Cutting and Programming Automotive Keys With DEFU 368A and Ancel DP500 (08 Ram 3500)

Рет қаралды 64,474

Күн бұрын

this is a tutorial / review of the DEFU 368A and Ancel DP500. I bought these on amazon and I am liking them so far! The links for them are below if you want the see them on amazon.
Key Cutter- amzn.to/3KrFs0S
Programmer- amzn.to/3up7p1J
replacement keys- amzn.to/3shSEv1
Get the best business credit card from chase here! Earn 100,000 bonus points with the Ink Business Preferred® card or up to $1,000 bonus cash back with the Ink Business Premier® card, Ink Business Unlimited® card or Ink Business Cash® card. I can be rewarded too, learn more.
www.referyourchasecard.com/21...
------Contents of this video--------------
0:00 intro
0:32 assembly
1:26 setup
2:17 cutting keys
6:40 Programming

Пікірлер: 54

@joshuamungasia4529 2 жыл бұрын

this is great,kindly do more videos

@hattakey4397 2 жыл бұрын

video good brother thank you for shaing

@mnjackson5772 Ай бұрын

You are supposed to replace the clamp tightening nuts with the plastic knobs.

@jamesdove5647 2 жыл бұрын

Thank you

@megodahab Жыл бұрын

thanks alot

@Cybernetic263 9 ай бұрын

Great 👍

@timstanford3443 Жыл бұрын

Take the nuts off and install your wing nuts, works good. Maybe you can show how to set depth on cutter and guide?

@Locksmith4you 2 жыл бұрын

Nice

@MajorPayne550E 2 жыл бұрын

Great vid. Thank you!

@DiyCommerce 2 жыл бұрын

You're welcome!

@GodZilla-tv6gr 2 жыл бұрын

Hi thanks for this video very helpful, question about your Ancel device I have the X7 version and I'm trying to program keys to my ford but i don't see ford listed,does this mean ANCEL doesn't support ford? For programming keys

@DiyCommerce 2 жыл бұрын

Just make sure you download the updates and you should be able to use it with a Ford

@PAX_Access_Control 5 ай бұрын

You're supposed to remove the nuts before attaching the knob.

@edwinbarahona303 2 жыл бұрын

👍🏽👍🏽👍🏽

@CHIBA280CRV Жыл бұрын

Awesome, by any chance does the tablet work for motorcycle keys as well ? Thanks for sharing 👍🏼👍🏼👍🏼👍🏼👍🏼

@DiyCommerce Жыл бұрын

I am not sure about that. I do not have any to test it on.

@curtisalleyne3710 2 ай бұрын

You might as well buy a silca Bravo machine personally

@guypilar3158 2 жыл бұрын

When you buy the new key is there a immobilizer chip already?

@emlikas3973 2 жыл бұрын

Yes, most if not all car keys on amazon come with chips

@Hugolopez732 2 жыл бұрын

Instead of this you should buy the Chinese vertical cutting machine, you’ll save a whole lot of time cutting keys than this machine and that machine is around $110, and keep this one just for high security key, that’s what I did when I was starting to cut keys, this takes to much time to cut a regular key.

@cornchips007 2 жыл бұрын

Link? This machine looks so painfully slow

@Hugolopez732 2 жыл бұрын

@@cornchips007 110V 100W Duplicating Machine Horizontal Copy Machine Cutter Cut Engrave Machine

@Hugolopez732 2 жыл бұрын

@@cornchips007 the machine went up since when I got it, the first comment is the one I started with, but I’d recommend you go with the second one I post because it have a cleaning wheel and more fine tune adjusting if you’re going with these cheaper machines. 110V Laser 2AS Horizontal Cutting Copy Duplicating Machine DIY Cutter Tool

@user-oq6nn8fg5c Жыл бұрын

@@Hugolopez732 where did you purchase this at?

@Hugolopez732 Жыл бұрын

@@user-oq6nn8fg5c I got it on eBay.

@pazienza00 4 ай бұрын

Hi, just a quick question, which size or angle cutter you use for this type of key? Thanks for any answer

@DiyCommerce 4 ай бұрын

Unfortunately I don't remember. Its the one it came with if that helps

@bearsgarage272 6 ай бұрын

Hope i can prgram my key fob for 09 ram this easily, i just got the X7

@DiyCommerce 6 ай бұрын

Should be able to just fine.

@BeyondTheGrave0 Жыл бұрын

How much was the dp500. Can't find it on your Amazon link. Seems like it doesn't exist.

@DiyCommerce Жыл бұрын

They seem to go on and off of Amazon for some reason. Here's a link to one on eBay it's the same price as the one I had purchased. www.ebay.com/itm/115056864013?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Namue0ftRIG&sssrc=2349624&ssuid=LBX02x1dRMK&var=&widget_ver=artemis&media=COPY

@Autodoc91 Жыл бұрын

What are you do for all keys lost situation??

@DiyCommerce Жыл бұрын

Can't do that with this unit

@catrellg 2 жыл бұрын

Does it need a yearly membership like the topdon?

@DiyCommerce 2 жыл бұрын

It does not.

@ricardowhyte6100 2 жыл бұрын

hey, remove the nuts and use the black handles only.... i had that trouble too until i figured it out

@DiyCommerce 2 жыл бұрын

Awesome thanks for the great tip!

@ricardowhyte6100 2 жыл бұрын

Your welcome, get spare belts

@mikealkarout9555 3 ай бұрын

Gotta take those nuts off the jaws and use the wing nuts the nuts are just there for transport.

@jocelynarias5326 8 ай бұрын

How much cutting mach3

@lito3481 9 ай бұрын

did these bits come with machine?

@DiyCommerce 9 ай бұрын

Yes they did

@gebremedndessie9747 Жыл бұрын

How much this cutting machine

@DiyCommerce Жыл бұрын

It's usually about 180 usd

@jocelynarias5326 8 ай бұрын

How much cutting mqchine

@DiyCommerce 8 ай бұрын

Used to be about 150 to 200

@user-dl2ki3oi2c 2 жыл бұрын

Сколько стоит аппарат

@alejandrovaldezsanchez 2 жыл бұрын

La máquina no es la indicada para ese tipo de llave, supongo que no eres cerrajero, deberías dejar de hacer este tipo de cosas que solo dan una idea errónea a la gente

@andresaguilar2235 Жыл бұрын

Tienes toda la razón amigo, yo tengo la duda con estas maquinas chinas acerca de su calidad, sera conveniente comprarla para un local de copias de llaves??