Repair DAMAGED Tilt Bucket for 30T CAT Excavator

Repair DAMAGED Tilt Bucket for 30T CAT Excavator | Welding & Arc Gouging

Рет қаралды 585,938

3 жыл бұрын

This video is a job we did to repair a damaged tilt bucket for a 30 Tonne Caterpillar 330 Excavator. This bucket got caught on the excavator track and the moldboard and cutting edge have been badly bent. First we carbon air arc gouge the cutting edge and bent moldboard off the bucket using our Lincoln Electric DC-400 welder. We then fit, align and tack on the new moldboard before lots of welding. After the welding is done we fit and bolt the cutting edge on to the new moldboard to complete the repair.
In this video we are using:
- Lincoln Electric DC-400 Welder
- Geiger Pneumatic Needle Scaler
- WIA Weldmatic 500i Welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: bit.ly/ceesubscribe
Join our Patreon community: / cuttingedgeengineering
To see more follow us on online here:
Instagram / cutting_edge_engineering
Facebook / cuttingedgeengineering...
Official CEE Merch shop: www.ceeshop.com.au
Check out our AMAZON store and explore our favourite finds that we use in the workshop:
www.amazon.com/shop/cuttinged...
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: www.epidemicsound.com/referra...
#australianmachinist #machineshop #machinist

Пікірлер: 1 900

@CuttingEdgeEngineering 3 жыл бұрын

Hey viewers thanks for watching todays video from our workshop! We haven't shown a bucket job before so hope you enjoyed it. I even got rid of the neck beard for you all this week 😎👍 Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳 Follow us online here: Instagram instagram.com/cutting_edge_engineering Facebook facebook.com/cuttingedgeengineeringaustralia/ Official CEE Merch shop: www.ceeshop.com.au

@neile9435 3 жыл бұрын

My girlfriend is complaining she likes the rough looking you.!!!!

@CuttingEdgeEngineering 3 жыл бұрын

@tony king it'll be back in a few weeks 🤣

@brycejeannotte7699 3 жыл бұрын

Almost didn't recognise you!

@PiazzaWoodWorks 3 жыл бұрын

The only reason to have a face that smooth is if you went to court or you got married! 😂😂

@gregclemson1733 3 жыл бұрын

Shave and a hair cut makes you feel good knocked ten years off ya ..

@heru_ur6017 3 жыл бұрын

The new apprentice looks a lot like Kurtis, even sounds like him. Does seem to do a good job.

@GazSaichania 3 жыл бұрын

LOL xd

@rodrod383 3 жыл бұрын

that is Carl

@blackindian9554 3 жыл бұрын

Mans looking like he's in his early 20s with that shave

@CuttingEdgeEngineering 3 жыл бұрын

Almost had to get the whipper snipper out to shave the neck beard it was getting out of control 🤣

@MrMgrPL 3 жыл бұрын

Next week in suit 😎

@gavinhenderson5862 3 жыл бұрын

Get the neck beard back.

@NicolaP269 3 жыл бұрын

@@CuttingEdgeEngineering Nice looking Kurtis, ten years younger :-)

@robbybachmann332 3 жыл бұрын

@@CuttingEdgeEngineering probably get asked for ID again if you go to the bar haha.....

@12345NoNamesLeft 3 жыл бұрын

0:52 I love it when you show us the little clip of what the repair is of. Keep that up.

@j81851 2 жыл бұрын

Me too that shows knowledge of training and presentation skills, It's just a bucket off something until we see WHAT it's off of and what that piece of equipment does! Keep them coming!

@InservioLetum Жыл бұрын

My favourite part as well. Huge Chunk of Metal A and Huge Chunk of Metal B, just doesn't quite have the gravitas of "this cylinder carries the entire weight of the dozer's blade"

@stillwater62 3 жыл бұрын

To have a face that young, and have the depth of knowledge inside that head, is an enigma. Kurtis is wise beyond his years. Really enjoy the videos, and thank you Karen for taking the time to make them.

@Laura-wc5xt 3 жыл бұрын

Good Heavens Kurtis, I thought your Grandson was doing this , you look so young with out the scruff.....Cheers, Paul

@CuttingEdgeEngineering 3 жыл бұрын

My younger brother Carl? 🤣

@RalfyCustoms 3 жыл бұрын

I'm sure it is Carl 👍😄

@markfryer9880 3 жыл бұрын

Yeah, that’s got to be Carl!

@colinsmith5060 3 жыл бұрын

You must have gotten the dollar shave club sponsorship

@williamhoward7121 3 жыл бұрын

I shave at least once a year whether I need it or not!

@jameskelly883 3 жыл бұрын

I Love how y'all show the bloopers at the end and he has no filter when he messes up then I get to hear a cute laugh from the lady holding the camera. It show we are still human and mess up lol please don't change anything about y'alls self for anyone and I hope y'all have a great day and God Bless both of y'all

@Hraethigaldur 3 жыл бұрын

The internet is mostly just crap. But just the fact that I can sit here at home on a Friday night and watch you do an excellent job on basically the other side of the globe is absolutely amazing! I never cease to be fascinated by seeing people with expert knowledge do their jobs. For you it's everyday, for me it's magic! Thank you for choosing to share your everyday life with us viewers! And that's a happy dog!

@0verboosted 3 жыл бұрын

This is literally, cutting edge engineering

@jimsvideos7201 3 жыл бұрын

I figured it out! Karl is Kurtis' little brother! He's the one in this video 😁

@CuttingEdgeEngineering 3 жыл бұрын

🤣 shit Jim's on to us 🍻

@jimsvideos7201 3 жыл бұрын

@@CuttingEdgeEngineering Hey the shirt I got from you showed up, it looks good and I look forward to wearing it in my little machine shop so I know who to blame for blowing a dimension 😅

@joandar1 3 жыл бұрын

@@jimsvideos7201 and Kurt/is do your dimensions in Bannanas as well as Metric, average the dimensions and that will be correct, lol. Have not done one this big CEE, however it is all fun and takes time. Cheers to all, John, Australia.

@Demicron 3 жыл бұрын

That's whose beer that was a few videos ago.

@hw5950 3 жыл бұрын

Shit who's the baby face apprentice.???????

@Vinson351 3 жыл бұрын

2:00am in the states! Been waiting for a new video all week!

@CuttingEdgeEngineering 3 жыл бұрын

Super fan right here 😎👊💥

@Laura-wc5xt 3 жыл бұрын

3:10 here on the east coast

@Vinson351 3 жыл бұрын

@@Laura-wc5xt I’m in the Midwest. More specifically Missouri.

@Demicron 3 жыл бұрын

420am and here we go. Time to go to work.

@tabajaralabs 3 жыл бұрын

06:10a here in Brazil

@401sttfw9 3 жыл бұрын

Abom79 would have made this video in 5 long winded parts. It so nice to have Kurtis explain what he’s going to do, and do it. No boring chatter. Oh, nice clean cut shave. You look about 10 years younger.

@Jirekianu 3 жыл бұрын

"I'm outta wire!" *sudden tone that slowly fades off* For a second I thought it was just Curtis cussing up a storm and one long beep was the easiest way to deal with it.

@jimmurphy6095 3 жыл бұрын

That's what I thought, and then I remembered that this is the same guy who considers Fuck fuck fuck fuck fuckk fuckkk a complete sentence... :)

@jacobszymczak9323 3 жыл бұрын

Torque spec for cutting edge bolts? *Torque until the Cutting Edge is flat again*

@jessehall8168 3 жыл бұрын

Lmao I've literally done exactly that. Mini Cat loader (901 I think). Mole board was bent about the same as the one in this vid, but worn down thin so it could be straightened by bolting in a new egde lol

@aaronpreston47 3 жыл бұрын

Man it’s 40 ugga duggas on a 1” impact then get a 6” snipe and give it a half turn. I’ve just never seen washers put on them.

@davidmcdonough7827 2 жыл бұрын

@@aaronpreston47 damn straight, 1inch gun for truck tires, many ugga/duggas and then the breakover and 6ft cheater bar and probably more of one push and done. Cat 926M wheel loader with a big ass bucket to load the auto dump feedbox at the feedyard.

@davidmcdonough7827 2 жыл бұрын

Shoot forgot, no washers.

@lwfeagan 3 жыл бұрын

Customer states: “GPS controlled machine, accuracy is very important.” Also: “I ran over bucket with machine.”

@jessehall8168 3 жыл бұрын

Lol typical. Maybe more like "new boy smacked the tracks with the bucket" tho I dunno.

@cinderswolfhound6874 3 жыл бұрын

Yea that is modern technology machine knew where to dig but not where its feet were

@jbonegw 2 жыл бұрын

🤣🤣🤣

@markmuldoon7044 3 жыл бұрын

Machine operators: "I'm surgical with this thing, could probably shave a man's face" *Also machine operators: "give that boulder another slap with the bucket it might move"

@DudleyToolwright 3 жыл бұрын

Large scale industrial fit ups are always interesting to watch. I was wondering how you were going to align the material and it never occurred to me that you could just weld on a wedge point align and go. Educational and entertaining as always.

@stevencorley2352 3 жыл бұрын

Hi, Karen! Started watching and thought, "New camera? Different lighting? Something has changed!" Then it hit me, Kurtis is clean shaven. Gotta say, he cleans up pretty good. Another great video (especially the camera work).

@paulhammond7489 3 жыл бұрын

I see that Homeless left his helicopter parked in the background again :)

@CuttingEdgeEngineering 3 жыл бұрын

He's such a show off 😂

@lw4609 3 жыл бұрын

Such a beautiful view of the skyline down under y’all have a great day I enjoyed the video

@GKsGS400 3 жыл бұрын

They use it to go get smoko lunch

@johnvitro5908 3 жыл бұрын

Cool repair keep videos coming

@cinderswolfhound6874 3 жыл бұрын

That chopper belongs to kurtis but he is too shy to admit it.

@conorlavery4762 3 жыл бұрын

I'm sure its common practice in the industry but using a scrap of steel and a drift/wedge to close the gap between the bucket floor and new plate was super simple I had imagined chains and a come along winch....... that's why your the CEO....... very impressive 👏 👌

@misterJR67 3 жыл бұрын

Yeah, me too! 😂 L shaped bracket and wedge is genius in it’s simplicity 👍🏻

@kalebbooher8092 3 жыл бұрын

Mr. IC Weld himself would be proud, good work as always Kurtis

@phranklyn 3 жыл бұрын

Was wondering when you were going to get the hydraulic jack out to straight the bucket before welding. The wedge trick is so much better.

@terryfromsouthcarolina4601 3 жыл бұрын

Oh to have young knees again! Beautiful job! It amazes me how far MIG welding has advanced. We would have never used MIG but stick welded it instead. Of course the machines have advanced leaps and bounds too. Sure beats an iron wheeled Hobart torpedo motor generator cranking 400v DC at 48 volts. I like your breathing machine too. That smoke is full of bad nasties! Cheers! Terry from South Carolina USA

@cullenmiller8170 2 жыл бұрын

I never had the luxury of getting to work in a shop when working on buckets. I was either on the barge or sitting in a mud puddle. We ran a 15 yard hard digging bucket and a 27 yard clean up bucket on the dredge. It was always fun building a tent around the bucket to get out of the weather. No wire feed either. Running stringers for days on end repairing cracks or welding adapters on. Now I'm all crippled up I just get to watch you do it. Great channel and great work.

@halfinchholes88 3 жыл бұрын

Carbon arc gouging is a blast! When I worked as a railcar mechanic, there wasn't a bolt too big or too tight it couldn't loosen. Eventually I got one for my home hobby shop. Just be careful not to stick your leg with it while 'white hot'. It doesn't hurt too bad, and rarely bleeds. Love the video.

@InservioLetum Жыл бұрын

Now imagining you with a smouldering stump sticking out of singed jeans, with a facial expression of "C'est la vie" Thanks for the giggles :D

@richardmercer8915 3 жыл бұрын

Great job! I worked in structural steel fab years ago. Compliments to the camera lady and to the safety officer(Homeless). You guys keep one clean shop. Really enjoy your videos from Australia.

@TheBiggerrich 3 жыл бұрын

That was a hell of a lot of “Ooga Dooga’s” on that Impact! Kurtis says torqued to spec! That Arc Gouger is one scary bit of kit too Wanted to also say “hey Karen, how are ya?” Loved that you left welding audio over the speed welding after the wire change 👍🏼

@IronHideWildfire 3 жыл бұрын

Thank you for adding the voltage and amperage to the video! I was wondering the whole time how my Miller 211 on max would compare, about 40% more power and way more wire feed. Class act production

@theessexhunter1305 3 жыл бұрын

Thought I had gone back in time as you looked so young with a shave and shine... Nice repair

@CuttingEdgeEngineering 3 жыл бұрын

Nah can't go back in time til I get the flux capacitor fixed on the cnc milling machine

@tabajaralabs 3 жыл бұрын

@@CuttingEdgeEngineering will it reverse mill? :D

@Tofufiche 3 жыл бұрын

@@tabajaralabs Nah, it will just mill at 88mph

@D989501L 3 жыл бұрын

Morning Carl 😉 I can see that the dog ran straight past the wife to look at the 19 year old stranger who had a shave? 😃. Regards to you three As always Richard 🇬🇧

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate! Yeah safety dog likes Carl the best 🤣

@D989501L 3 жыл бұрын

@@CuttingEdgeEngineering Hi Their,yes strange thing, my wife's dog preferres me to, maybe it because I'm the one that gives him sneaky biscuits when she's not looking 😇🤫

@jerryglen986 3 жыл бұрын

Kurtis, your wife and you live in a beautiful Country.

@djarcforceable 3 жыл бұрын

Greetings! Just wanted to offer a little advice here when running into “arc blow” problems on metal that is magnetized. First off, I’m not going to lie and pretend like I have tons of experience with arc blow due to magnetized steel. I’m just a welder that’s kind of a nerd and likes to read up on all things welding. Next time you run into this, try running 2 ground clamps; One as close as possible to each end of the weld joint. This, in theory, will disrupt the magnetic field that is present and will allow the weld to deposit normally or closer to normal anyway. It’s worth a shot. Hope this helps. Keep up the good work. Love the content.

@IJK75 3 жыл бұрын

Kimi Räikkönen is so versatile! 😀 Greetings from Finland!

@CuttingEdgeEngineering 3 жыл бұрын

Just call me the iceman 😂👍

@maxcactus7 3 жыл бұрын

Your videos and your work are extremely satisfying to watch! It's enlightening to see how much effort and expertise goes into fixing these pieces of heavy equipment. Your pride in your work shows itself in the finished product. For the next Q&A can you tell us why you use the carbon rods for cutting vs. an oxy acetylene torch? Absolutely love your channel. Keep em coming!

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate thanks for watching and the great comment. Will probably do a bonus video on that some time! Cheers

@craigsbully 2 жыл бұрын

Oxy is so much more expensive and the rods are cheep and fast. not to mention he has to move a lot less tools.

@tomelder6028 2 жыл бұрын

With all the detail you put in not surprised that you don't have jobs come back

@koen8973 3 жыл бұрын

Congrats on the new intern. He sounds just like you!

@terrminatoragain461 3 жыл бұрын

I guess that's no longer on your " BUCKET " list ! 😂

@CuttingEdgeEngineering 3 жыл бұрын

Dad joke for the win 🤣👍

@spoot 3 жыл бұрын

Hope the missus gets a respirator while filming. Keep up the awesome work!

@cdwlights 3 жыл бұрын

Don’t you mean fart extractor?

@ThePilotPenguin1 Жыл бұрын

as someone who has had to battles bent wide buckets a lot of the time, this brings me a lot of joy

@bradlusk4531 3 жыл бұрын

The dog is hilarious……..

@fabianfarina2208 3 жыл бұрын

3:00 am here in Paraguay Good morning!!!

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate good morning over there

@buyamerican3191 3 жыл бұрын

Way to go Kurtis, Love your videos! Give "Homey" some love from the states! Oh and your videographer needs a raise!

@CuttingEdgeEngineering 3 жыл бұрын

Cheers mate! She agrees and will probably give herself one as she does the pays haha

@pyro323 3 жыл бұрын

I'll say it for ya Kurtis, "That ain't goin' no where!" Here in the states whenever you secure/weld something you gotta say that phrase. Nice work by the way. 👍🇺🇲

@chaoticmuscles 3 жыл бұрын

Same law applies here in aus for tying shit onto the ute

@bart99gt Жыл бұрын

Proper way to check tie downs is to pull on them a few times after tightening, and declaring "that isn't going anywhere! " 😁

@kevinwieland1510 3 жыл бұрын

Holy Moly!!!! The razor blades finally arrived after being out of stock since the beginning of the pandemic!!! LOL Looking good Kurtis.

@GeorgeD1 3 жыл бұрын

"Customer's brought it in with a bit of a problem". In other words - It's munted.

@rupert5390 3 жыл бұрын

In the top 1% engineering content on utube (don’t want to upset the others) it just amazes me that you are that highly skilled both at welding and fitting and turning - these are two seperate expertises (made that word up) you rarely see blokes going from one to he other with his level of expertise - as always I,m in awe - nd as I keep saying your work is fairdinkum not some utube drivel for the sake of the vid - very proud Of you Aussie no nonsense get the stuff done way - also the video shooting and editing is top shelf. Cheers.

@Dustin_the_wind 10 ай бұрын

I really appreciate the work, effort, and personal touches that you three contribute to this series, very much a fan. I'm grateful that I don't hear that background trap beat in your other videos, that I am here; I'd rather hear Kurtis run the descaler, or homey with his squeak toy, honestly. Thank you three for sharing.

@cornbobrimlove7892 3 жыл бұрын

Shave looks good brother. You're not nearly as ugly as I thought after all......

@CuttingEdgeEngineering 3 жыл бұрын

Thank you...I think 😂

@brettymike 3 жыл бұрын

Never ugly with those expressive impressive big green gecko eyes! :-)

@alittlebirdie8085 3 жыл бұрын

Kurtis is a handsome man. And I'm sure Karen agrees.

@brettymike 3 жыл бұрын

@@alittlebirdie8085 He is a beautiful man and a champion engineer, and his drive & optimism is second to none.

@aga5897 3 жыл бұрын

Please explain something about the metal being magnetised and having to lay it flat. Never heard of this before.

@willyd.217 3 жыл бұрын

I'm assuming he's dealing with arc blow that is causing difficulty welding in the vertical position

@the_zule 3 жыл бұрын

You live in such a beautiful part of the world. You have plenty to be proud of young sir! Such a hard working, industrious young couple! Homeless is a great dog. Cheers from Cranbrook, BC. Canada

@CuttingEdgeEngineering 3 жыл бұрын

Thank you mate!

@jessebob325 3 жыл бұрын

24:14 Was a lovely transition from the end of the project to a beautiful sunset. Kurtis looks so young when clean shaven 😄! A nicely done production. Thanks to the three of you. 👍🏻🍻

@phalcon23 3 жыл бұрын

1am in Alberta Canada, working Ambulance night shift! Thanks for the post!

@CuttingEdgeEngineering 3 жыл бұрын

Legend take care mate hope it's a good shift for you

@phalcon23 3 жыл бұрын

@@CuttingEdgeEngineering 5 more hours to go, no calls so far so fingers crossed. One of the joys of working rural. Low call volume. So I often use my down time (after base duties and other tasks that need to get done) watching youtube videos like yours. Used to work in a fabrication shop as as their head electrician. We took cabs and chassis, and made welding decks, services bodies, fire trucks etc. Often had some odd and ends to do so I taught myself how to do some basic fabrication work. Though I'd let the certified tight guys do their thing when it needed to look pretty. Thanks for the videos though!

@praetorxian 3 жыл бұрын

@@phalcon23 Working the Ambo night shift myself in Ontario, Canada. Also used to work trades prior (automotive, fabrication work, etc.) Cheers.

@MoMonde 3 жыл бұрын

The work is “perfect” as well as the production value of the video. Y’all make a good team ! Of course the Inspector is the glue! Lol!

@CuttingEdgeEngineering 3 жыл бұрын

Hey Bob thanks mate!

@7891ph 3 жыл бұрын

Thank you for responding to my question about the gas mix ratios you're using from your last video!!! Greatly appreciated; it's always interesting to see if best practices are the same around the world, and appears to be the case. You folks do a lot more heavy welding than I have any experience at thought. That's one of the reasons I like your stuff; you never know what trick might come in handy down the road!! :-):-):-):-)

@jamesbuttleman3130 2 жыл бұрын

Well,the "black beauty" stole the show with his tug o war with the forklift. L M A O. Very interesting project,I enjoyed it and your explanation of what plan you have to get er done. Showing the different carbon rods and how they're used was interesting,you make it look easy,but the extra videos after prove it isn't always easy. Well done camera tech,good shots of some exceptional welding. Another job well done by the "Terrific Trio", keep up the great videos,I do enjoy them,thanks for going through all the work to share them. Cheers,stay safe and well.

@humancattoy7767 3 жыл бұрын

That is a beautiful chunk of steel. This is a real treat, seeing the process of putting a bucket back to rights.

@CuttingEdgeEngineering 3 жыл бұрын

Glad you enjoyed it mate will be sure to do some other heavy metal repair vids in the future 😎👍

@johnhunter4972 3 жыл бұрын

Didn't understand the bit about magnetism. Never heard of that before!

@polyesterdreamboat 3 жыл бұрын

I would also like to understand that part

@lolzlarkin3059 3 жыл бұрын

Welding is an electrical process. Magnetism fucks up your arc. Makes the electrons wander all over the place.

@polyesterdreamboat 3 жыл бұрын

@@lolzlarkin3059 why does laying down the piece help?

@jonka1 3 жыл бұрын

@@polyesterdreamboat Takes gravity out of the equation.

@MartinTeerly 3 жыл бұрын

I drive trucks for a living but I have engeeniring background. I always watch at least 1 of your videos before bed time. I thoroughly enjoy it. I also miss the smell of the shop. You're doing grate job. All the best and keep doing what you doing 👍🏻

@gatekeeper65 3 жыл бұрын

Just no bullshit repairs of the highest quality. Your dog is as good as they get. Take care folks.

@ctdieselnut 2 жыл бұрын

24:07 - the always hard to please safety inspector, doing his job lol Good job on the bucket. Your welds always look good and strong to me.

@thegodemperorofmankind7yea704 3 жыл бұрын

“Generally our operators here abuse them” lol

@ctdieselnut 3 жыл бұрын

Even though these machines are state of the art, allow one man to do the work of a 100, and be in an a/c cab listening to the radio while doing it, by the end of the day sometimes you just start to resent it. Some operators are great to the equipment, some take there anger out on it. A rock wont budge? Smash the bucket into it sideways 40x lol

@shaggyego 3 жыл бұрын

You know its absolutely f***Ed when an excavator owner goes from "well make it work" to "we need to fix it" lol

@gonget 3 жыл бұрын

You know most times the operator isn’t the owner. Operator was probably on the phone instead of paying attention while f-ing up a multi thousand dollar tilt bucket. You see these clowns every day abusing these machines that they could never afford themselves.

@shaggyego 3 жыл бұрын

@@gonget without a doubt, but tbh I've seen plenty of owners abuse their machines just as much lol and let's be honest, "I bent the bucket on the track" is a greenhorn mistake, and touch wood something I've never done in 30 years of working

@dirtfarmer7472 3 жыл бұрын

@@shaggyego greenhorn mistake, very greenhorn, I wouldn’t want to admit it

@Greggspies 3 жыл бұрын

You now have full wardrobe and make up department I'm impressed,

@renniejames9666 3 жыл бұрын

Hi Kurtis and Mrs Kurtis. Love your work. Great to see the capability of a suitably skilled and motivated individual as compared to the lumbering might of corporations. 👍. What I’d love to see next is your cooking show. Cheers.

@mr.nugget4594 3 жыл бұрын

Cool trick with the welded angle and the wedge to align the parts 😉 Greetings from Germany and have a nice weekend!

@leso204 2 жыл бұрын

Common ship building practice to aline platework & decking

@risfutile 2 жыл бұрын

Weißt du zufällig, wie diese gouging rods (bei 5:58), mit denen er um die Muttern schneidet, auf deutsch heißen? Gibts die hier überhaupt?

@mr.nugget4594 2 жыл бұрын

@@risfutile Kohlenstoffschweißelektroden 😉

@whitelined2 3 жыл бұрын

Precision fork lift skills! Another excellent video.

@larrymasterspowerbuildingc4477 3 жыл бұрын

Awesome camerawork! The man is cut cleaner and leaner than skeeter's peter! Clean shave, clean work, outstanding job, Shave or not, I enjoyed learning another process. Thanks to you and the Mrs.!

@barrymurray8264 2 жыл бұрын

CEE have great videos !!! The engineering is spot-on and videos are informative and the wrap-ups are funny as hell ! The 3 of you make this 68 yr old man happy, please don’t stop. Thank you

@priden4656 3 жыл бұрын

Прикольная собака и всегда в отличном настроении) И ещё, сам не люблю бриться, но ходить бритым люблю, и тебе, Куртис это идёт))) И как всегда - Good Job!

@atVVV1 3 жыл бұрын

Just finished welding for the day, showered, laid down and 💥, new video.

@CuttingEdgeEngineering 3 жыл бұрын

Good timing enjoy the vid

@mehanic72 3 жыл бұрын

So today, Curtis exchanged his locksmith machine for a job outdoors. Good)) I like it!

@louielou1382 3 жыл бұрын

Best part of my week is upload day, Great job repairing and filming!

@CuttingEdgeEngineering 3 жыл бұрын

Cheers mate thanks for supporting the vids

@dermozart80 3 жыл бұрын

Yeah TGICEEF! Was really looking forward to this one. Have a nice weekend.

@CuttingEdgeEngineering 3 жыл бұрын

Hey Johannes hahaaa love the acronym. Busy week ahead going to enjoy Sunday family day before getting stuck into it 😎👍

@The-bo3hh 3 жыл бұрын

Hey Kurtis, i am a german nondestructive inspection and work with NDT methods: visual testing, magnetic particle testing, radiographic, ultrasonic. I like your work! I like the preparation and I love your welds. I find it very interesting and instructive to see you at work. Thanks for that!! I also like your calm approach. It would be an honor for me to check your welds at some point, if i'm traveling in australia.

@RoscoRSR2 3 жыл бұрын

Aaaah, the moment you flipped the wear plate to expose that pristine edge... Thanks for that! :)

@tommy49er 3 жыл бұрын

My boy has done this before, surely. When you knocked off the tensioning L plate to release the pin, I was like damn thats pro. Even got the plate center the first time ;)

@lov231176 3 жыл бұрын

Побрился, красавчик, вы молодцы ребята, так держать!!!

@Dimythios 3 жыл бұрын

I hope you make good enough money in doing your videos. I'm a old man now but I did a bit of welding and repair in my time so I love watching these types of jobs. I love how you bent that bucket flushed for welding.

@JTLaser1 3 жыл бұрын

I was stationed at a USAF base that supported Cape Canaveral in the ‘70s. There was on huge aircraft hanger that was entirely huge machine equipment; lathes, mills, brakes, and many things I couldn’t guess at. When I started watching your channel it took me back to watching those magnificent fabricators, machinists, and engineers who could make very nearly ANYTHING! Thanks for sharing your talent and letting me Re-live that sense of wonder.

@KhackNerom 3 жыл бұрын

Люблю ваши видео.

@omegagavin 3 жыл бұрын

Clean cut!

@CuttingEdgeEngineering 3 жыл бұрын

The bucket or the beard? 🤣

@aforman1951 3 жыл бұрын

But does the carpet match the drapes?

@keith2860 3 жыл бұрын

Hol up

@jerryglen986 3 жыл бұрын

Hey Kurtis 👍and his boss (Wife😊) I am watching this for the 3 rd time😏. I think the format and Quality of work, is why your videos are easy to watch. Much respect for the hard work your wife does producing CEE CHANNEL. People don't realize the time and cost of making these videos. We also get to learn welding from a master. I have done some welding, but I would be nowhere in your league. I see why you are busy. Quality machinists are hard to find. I pray for more success, and safety for your family and friends. You deserve it. God bless you guys👍😊

@InstrucTube 3 жыл бұрын

That was some clean gouging Kurtis, very nice. For those that haven't done that before, that's a hell of a lot harder than he made it look to do neatly. Spatter and slag like to go everywhere...

@Murphyslawfarm 3 жыл бұрын

Holly Fluck Kurtis you shaved 🤣😂🤣😂🤣😂🤣😂

@CuttingEdgeEngineering 3 жыл бұрын

And got 10 years younger 😂👍

@Murphyslawfarm 3 жыл бұрын

@@CuttingEdgeEngineering I know 😂🤣😂

@richkh 3 жыл бұрын

That's not Kurtis, that's his younger brother Karl!

@Murphyslawfarm 3 жыл бұрын

@@richkh 😂🤣

@alexxxxx12341 3 жыл бұрын

in other words "being a tilt bucket they get the ever living piss beat out of them at the best of times " being an operator we have all been there

@darrinwatts9229 3 жыл бұрын

I must say I dont know any Aussies but you Sir are a cut above most people in the world. Hard working honest and just get it done. Hats off to you from America my friend. Keep moving forward and you will reap the rewards of your labors.

@CuttingEdgeEngineering 3 жыл бұрын

Thanks mate appreciate the comment 😎👍

@Coffreek 3 жыл бұрын

All right, now I understand why it's dark by the end of some of these. Between the outtakes and Homeless, the work slows down, at times. But judging by how much fun youse are having, it's worth it.

@thepotterer3726 3 жыл бұрын

Had no idea that magnetism remaining in the plate would affect its orientation, when it is welded.

@willyd.217 3 жыл бұрын

I'm assuming he's dealing with arc blow. Having trouble getting good fusion when welding vertical?

@jonsingle1614 3 жыл бұрын

I used to make new buckets at Hensley Buckets....Mansfield TX....big or small we made em all 😉

@CuttingEdgeEngineering 3 жыл бұрын

Awesome mate 😎👍

@jonsingle1614 3 жыл бұрын

@@CuttingEdgeEngineering takes ALOT of spools of wire to make a bucket....and your welds are not half bad 😉

@gwharton68 3 жыл бұрын

Its always fun to see how easy you make a job look. My legs will hurt for a week just from watching you kneeling down to weld that moldboard back in.

@ZENERVOLTAGE 2 жыл бұрын

What a wonderful life you are giving your dog. Hats off to ya! Came here for the welding. Left with a new love of staffies!

@user-dr6ti3nc5e 3 жыл бұрын

Грязный ковш от заказчика - всё как мы любим!

@assassinlexx1993 3 жыл бұрын

Doing fine detail with a gouger is hard. That was impressive keeping the cut so straight. Which made it slick welding in that little steel plate 🤣 No chance you will using your truck to deliver. Like 10 times over load capacity. Aussie engineering 👍🦘🇭🇲

@CuttingEdgeEngineering 3 жыл бұрын

Hey mate! Yeah I'm using 2 styles of gouging rods, the round one for digging out the weld then flat rods to help flatten and prep.

@FishFind3000 3 жыл бұрын

Gotta get him a hilux, check out whistlin diesels videos on his. It’s an absolute beast!

@Zertrebender 3 жыл бұрын

Why was it gouged in the first place and not being cut with Oxyacetylene or an Plasma cutter

@aerobar2551 3 жыл бұрын

@@Zertrebender he’s just removing the weld material rather than bucket steel aswell.

@lapotier 3 жыл бұрын

That's actually my job to make those buckets up here in Canada!! I mean, a machine the attachment, quick attach, pin grabber, countersink the reversible blade, etc.. Keep up the good job!

@jraltwies 3 жыл бұрын

That is the happiest dog I've ever seen.

@lordhoho1 3 жыл бұрын

Great job so now when he pinches the machine treads again they will come off and the bucket will be fine

@U.F.O.Technology 3 жыл бұрын

Clean-shaven.Young.Молодой, после бритья.

@CuttingEdgeEngineering 3 жыл бұрын

😏😏😏

@bobandres5559 3 жыл бұрын

Another satisfied customer. Good job man. A lot of work for one moment of stupid. Keep on fixing. Thanks for posting.

@markmead4047 2 жыл бұрын

Kurt, I am really thankful you are inclined to share your expert take on rebuilding fab work you make it look easy but the years of training people never appreciate thanks for being on u tube for us to watch and learn.

@emilspageofrandommachinery1714 3 жыл бұрын

Really liking all the vids so far, especially the hydraulic pistons, rods and barrels. As someone who repair quite a few buckets yearly this one had me wondering why? on several methods used. Stuff that differ from the usual way i do it. Removing old base edge, i take the oxy / acy x11 no4 nozzle and cut that one of..prob 30 min work for a bucket as clean / simple as that one. I try to straighten the bucket floor if possible (crazy how most grading buckets turn up at the shop with the bottom hammered up in the middle). I always try to get a good weld angle and never weld from bellow. Why not getting the base edge holes counter sunk to save those nuts from wearing out when you got decent thicknes on the part? Not saying my way is the way to go, i hope i don't come across as a know it all keyboard warrior asshole. Well thats enough rambling from my part, and i hope i didn't mess up the English completly, since i am a Swedish Swede. /Emil.

@x1Conan3Spartan0x 2 жыл бұрын

So long story shorty.. you know of another more thorough way than this? I didn't think someone could be more impressive.

@Christeky Жыл бұрын

I know that you made this comment about a year ago. However, this tip is timeless: Try not to make everything about you. 😏