Believe it or not, this is a PLASTIC BOTTLE!

No video

Believe it or not, this is a PLASTIC BOTTLE!

Рет қаралды 167,479

Күн бұрын

Hi everyone!
In this video I'll show you guys how I made a Jet Engine using an Yakult plastic bottle as a base! If you love what I do, please consider supporting me on Patreon: / cuttransformglue
You can also become a member, right here on this very platform ;)
----
Here are some of the products I use on a daily basis. As an Amazon Associate I earn from qualifying purchases.
Some of these tools I use on a daily basis, others are well know brands that could be useful on your model making journey!
My editing setup
Mac mini M2 Pro: amzn.to/3VRYpzj
Focusrite Scarlett Audio Interface: amzn.to/4beSKaY
Tools used on the shop
Dremel Tool: amzn.to/4csb15M
Dremel Basic Accessories: amzn.to/3RFsK1P
Dewalt Power Drill: amzn.to/3XyMJmk
My Favorite Airbrush: amzn.to/3zoEz5W
My favorite CA Glue: amzn.to/45DcBQa
I print my parts on a Ender3 S1: amzn.to/3VShMIA
Sonic Pad: amzn.to/3XtnKky
-----
Tracks used in this video:
Honeys Pie by Wake - under CC BY 3.0
freemusicarchiv...
creativecommon...
This is Not Punk - True Cuckoo
Insomnia Pt 1 by Meydãn - under CC BY 4.0
freemusicarchiv...
creativecommon...
-----
#modelmaking #diorama #modelbuilder

Пікірлер: 292

@Dolmeca_the_Knight 4 жыл бұрын

Fun fact, since you didn't touch the inside of the bottle, you can still use It.

@CutTransformGlue 4 жыл бұрын

That's true! Maybe I'll start making custom water bottles to kill time in this shelter in place!

@raymon3206 3 жыл бұрын

What..😂

@EMTBonsai 3 жыл бұрын

Jet engine Shot glass! Bugger the yakult lol

@grympzofficial1256 2 жыл бұрын

Just slurp out that star wars juice

@justindunlap1235 Жыл бұрын

It would make a sweet stash spot if it was incorporated into a larger project.

@MODELMIND72 3 жыл бұрын

I love scratch building,. In this type of modeling there are no restrictions.To build and create something out of nothing is the highest level one can achieve. adding this style to your models also turns them into one off works of art masterpieces.

@jaytc3218 3 жыл бұрын

Adding the wires was a nice touch to give the appearance of hydraulic fluid and engine lubricant lines. Well done!

@CutTransformGlue 3 жыл бұрын

Thank you :)

@Thug_Nuts1 4 жыл бұрын

Keep this up man, you’ll be a big channel soon enough, talent like this doesn’t go unnoticed!

@CutTransformGlue 4 жыл бұрын

Thanks a lot, this means a lot!!

@AbsoluteRecoil 4 жыл бұрын

Very awesome we have the video of this iconic scratchbuilt model I’ve been seeing kicking around the Internet for a long time!

@CutTransformGlue 4 жыл бұрын

Thanks a lot buddy!

@Lolleka 3 жыл бұрын

I forgot how incredibly awesome your channel is. Came back to admire the disc sander and got lost in your videos...

@CutTransformGlue 3 жыл бұрын

Thank you, means a lot :)

@rentner66 2 жыл бұрын

Great job!

@THROTTLEPOWER 2 жыл бұрын

Very cool.................. 👍👍👍

@CutTransformGlue 2 жыл бұрын

Thanks :)

@brettsalter3300 Жыл бұрын

Love your design sensibilities and proportions. Excellent!

@adamshelley2011 4 жыл бұрын

Amazing as always. It takes a great eye to place details that look like they're there for a reason and a functional part of the model, not just details for the sake of details. Love it.

@CutTransformGlue 4 жыл бұрын

Thank you so much buddy!!

@zakkhuitema3748 Жыл бұрын

at first i was partial on the use of the laser cut parts. im more into the use of only scrap and rubbish parts. but the end result was amazing. great work

@krzysztofmathews738 3 жыл бұрын

This is excellent work, and a solid demonstration of process. Well done!

@CutTransformGlue 3 жыл бұрын

Thank you so much!

@jerrybailey5797 2 жыл бұрын

Stunning model,of a jet turbine engine , amazing attention to detail 👌

@CutTransformGlue 2 жыл бұрын

Thank you!

@richardbailey3343 3 ай бұрын

This transformation proves a very important point it doesnt take alot to fool or trick the masses with props and visual trickery.😮😮😮 regards

@LuizWEB67 3 жыл бұрын

When I was a kid I even put together a formula-1 car only with empty bottles of Yakult kkkkk but that is another level, today I am doing a city bus project where the tires I am using these same bottles. Your project is magnificent.

@CutTransformGlue 3 жыл бұрын

That's so awesome, keep going and thanks for your comment!

@samsandoval1 9 ай бұрын

I'd like to see how you'd create your own Maschinen Krieger Falke antigravity vehicle. The bottle is a major feature of the Falke.

@crazynewt1815 3 жыл бұрын

Amazing 😮

@CutTransformGlue 3 жыл бұрын

thank you!

@devileanblack 4 жыл бұрын

Amazing build. Would totally use a similar build for my Warhammer 40K terrains. Keep up the good work.

@CutTransformGlue 4 жыл бұрын

Thanks a lot!!

@rmaiabr 3 жыл бұрын

So nice.

@CutTransformGlue 3 жыл бұрын

Thanks!

@kenjackson5938 7 ай бұрын

When I saw this… I had to sub!! Simply Amazing. Going to have to check out more to get my sci fi mojo going! And I think getting a laser cutter just moved up on todo list.

@Ravioli_-vd4wb 3 жыл бұрын

After it got painted it looked like an actual model kit, good job 👍

@CutTransformGlue 3 жыл бұрын

Thanks a lot buddy!

@Daniel-Strain 3 жыл бұрын

Great work! Would love to have seen a weathered wash on this, maybe some grease and oil look.

@CutTransformGlue 3 жыл бұрын

I'll make a second one someday so that I can paint and weather it! Thank you

@bearshield7138 2 жыл бұрын

nice job

@ConkysGhost 2 жыл бұрын

That is the exact bottle they used on the SF3D Falke anti-gravity fighter.

@avqcdsar9617 3 жыл бұрын

very nice!

@RonanPaixao Ай бұрын

Obra de arte! Parabéns!

@jeffreymoffitt4070 Жыл бұрын

Dude! I need to see you install this into a scratch built space ship!!

@scaletownmodels Жыл бұрын

I've always though the yakult bottles had a cool little shape to them. Great use of it.

@The_last_prime 3 жыл бұрын

You're a genius man now this is talent

@CutTransformGlue 3 жыл бұрын

Thank you so much!

@Virakotxa 4 жыл бұрын

So good! It totally looks like a detailed replica of some real design! Judging by the thumbnail I thought this was going to be some obsessively detailed reference-heavy project! This way I love it waaaay more! Really inspiring! Glad I found your channel! You need to get some AK Interactive Weathering "kits"... I come from painting miniatures with acrylics, and recently re-discovered the wonders of enamels, (and oil-paint) plus twenty years of development on the stuff, since I first started using HUMBROL... All those years ago...

@CutTransformGlue 4 жыл бұрын

I'm really happy to hear that, thanks a lot! I'll look for those paints, see if I can find them!

@johnkelley9877 3 жыл бұрын

Outstanding work! Thanks for sharing this.

@anthonyshealy 2 жыл бұрын

This was a really cool build!

@CutTransformGlue 2 жыл бұрын

thank you!

@eligebrown8998 2 жыл бұрын

Looks great. I'm working on my first scratch build. I'm building a little landing craft out of a plastic egg thing your supposed be able to boil eggs with. So far it's on the wright track

@CutTransformGlue 2 жыл бұрын

That's awesome! thanks buddy and good luck with your build :D

@gabrieldai88 2 жыл бұрын

saudações brasileiras! ótimo trabalho!

@CutTransformGlue 2 жыл бұрын

Muitíssimo obrigado, amigo!

@ScratchBashing 4 жыл бұрын

Very nice! I love all the tubing and wiring.

@CutTransformGlue 4 жыл бұрын

Thank you buddy! Not the "single item challenge" you gave me, since I used lots of other bits and pieces, but had fun anyways :)

@byronugalde3158 4 жыл бұрын

You are a well skilled and talented creator, congratulations mate!

@CutTransformGlue 4 жыл бұрын

Thabk you so much!

@ModelingSteelinHO 3 жыл бұрын

Wonderful build !

@CutTransformGlue 3 жыл бұрын

Thanks a lot!

@GbreakerDX 4 жыл бұрын

Awesome tutorial! Learned some new stuff from watching your video

@CutTransformGlue 4 жыл бұрын

Thanks a lot buddy, I'm happy to hear that!

@daedalus9218 8 ай бұрын

Good job. Very impressive.

@griffinotte7659 4 жыл бұрын

I love all of your videos man, this is definitely no exception. Great work!!

@CutTransformGlue 4 жыл бұрын

Thank you for your words buddy!

@dmmomma 4 жыл бұрын

Really inventive! Simple, smart ideas that came together! Great buiid!

@CutTransformGlue 4 жыл бұрын

Thanks a lot, buddy!!

@darrenlongshanks5102 3 жыл бұрын

Great job - looks fantastic!

@CutTransformGlue 3 жыл бұрын

Thanks a lot!

@onkelgroen 2 жыл бұрын

Huh, just discovered your channel. Instant sub, love trash-bashing! I have a good amount of "components" stashed in the garage, away from wifes eyes and kids grasp...

@CutTransformGlue 2 жыл бұрын

Thank you so much and welcome buddy!

@rujv200 4 жыл бұрын

The WiFi antenna bit - love it!

@CutTransformGlue 4 жыл бұрын

Thank you so much!

@andrewjames6430 3 жыл бұрын

I believe it could fly

@moonscrafts8987 2 жыл бұрын

Incredible

@CutTransformGlue 2 жыл бұрын

Thank you :D

@barrywhitfield930 3 жыл бұрын

Wow! That's awesome!

@CutTransformGlue 3 жыл бұрын

Thank you!

@earthmanbrick 4 жыл бұрын

Excellent work, certianly BTFOs my own miniature generators vid. Very nicely editted & I love the attention to detail as well as the going the extra mile in terms of precision. Amazing job, dude

@CutTransformGlue 4 жыл бұрын

Thank you so much!

@negotiableaffections 3 жыл бұрын

The pipework you achieved with epoxy putty was inspirational! Finding tubing is easy in all sorts of sizes, but making the curved corners is less successful, the 'bendy' drinking straw is not clean enough and bending tubing is never 100% effective. Thanks for a workable solution - i shall have to try it. And a great project with the 'famous' yakult bottle - it is such an engine shape, but you've disguised it brilliantly. Nice work.

@CutTransformGlue 3 жыл бұрын

thanks buddy!!

@wafikiri_ 3 жыл бұрын

Trick for nicely bending any bendable tube: fill it with sand before bending. This way the tube won't give up in the curves. Some materials (e.g. plastic) may need some heating; metals won't. Wood tubes would require wetting or vapor treatment, and heating.

@nikond90ful1 4 жыл бұрын

Thanks for the video. Really good skill shown and lots of good ideas in these videos, Keep up the good work. Keep safe and stay well

@CutTransformGlue 4 жыл бұрын

Thank you for watching buddy, I'm glad you liked it! Stay safe!

@shadowr2d2 4 жыл бұрын

This is an Amazing build. You have a new subscriber. Thank you for posting this video..

@CutTransformGlue 4 жыл бұрын

Thanks a lot for watching and subscribing!!

@firvedamodels 2 жыл бұрын

Perfeito ..prezado.

@LaserGadgets 3 жыл бұрын

I would sand the bottle with a quite rough sanding paper before glueing anything to it. Should be PE or PP plastic...nothing you can glue very well. The engine looks hot though! Inspired by TWA?

@CutTransformGlue 3 жыл бұрын

The plastic is so thin, I was really afraid of trying to remove any material from it! Even thought of adding something to the inside, like a resin... But I see your point! Thanks buddy :)

@LaserGadgets 3 жыл бұрын

@@CutTransformGlue Ruffing it up a bit will help alot though. Adding epoxy will not work well. Generates heat and I think even a lil bit of heat will make it warp.

@zzorz1023 3 жыл бұрын

While most food bottles are made from one of the waxy plastics, Yakult bottles are actually polystyrene, which is why they're so popular in modeling circles. Can be glued/welded with any plastic cement.

@LaserGadgets 3 жыл бұрын

@@zzorz1023 Hm, not sure about it. Would be great indeed and easy to work with!

@zzorz1023 3 жыл бұрын

@@LaserGadgets it's definitely polystyrene. Have you ever used one before? I have several sitting here, has PS on the recycling symbol and melts in acetone. Also means it's easy to paint.

@shannonlykins1630 2 жыл бұрын

Man Great job Hey you should build a scrap version of Fire Fly that would be 😎 Shiny oh so Shiny

@Wulfenray Жыл бұрын

Just discovered this channel, WOW! amazing job you do! i loved all you models. I make models from scracth also, and I know the work they take. You are spanish or Latin American, I was surprised to see the bottle with letters in Spanish. I am Spanish.

@Viking-ep7yg 7 ай бұрын

Brazilian plastic bottle !!! 😮😊

@rhysbond9826 3 жыл бұрын

Awesome work sir, inspiring imagination

@CutTransformGlue 3 жыл бұрын

Thank you so much!

@adamgardiner5869 3 жыл бұрын

Subbed off this video in my recommends. Great kitbash mate!

@CutTransformGlue 3 жыл бұрын

Thanks a lot :)

@denlimwolf460 Жыл бұрын

Pretty sure I'm not the only who has mentioned this, but jet turbine engines usually require a lot of air through an intake. Other than this, i would say you made the moc engine look detailed and quite realistic. Cheers.

@THM.miniaturestreetart 4 жыл бұрын

Awesome mate! I have seen the first part of the video on instagram and I needed to see how you finish it 👍👍👍👍👍👍

@CutTransformGlue 4 жыл бұрын

Awesome, thank you for watching!!

@marccxxshammer6643 4 жыл бұрын

Cool 👍. Thank you for showing

@CutTransformGlue 3 жыл бұрын

Thanks for watching!

@carstenkoloc5226 Жыл бұрын

Exellent !!!

@LeonardoDaVinci01 3 жыл бұрын

You should make a plane for that badass engine!!

@CutTransformGlue 3 жыл бұрын

I've been thinking a lot about that.. not a plane but a spaceship!

@LeonardoDaVinci01 3 жыл бұрын

Oh sick! That’s even better!

@starivokstratikov4869 2 жыл бұрын

wow! daredevil the little ant! 7:13

@6666toatakara 4 жыл бұрын

Wow this reminds me of the jetmotor on the hasegawa falke 1/20 model kit. I'm convinced Kow Yokohama (the designer) use the same bottle as the base!

@CutTransformGlue 4 жыл бұрын

Yeah, I bet he did! Modellers have been doing so, I believe it's kind of a tradition of the ma.k modellers

@gstealer11 3 жыл бұрын

Hey did on the original and it was a hot item to get exported from Japan back in the day to scratchbuild a Falke

@TheInsaneupsdriver 2 ай бұрын

should've added a weak fan, LEDs, and stringers in the back to simulate a flame.

@mysteryunwrapping9518 3 жыл бұрын

Your hands is a 3d printer mate. Gj!

@CutTransformGlue 3 жыл бұрын

Thanks a lot buddy!!

@darkage5 2 жыл бұрын

Speaking as someone that had to work on aircraft engines for 3 years. you are missing about 500 clamps on all those wires LOL.

@joshmarkobb4513 4 жыл бұрын

Killer bro! I love it!

@CutTransformGlue 4 жыл бұрын

Thank you!!

@keroro0938 2 жыл бұрын

Just discovered kitbashing and scratchbuilding just now, and got overwhelmed by your works, especially the details like wires and pipes. I’m curious that do you have to figure out all the functions, purposes and reasons why the tubes and wires are connected that way when you’re looking at the references or you just mostly focusing on trying to replicate the greeblie look? I’m an art student and wanting to create realistic mechs, but these details kinda pulls me back and I don’t know where to start the research, school teachers don’t offer practical suggestions is sad. :(

@CutTransformGlue 2 жыл бұрын

Thank you so much! I'm constantly thinking about the functionality of the pieces I create so.. Not that I can distinguish the function of each wire and pipe, but I try to make it like they serve a purpose on the overall design!

@ChimeraWargaming 2 жыл бұрын

It's a cool work. I'm just subbed here

@CutTransformGlue 2 жыл бұрын

Thank you!

@arsitekyoutube Жыл бұрын

i thik this very detail

@bonecos_do_maninho1971 3 жыл бұрын

Parabéns. Perfeito

@CutTransformGlue 3 жыл бұрын

Muito obrigado!

@Codename-B 3 жыл бұрын

Insta-subbed. Great work here! Just a tip. Glue a fine grit sandpaper on one side of our cutting metal ruler. It makes a world of difference when cutting plastics.

@CutTransformGlue 3 жыл бұрын

Thanks a lot buddy, for the comment but also for this great tip!!

@rikyaji23 4 жыл бұрын

Awesome

@CutTransformGlue 4 жыл бұрын

Thank you!!

@_ThatBandKid_ 3 жыл бұрын

You mad lad I used to drink that

@protiod 2 жыл бұрын

Any tips for finding old electronics to take apart? My friend group is weirdly bad at buying unnecessary stuff.

@CutTransformGlue 2 жыл бұрын

I get used old electronics usually from friends, dumpster diving, things like that :D

@alexandreferreira8346 3 жыл бұрын

Clearly brazillian accent! XD Great content! Thanks for sharing! :)

@CutTransformGlue 3 жыл бұрын

Hahaha, obrigado amigo! Seja bem vindo

@alexandreferreira8346 3 жыл бұрын

@@CutTransformGlue valeu! continua produzindo! eu estou começando nessa arte e valorizo muito o aspecto reciclável.

@EMTBonsai 3 жыл бұрын

Maybe should have used abit of pva with the CA for shock absorption pretty cool though

@CutTransformGlue 3 жыл бұрын

Oh really?! Never heard of that, I'll give it a try! Thanks

@dominiquea.j.lallement228 Жыл бұрын

When will you decide that such a powerfull engine deserves a beautyfull aerodinamic home?🐸🇫🇷

@CutTransformGlue Жыл бұрын

Oh, I would make it completely different these days.. so that one will live as it is!

@themechbuilder6171 2 жыл бұрын

how did yakult end up in a mad scientist's hand?

@CaptainsDrydock 4 жыл бұрын

Now that's imagination!

@CutTransformGlue 4 жыл бұрын

Thank you so much!

@customfabrications 4 жыл бұрын

I just found your channel, and of course subbed. I just thought I’d let you know of a great source for some cool parts for detailing models. Try to find a bunch of vacuum tubes from old TVs and radios. Carefully brake the glass and you’ll find lots of interesting little metal pieces. Just check the part numbers first because some tubes are valuable. Most aren’t, but some are. Keep up the great work.

@CutTransformGlue 4 жыл бұрын

Thanks a lot buddy and welcome! I'll look for old TVs and Radios then! Thanks a lot for the tip :)

@priceostia6292 2 жыл бұрын

I didn’t know Yakurt exists outside my country.

@-MrFozzy- 2 жыл бұрын

If you ever sell a huge pack of your cnc wood shapes……I’m perfectly happy to pay good money!

@ericteixeira8623 4 жыл бұрын

Obrigado pelos excelentes vídeos e parabéns. Tudo fica maravilhoso. O que você usa na ponta da garrafa da TEKbond? esse aplicador ajuda MUITO.

@CutTransformGlue 4 жыл бұрын

Muito obrigado! O dosador da cola eu mesmo que faço, vou fazer um video ensinando e postar aqui no canal em breve!

@TATAclay 4 жыл бұрын

It very cool...

@CutTransformGlue 4 жыл бұрын

Thanks a lot!

@marcmoreno9663 4 жыл бұрын

As usual, great job ! ;)

@CutTransformGlue 4 жыл бұрын

Thank you!

@alexanderkahle2384 7 ай бұрын

What a work ,👌. How did you prepair the blue botle.

@thecontendingforthefaith 3 жыл бұрын

just needs a wash to bring out the details

@CutTransformGlue 3 жыл бұрын

I agree! :)

@vitorcarvalho7832 4 жыл бұрын

I don't know if anyone has commented this fact but the bottle is all in Portuguese. I guess it might've been bought in Brazil.

@CutTransformGlue 4 жыл бұрын

Yes it was, I'm from Brazil :)

@vitorcarvalho7832 4 жыл бұрын

I knew it. I am Brazilian as well. There was no way I would pass up this detail. I had noticed your accent sounds a bit Brazilian. Nice channel. I am learning a lot. :-)

@ashtonholbrook5908 Жыл бұрын

I realize this is an older video, it is great work though! Thank you for sharing. Can I ask where you got the random MDF circles and shapes? I imagine this would be tremendously helpful, but those laser cutters are expensive…

@CutTransformGlue Жыл бұрын

Thank you! I use laser CNCs from maker spaces :)

@geronimo8159 3 ай бұрын

What material is that precise nozzle of your ca glue made of? Is it possible to buy them like this?

@haroldmarticio181 3 жыл бұрын

Can you please make a video on how to scratch build midoriya’s mask, I lost my figma midoriya’s mouthpiece. Thank you!!!

@DarkChewie 3 жыл бұрын

Discovered you from brasil 😂

@CutTransformGlue 3 жыл бұрын

Bem vindo!

@DarkChewie 3 жыл бұрын

Me tira um dúvida, vi que tu fez o macete da agulha hipodermica com tekbond, faço algumas kits da revell e já tentei fazer esse truque da agulha, mas nunca dá certo, qual o macete? Acho um absurdo a revell custar quase 50 reais 😂