like cutting a sticker without going through the bottom wax paper. 2 separate layers.

great video ! . I have a questiom about the latest version of Lightburn (0.9.19) has different cut modes like ' Line', offset fill , and fill+line. did not see any documentation on it even in the underlying help docs. any explanation on it please ? . compared to the video we see like 'Cut' etc .

What material would you recommend for someone trying to learn this , would MDF give decent results ? , it certainly would be the most economical to learn with

I followed along with you and with a few bumps along the way finally got to where you were measuring out the size of your wood.......couldn't go any further. I just don't know what I was doing wrong. I would put in my measurements at the top, lock the lock, assign that line to T2 then the arrow/heart would turn blue. I am at my wits end. I have a Sculpfun S30. Trying to use Lightburn. :(

how do you put cut or scan , as mine says line, fill or line and fill in cuts

Is there a setting/button that allows the laser to emit its light so I can see exactly where the laser is positioned

Please how I know the laser header is damage because it Gating small light and thanks

I have A RUIDA 644xg how do I program the over scan or how do I turn on the overscan setting

Should you adjust your Dpi and have it auto set your Interval?

Is there an updated version of this video? I'm sure the software has changed a lot in 5 years

I have a ruida and i get the burns on my images on the ends ! It doesn’t have overscanning. What do you mean that it has it in hardware ? How would you suggest i don’t get the over burning on every edge :0

May i ask what settiings are used to perform a wood cut out. Basically a name within a circle but i dont want the laser to cut out the name i want the wood to say the name.

Really liking the software. Can you tell my why all the sudden svg's are getting the traversals are powered on? Did a couple test engravings and they went fine but then the last couple svg's I imported started getting cuts where the traversal lines are. Very odd. I closed the program and deleted my preferences file and then started the program again so it was back to default but still cutting the traversal lines. I hope that makes sense. I couldn't find anything in your docs or faq.

Please I need help..why my laser engrave traversal lines? Thank you 🙏🏻

Can you make a video on power through and perforation mode

Just got my laser and practicing using light burn. For some reason I only have options of: Line, Fill, Line + Fill. You have options of cut, scan, etc. My power/speed is the same for line as it is for fill. Any suggestions on what the difference is and how I can cut out?

Hey I need help lightburn isn't staying connected. It says there was a problem sending data to the laser. The machine my be busy or paused. I made sure the drivers are connected, right clicked device to reset the connected, even power cycle everything still not working. I'm using the ortur laser master 2

Hi this is my first engraver, and I’ve never used a program like Lightburn. I set my laser up today and tried to run a test burn on a piece of wood. The laser went through all the motions, but it did not make any marks on the wood. Which settings should I check to see if it’s a user error or a lens/laser error?

Was wondering if you might know what settings to use to cut mirrored acrylic on the tool d1 ten watt laser.

I do I change the size of my pattern? I been trying to figure it out I’m a little confuse about it. Please help lmbobvs.

Need help new 100w 26x39 ruida China made engraver when I start a cut no matter what the image is text shape the laser engraver a single line help please

I don't have cut and scan I have fill and line. Why are fill and line my only options in "mode"?

Hello I cant get my comgrowZ! to do anything it powers up but when i send any work to the laser it says that it is pause or no data can go throw please how do i reset or unpause it so data can go throw

Hi, pls help explain. Overscanning - this feature is available in the setting of light burn for use of Grbl - and it is hardware setting if used Ruida am I understand this correct? how do I find out on my Ruida to do this? Thansk

jump to 23:25 (of this 24 min video) if you want to hear about actual cut settings..... the rest of this "tut" is about setting raster lines.

Hello good afternoon, how I can calibrate my ortur laser master 2 with the program ?, does not cut me perfect circles

how are you bringing up the preview window?

I keep getting this message "cut might be out of bounds- continue anyway? How to fix it need some help

Witam, Dlaczego program przestaje grawerować np. w połowie pracy?. Grafika wektorowa wszystkie linie połączone ze sobą

These vids are good, but now outdated. I'd love it if you were to update them to current capabilities and ability labels.

File > export > two option SVG & LVRN. DXF OPTION NOT AVAILABLE. HOW

Hi sir. On my lightburn on menu shape properties for image. Its not show the brignest and contrast sir. Whats wrong???

Is there an update terminology for the settings for engraving vs cuttin.

Ligth burn can be use with neje lasers?

Why does mine say line and not cut? Can I change that, do I need to change that? I'm trying to cut but my laser is not cutting! im cutting while engraving. So, mine is set at line for the cut and then fill for the engraving.

can i get a pic of the fox to test with?

does lightburn have a basiair line tool?

Where can I find the settings to engrave aluminum? I've tried everything I can think of and I've watch your videos but nothing seems to work.... I have a CREALITY LASER FALCON ENGRAVER-10W. Btw your videos is amazing

dxf file how to save...

I wish he would have said what the hot keys he used

Can someone help me for some reason now when I change the passes it will indicate it change however it will only make one pass

how do Iget light burn from my computor to my lazer printer

Great videos But that mouse click this REALLY sucks to listen to.

I have a poto with white background, how do I get rid of the background

Nice tutorilas but it seems lightburn has changed a lot There are many things in the interface that have changed so for a beginner it gets quite confusing- That scan thing I did not find it anywhere- and there were other settings that do not appear and other that are new that I don't see in the videos- How old are these? Now that youtube has decided to hide the date in which the video have being published is quite difficult to know how old the videos are

hmmm, I would have to wonder, take an image and place it horizontally, greyscale dither it. Now take that same image and rotate it 90 degrees, move the once burned image in machine and rotate it 90 degrees also, match them up in alignment, would burning it that way create a better image due to the power dithered cross hatching? /EDIT oh, the software can do that, sort of with the scan angles... interesting. Will have to try both and see the difference, if any.

every time i do a engraving they all ways come out upside down and mirrored i can hit the button to flap it

Preview window - how much years you need to scratch head, before you SAVE POSITION of that window?? :))

HOLY CHRIST please remake these videos.

I know you said the beam is a circle. So what’s stopping it from becoming a square? Lol

Would you please another video but go a bit slower?

you should adjust the volume of your voice up and the volume of the clicks down. Have to turn it up to hear you then get deafened by the clicks

how do i get the cross hatch feature?

uuuuf the latest version looks much different.... Lots of videos dont make much sense anymore,....... I just want to create a cut line from a vector... and then the only thing I find in videos is guys saying like yeah and then you can create a cut line.... But its not shown how lol

Great videos but your keyboard and mouse clicks make me want to throw my computer out a window lmao

beans

Your tutorials are very hard for beginners, which I thought is what tutorials are for. You keep using the hot keys and moving so quick that I have no idea what your talking about.

I think you have flipped you vector and raster terms ( kzfaq.info/get/bejne/pN-Sm7ylz6vQgYk.html )

You call this video - cut setting. I want cut setting for 3 minutes, nothing else!!!! Why I need to watch all the 20 minutes for it?

Ukázka, jak to nemá v tutoriálech být. Klik , klik z klávesnice... použití klávesových zkratek a uživatel je ztracený.👺

slooooowwww down. you move your curser so fast i don't see what you clicking

Watched this entire video hoping to get information on cutting and best settings and the only thing he talked about is shading. 👎🏻

Is it so necessary to chew banal stuff like "lines per mm"?? I'm tired how idioticly stupid your "tutorials" - you have nothing to say?!?!!?! Just show how to import pic and burn it!! This is ALL we need from you!

I find your needless 😢constant mousing and clicking around the screen very annoying.