Cutting Script Font on a Scroll Saw

No video

Cutting Script Font on a Scroll Saw

Рет қаралды 25,921

Oak&Feather Decor

Күн бұрын

Watch Oak&Feather cut a script font while explaining interior and exterior cuts, as well as how to control your work.

Пікірлер: 39

@bernardmcmahon7434 2 ай бұрын

Thank you for the information about the vibration. I did not know the blade could cause that by becoming loose, I assumed it was the workpiece that was causing it. I will reset my blade before I tackle the next piece.

@Mark-yb1sp 2 жыл бұрын

Thank you! I’m 61 and started scrolling for a hobby. Your tutorial was excellent. 👍🏻

@aprilr4274 2 жыл бұрын

*This is my second WEN tool and they are both great **MyBest.Tools** I needed to do some trim work around the house and needed a scroll saw for the intricate work. No complaints so far.*

@mrk-ph8pu 2 жыл бұрын

Thanks for the video. It's good to see a tutorial with real time scrolling. When I started, I always wanted to go too fast . I think because every other tutorial is sped up many times.

@davidmurphy1637 3 жыл бұрын

Thanks for all the great tips! Saved me weeks of frustration. I was having that exact issue with the vibration and leaving the inside cuts until last.

@bigronshobbies8209 3 жыл бұрын

That turned out great, I really need the practice but it's a lot of fun. Thanks enjoyed.

@OakAndFeatherDecor 3 жыл бұрын

Practice practice practice! Just takes time!

@bunnymanalo8549 Жыл бұрын

Nice scroll saw.

@mitchrand9466 Жыл бұрын

You’re a wood surgeon!!❤

@tayloralvidrez4342 9 ай бұрын

My reaction when you pulled out the "baby"; Holy Shit! I didn't know that level of detail was possible. Does this work on most types of wood? (Obviously not partical type) hard vs soft woods? Im impressed, def earned my sub.

@yemenibritishculturalforum1744 3 жыл бұрын

Perfect job. Thanks for sharing & explanation

@icelim4003 3 жыл бұрын

May I know more about what kind of blade you using? Is it modified geometry blade? Can flat blade do the same cutting job as well? I am new to scroll saw and your video helps me a lot. Thank you.

@markdmaker3173 2 жыл бұрын

Awesome lesson. Thanks!

@dawnkingston7530 3 жыл бұрын

So the first layer is painters tape? Or some other sticky paper? Is this so you can spray adhesive on the pattern so it doesn't get on your board? Thank you.

@OakAndFeatherDecor 3 жыл бұрын

Yes! That's exactly why. I use painters tape or contact paper. Then you can use glue or spray glue to stick your pattern on top, and you aren't getting glue all over your board! Saves time sanding, and you don't want to be sanding aggressively when you have small detailed cuts.

@bertasantos9836 2 жыл бұрын

I see you don’t answer no one comments 😢, I hope your see my comment , I have the same as you but mine jumó a lot when I cut , I don’t know why I’m scared ti cut my finger

@daphnelozano7142 3 жыл бұрын

What wood do you use ? I’ve been trying to cut out small shapes and everything chips.

@0711dogs 3 жыл бұрын

What size is your font? Thanks for the very informative video!

@JenBeauty13 2 жыл бұрын

Can you show us how to fix the word if it cracks

@jgrayblesser 2 жыл бұрын

What kind of blade are you using? To make a corner like that... is it a spiral blade?

@OakAndFeatherDecor 2 жыл бұрын

It’s a normal blade! A #5 MGT by Pegas

@morgansims3521 3 жыл бұрын

Thanks for sharing! Are you able/willing to share where you source your mdf from and what type you'd recommend?

@OakAndFeatherDecor 2 жыл бұрын

I get mine from a lumber mill or just Home Depot!!

@creativomaugeri 3 жыл бұрын

🤩🤩🤩Very nice 👏👏👏

@johnrodriguez7638 3 жыл бұрын

What make and model is your scroll saw?

@sandyevans2406 3 жыл бұрын

I have the same scroll saw, it is a DeWalt 788.

@cgarcia2713 3 жыл бұрын

What font do you use ?

@creamersruraldesign2455 3 жыл бұрын

What kind of blade are you using?

@OakAndFeatherDecor 3 жыл бұрын

I am using the Pegas MGT #5 here. It’s my go to blade lately!

@praphakaran2012 3 жыл бұрын

nice

@fume5671 2 жыл бұрын

What size of blade do you recommend ?

@OakAndFeatherDecor 2 жыл бұрын

For 1/2” I use a #5! If you check out my other videos I have some good ones on blades specifically!

@lstrubbe67 3 жыл бұрын

What kind of a saw are u using

@OakAndFeatherDecor 2 жыл бұрын

It’s a DeWALT dw787

@OakAndFeatherDecor 2 жыл бұрын

788*

@yvonneschimmel453 3 жыл бұрын

Your fingers are dangerously too close to the blades. Made me nervous

@OakAndFeatherDecor 3 жыл бұрын

The nature of this tool requires your hands to get close. Thankfully the blades are very small and flexible so are unlikely to injure you much if you happen to slip! But understanding the saw really prevents that from ever happening!

@yvonneschimmel453 3 жыл бұрын

@@OakAndFeatherDecor I read that the scroll saw is the safest so far to use. I just started to learn the craft. I do it to help me deal with my brain tumor. It helps me try to focus and forget my demise.