Nice video mate! I am looking forward to the one from riding the final bike :)

Absolutely beautiful ebike. The CyC motor looks like it was designed for that bike. Can't wait to see it in action.

Very clever design. Lads. Fair play to you!

Fajny build Lukasz 💪

Very nice guide video!

Awesome Great demo 👍

That's exactly what I wanted to build! Thank you

That’s why these damn motors are kinda difficult to get, this fuckin guy bought them all

I considered this motor, but they still seem to have issues with magnets becoming detached and other issues. Shame really as it's a neat unit with some nice tech. I opted for the bafang HD, not as neat or as technical as cyc, but seemed more reliable.

Great to see how simple it all is. I think you could have trimmed it a little to have a tighter edit but over all this is great.

You should put throttle on left side. Handgrip - throttle- brakes-lcd.

I'm wondering why not put the motor on a big heavy fat tire bike with big rack on back.? Huge 7 speed bike frame and fenders with a rack.. Built for commuting and comfort. Suspension post and cloud 9 cruiser seat.. Put 2 of the 72 V 20 ah batteries on back rack with a battery blender. Have a nice rear heavy duty gear set. Then you have a great comfortable cruiser fat tire bike that can go 40 mph and with a 80 mile range . 👍

Where did you get the battery pack? Do you have a link for the BMS?

Would´t it be better to mount a bike rack and mount the battery on it above the rear wheel?

make some more videos on the 20kw bike

I put the CYC gen2 with (BAC) 855 on my bike. The power is intoxicating

Looks good. I see you put padding between the motor and the frame which is important because CF does not like abrasion. Also I hope you have a good disconnect from your battery pack to the bike for when you crash or fall off the bike. The controller seems small for the amount of power you might draw. What about a bash plate to protect the motor?

hey buddy great vid.. what do u do if u have a press fit and u dont wanna take out BB? can u use it with the stock BB.. i have scott gambler 710

Fajna rzecz

Are those special tools for the brackets included or is it also money trashing?

Nice job. Expensive tho...

nice motor bat do you have normal bettery like bafang installation kit

so0 nice the best looking and highest performance ive seen yet man how about me ride and advertise for yall id get you sales no one in jersey is doing ebikes just yet but me

Do you hit the motor when riding? Seems low.

How much is the 20,000w ebike? Whats the range on it too?

Is the whole kit waterproof?? Rad build man!

would this kit fit on a mid bb like a bmx bike?

These kits look really good ... but 40% more expensive than the Bafang 630 Mid Drive unit. Such a shame as it just makes it that much more expensive to convert and when want power and are price sensitive.... this kit is just too expensive to consider. (I almost bought one last night ... but instead bought the BAFANG unit out of China.

Any go up to 120mm crank?

Pozdrawiam.

Website says no parts available 🤷🏼‍♂️

How much do you charge to put this on a bike for me? I could do it but havnt got time for a long time

That controller won’t allow the system to reach 5000watts. You’ll need the larger controller, the BAC2000 which needs to be mounted separate from the motor. Awesome build and fit of the motor!

Does it even ride? Got any video?

5000 volts ✨✨

It looks nice. But why that extra chain and not a closed gear like the BBS Bafangs? Isn´t an open chain more prone to wear and dirt than a closed gear housing?

high guys ,please help on were i can google and order this motor online .a link would definitely help

يعطيك الصحة ... و ليه ذلك المغناطيس فهل للعداد أم للفرامل الخلفية ؟😂😂😀😁

Power 5000 volts ?

I would really be Interested In this conversation kit, as I have a brand new European folding bike, fully built but unridden, so I am In the market. I hope to see the following video, as I want fun. I can't see any problems, can you? Please bring on the next level, as only been Involved on E-Bikes. As mentioned, not long at all, I was on a motorbike beforehand. Would this be COMPATIBLE with the fully built, folding EUROBIKE good suspension & I have iT made & waiting for the correct kit?

No way it's 5000 volts. That would be incredibly dangerous. You probably meant 5000 watts and that's really high for an ebike motor. Also, what's with the square shank spindle and crank arms? Those inevitably work their way out over time and become very frustrating.

المسافة ؟ و السرعة القصوى ؟

Do they ship to the united states?

Where did you buy that sprocket remover tool at? I need to do the same and remove that sprocket from my cyc x gen 2 motor as well, please help, thank you

I'd be concerned about that amount of torque through the spokes of a push bike wheel, are you planning on upgrading the wheel?

Θα μπορουσατε σας παρακαλω να μου πειτε την τιμη απο αυτο το μοτερ.σας ευχαριστω.περιμενω απαντηση σας.

dis he say 5000 volts?

You don't show the continous current draw. My bike is 48V @ 40Amp continous draw which is 2000 watts basically. Cyclone motor which is a lot larger by comparison but cheaper.

This square taper bottom bracket on a downhill bike, hmmm, seems legit! 🤣😂

He did not publish the follow-up video of him testing this build. Should we assume the worst?

If the battery is carried in a back pack or mounted on the bike, it's still under the same load. Just say you didn't have the room to mount it.

you dont need to remove the pinion gear to put the chain on, wow, that's crazy

And where is the test, ı wait one year!

Has it Bafang brake connectors ?

witam swietny filmik ! Jak z zywotnoscia tego silnika ?? Mozna wiedziec jaki jest stan licznika na ten moment i czy cos bylo wymieniane?? Pozdrawiam

so.. you put thermite grenade on your back for when you fall off and land on it?! Just be sure to be recording this when you do fall off please. Good video, much youtube revenue when pack is damaged and BIG fire!

5000 volts? 5000 watts maybe.

Beautiful E-bike conversion , only a dream for me , too poor

Bardzo fajny filmik. Mam dwa pytania jaki prąd zasila silnik ile Volt i możesz podać producenta ściągacza tak żebym mógł gdzieś go kupić mały zwinny napewno się przyda

Where is the test video my friend?

Awesome video guys😎 will this motor be too much punishment for a Mondraker Foxy Carbon RR SL 27.5" 2018 150mm ? Not as hardcore as the Summum Pro suspension, but if it will work maybe I can order it from you guys (based in England, UK 😉) the battery is 72v & weighs 5kg in this video?👍🏿

So that must be the old one new one looks works better,

Wszytko fajnie ale kobra na kwadrat

not 5,000 volts, it's 5,000 watts or about 6.7 hp...

That drive chain will have a short life with the extra torque from the motor.

"A bit of extra power compared to E-MTB" E-MTBs are like 500W lol so it's more like 10x the power

I wana buy this motor for a project whats ur top speed

Be aware that the maximum torque to reach the gearing is 240 Nm. If you are considering an enclosed planetary gear solution, stay away from anything but the Pinion transmission, up to 18 speeds. It has a 240Nm torque rating the Rohloff for instance has a rating that is 1/2 that. it will also eat up the smaller rear sprockets if you run it with the full 72V. it is a well-designed amazing power assist solution, with both torque and cadence sensors. The first reduction consists of metal planetary gears on the end of the motor, then a sprocket and heavy chain reduction. In contrast, the BAFAND BBSD and UKTRA have all internal planetary gears for motor speed reduction and they are nylon, there are aftermarket metal replacement gears. the controller ith it MOSFETS and Capacitors are all housed in the same container as the motor. the CYC has an outboard controller which is far better for heat dissipation.

5000 volts!!! That’s 200 mph easy!!

So being able to use alternate controllers for this motor kit, would the Phaserunner from Grintechnologies be a worth candidate to pair with it?

I believe most chains have a 'master link' that can be removed. I think that might have been a simpler solution than removing the sprocket from the motor. kzfaq.info/get/bejne/oJeJfZt5y5O2eZ8.html

damn how many bills did that bike cost ?

5000 WATTS NOT VOLTS MABE 48-52 OR 72 VOLTS

5k watts not volts.

.

Remove the motor sprocket was completely unnecessary!!! Just install the motor chain first, then the chainring sprocket on the bike and last the bicycle chain from the cassette

accent de roman

too many chains. fail

Power 5000 volts ? Please consult wikipedia before making videos .....

5000 volts .. lol. Power is measured in watts

Evolution Power bikes are intelligently designed, not evolved.

5000v... lol , this guy has no idea

Before you post another installation video of anything, YOU should watch or consult the PROS on how to install things correctly and properly. SHAME...