Cutting C10 doors to fit a 1973-1975 K5 Square body Blazer

Рет қаралды 2,864

Жыл бұрын

Nobody makes reproduction doors for the 1973-75 squarebody K5 Blazer. I take measurements are cross my fingers as I chop a perfectly good C10 door to fit this full convertible.
This project is almost ready for paint.

Пікірлер: 15

@johnnybravo6047 10 ай бұрын

Thanks for the video. I’m currently restoring a ‘74. Had to buy after market doors. Your video will help! 👍🏻

@79xs1100 7 ай бұрын

Wicked video. Very helpful. I’m currently doing a full top conversion on my 76 K5 and having all these measurements will save me a ton of guess work. Cheers

@CrankAddict 7 ай бұрын

check out my latest for more info.

@tytis2060 10 ай бұрын

You the Man Great Job

@bigblue73blazer Жыл бұрын

Bought different doors for my 73 today now to chop them

@blackjackranch4587 8 ай бұрын

Crank Addict, I have a ‘75 I’m working on.. I replaced rockers, floors, rear quarters, fenders. The huge mistake I made was allowing the whole firewall to ‘lean’ toward the rear without knowing such that my top would no longer fit. I’ve had to cut back through the rockers and pull the firewall toward the front with a come-a-long. That being said, I’m worried about it moving back over time with the weight of the doors when the top is off… thoughts about the structure holding over time?

@CrankAddict 8 ай бұрын

Avoid rubber body mounts and go polyurethane. Solid mounts would be best if this is going to be toy. The truck gets its strength from the frame. The better you can join the body to the frame, the more solid it will be. I made the same mistake but was able to correct it in time. Next time I will solid mount the body to the frame before any cutting.

@John2250Nt Жыл бұрын

Can you make a video on how you do the door glass and run channels ?

@CrankAddict Жыл бұрын

It will be coming along in time. Give me another month or two.

@John2250Nt Жыл бұрын

@@CrankAddict how’d you make out with the door glass and run channels ?

@John2250Nt 2 ай бұрын

@@CrankAddict hey just curious how you did the door glass, my windows come out of the channel every time I roll them down

@CrankAddict 2 ай бұрын

@@John2250Nt Make sure your rear lower support has all the washers to make it stiff. If it is missing the washers then the bracket will flex and the window will pop out of channel. Happened to me, too.

@John2250Nt 2 ай бұрын

@@CrankAddict okay awesome I’ll take a look at that