I hope this restoration video can be useful for others #bikerestoration #vintagebike #ASMR
Пікірлер: 161
@cefnonn2 жыл бұрын
After doing a renovation of a big old Holdsworth, I found out that even though the frame was rusty, it was still "strong". The general strength of the frame didn't seem to be affected. A bigger worry was the condition of the b/b threads. The shells had a lot of play when I screwed them in. I think that this might be the decisive thing for many renovations ie, how bad do the b/b threads look? What do people think? Nice video!
@ibastiasoficial2 жыл бұрын
Colors aren't my favorite but, it's a beautiful rescue you made to that 'almost lost' piece of jewelry.
@acewilliams79172 жыл бұрын
Try 50/50 acetone and transmission fluid on old rusted parts. It works wonders. Nice bike by the way. 👍
@CycleFields2 жыл бұрын
Thanks
@markmiller95792 жыл бұрын
A great skill to have. Few people can do work like this. Fewer would want to. It looks overwhelming.
@CycleFields2 жыл бұрын
I love this job 🤩❤💯
@fLx-x3 жыл бұрын
Loved the entire video, keep doing what you do cause you're great at it!
@fikrikamilggs_tv82633 жыл бұрын
Woww.. kereenn omm kinclong 😎👌👍
@dharshanshoban76023 жыл бұрын
Wow what great job we need more videos. That Shimano SIS group set was founded in late 1984
@bojankolundzija60912 жыл бұрын
Absolutely perfect!
@robertospagnuolo674 Жыл бұрын
That's incredible !!!👏👏👏👏👏👏
@anthonyharvey97192 жыл бұрын
Beautiful bike restoration best I have seen rusted up scrap to shop bike amazing
@abhiseksaha32213 жыл бұрын
The result shows the dedication level... great work! What's the widest tyre this frame can take?
@user-xz3xf6bc8o Жыл бұрын
1983 : We will have flying cars 2023 : We have road bikes
@CycleFields Жыл бұрын
Yesssss
@asamicat83233 жыл бұрын
Amazing job, well done
@asdinw18613 жыл бұрын
Langsung subrekkk
@senenrc Жыл бұрын
THE REAR BRAKE!
@supernaryon9m259 Жыл бұрын
Cakep-cakep semua ngiler
@manhphongbui57972 жыл бұрын
Thật là đẹp . Phục chế thật chuyên nghiệp. Ước gì mình có được chiếc xe đạp đó.
@fdannyel2 жыл бұрын
Trabalho magnífico.
@restaurandocoisasvelhas2 жыл бұрын
Beautiful work.
@Deminutuv3 жыл бұрын
Beautiful work and bike! Seemed impossible.
@kris46452 жыл бұрын
Man, that would be a beautiful fixie! Nice work,and greetings from Croatia 😊
@CycleFields2 жыл бұрын
Thanks man 😙✌👍💯💯💯
@kris46452 жыл бұрын
@@CycleFields you're welcome! Keep up the beautiful work!👍✌️😎
@DobriyKorm6 ай бұрын
Класссс!!!! Подскажите какой фирмы передняя звездочка и шатуны?
@zuraidahidrus59963 жыл бұрын
Kalo dapat sepeda bahan Stem dan sitpost ga macet itu lega banget😁
@Mauricio-sm6vj3 жыл бұрын
Beautifull work brother! 💯
@marcmasterson93653 жыл бұрын
Hi Guys Wow That Look Great Now Retro Bike I am Just Doing My Self Another Retro 1990s Trek Y3 Bike My Self Keep It Up Stay Safe All Best M. England.
@Adasepeda3 жыл бұрын
Mantul 👍👍👍
@leonimoreel308 Жыл бұрын
Nooo que chulada parece de las muescas de esta generación el blanco le da buen toque más la cinta del manillar uff hermano que monstruo
@goto18972 жыл бұрын
good job👍 まさか、本物の長澤?そこにそんなものがあるとは驚きです。😵💫
@andreyrozodominguez80503 жыл бұрын
Muy elegante 👌
@imanharionomirawan88213 жыл бұрын
Beautiful bike bro 👍👍👍
@RESTORATIONOFSCRAPMETAL3 жыл бұрын
A lot of effort and great results, like👍
@RESTORATIONOFSCRAPMETAL3 жыл бұрын
@@CycleFields Such a lot of work is not done quickly.
@dimansabin9802 жыл бұрын
@@RESTORATIONOFSCRAPMETAL 777756
@rafaelarezende26319 ай бұрын
Very cool man, i love the color you chose
@willycano82613 жыл бұрын
No tarda en caerse la pintura, no se lijo como debia el cuadro, el oxido brotará muy rápido
@karlitozdelarosa19272 жыл бұрын
Que me recomiendas quiero pintar los frenos para darles otra vista
@rogueonegraffiti2 жыл бұрын
👏👏👏👏 Great work
@World-tt1lk3 жыл бұрын
This work is perfect, namas las pinches masas son de cambio rrapido de abrazadera nmmes
@serigalaberbuludomba3 жыл бұрын
Kereeen, budgetnya tipis juga nih ya mas😳
@ALONGDAFY3 жыл бұрын
Mantap.....
@MCcreedLP2 ай бұрын
Beautiful
@CycleFields2 ай бұрын
Thank you! Cheers!
@jacobode72392 жыл бұрын
I'm thinking of starting to restore bikes but don't know that much about bikes and a bit worried about ordering parts and getting the right sizes. Do you got any informative videos on this?
@purpleRider053 жыл бұрын
Absolutely love restoration videos like these I'm glad I found another great channel :)
@Peo_Sahlin2 ай бұрын
Hey, dude!!! That chain master link doesn't work with derailleurs.
@junkobison3 жыл бұрын
Gile keren om \m/
@weebrahim2 жыл бұрын
You're amazing
@seansollars702 жыл бұрын
Nice work
@JuanRamirez-rb6lo3 жыл бұрын
She came out clean! I just picked up a kobe chaparral it says Made In Hong Kong do you know anything about it..
@robertodeangelis904410 ай бұрын
What about the rust inside? How do you treat the inside of the bike?
@CycleFields10 ай бұрын
Comenly no need. But sometimes i epoxy the inside
@adrzl0026 Жыл бұрын
Received a free vintage bike from a customer and now I feel a little intimidated restoring it after watching this video 😅
@p_khale072 жыл бұрын
Great restoration ✨ Any links to these wheel set ?
@CycleFields2 жыл бұрын
Www.tokopedia.com Its just avaible in Indonesia Sir.
@Longistheroad3 жыл бұрын
Nice job
@pogisikiah2 жыл бұрын
friend, what type of bottom bracket does your bike have before restoration, is it squaretype?? thanks for answering
@CycleFields2 жыл бұрын
Yes square
@damianperez18942 жыл бұрын
una belleza
@user-le4mc3gl8g3 жыл бұрын
Coool
@user-fi2mi3ir2m3 жыл бұрын
Very very nice
@williearkoncel96063 жыл бұрын
👍🏼👍🏼👍🏼
@riofernandoukurtapinem40222 жыл бұрын
Udah mirip kaya milkita mas sepedanya 😂😂
@CycleFields2 жыл бұрын
🤣🙏🙏💯💯
@andrewjust44802 жыл бұрын
Where did you get those decals?
@johnjosephdejesus81552 жыл бұрын
Pitik check bakal lodi goods
@cefnonn2 жыл бұрын
Nice work, but with all that rust, is the frame still rigid? Does it flex noticeably?
@cefnonn2 жыл бұрын
@@CycleFields My question is whether the frame is still strong. The rust would make me worry about its strength. I renovate old bikes as well. You did a beautiful job!
@cefnonn2 жыл бұрын
@@CycleFields Great work!
@acewilliams79172 жыл бұрын
@@cefnonn bikes are pretty resilient. This bike here will hold.
@melkerblomqvist74111 ай бұрын
@@cefnonn Got the exact same question. Have you find an answer about the strenght after rust removal?
@ibsbikeshopmartapura1372 жыл бұрын
awesome mantullllllllllllllllll 👌👌👌
@CycleFields2 жыл бұрын
Terimakasih Mas
@fahmighazali24772 жыл бұрын
Where do you buy the components
@andrewjust44802 жыл бұрын
Did you restore the rims or buy new ones?
@jjmohan90542 жыл бұрын
New one's
@alexkin32043 жыл бұрын
Четкая работа...
@TheColin592 жыл бұрын
Beautiful bike but I'm not sure about the bar tape 🤔
@kmproductions97943 жыл бұрын
he removed the seatpost that easy hmm not convinced
@vineee2910 Жыл бұрын
Easy? Dude had to use a hammer to make it out 😂
@kmproductions9794 Жыл бұрын
@@vineee2910 man you need a fucking tractor to take that thing out.
@rohmattulloh3405 Жыл бұрын
Keren
@CycleFields Жыл бұрын
Thanks kang
@proks4523 жыл бұрын
Gana ng classic frame lalo na nung na restore pwedi pang fixgear
@maumau64522 жыл бұрын
Sarap panoorin tnx po
@adrianrodriguez34423 жыл бұрын
Tan oxidada no estaba si pudo sacar el tubo del sillín y la horquilla con tanta facilidad. Más bien era suciedad.
@andrewjust44802 жыл бұрын
I am restoring an old Nishiki bike. Is there any way you could print me the same decals?
@steinbockimjanuar56972 жыл бұрын
Top👍👍👍👍👍
@ben14609 Жыл бұрын
what does a bike like that cost?
@CycleFields Жыл бұрын
Around 200
@nawawibinharun48522 жыл бұрын
rd nya bisa di pake buat 9 speed ngga?
@nawawibinharun48522 жыл бұрын
@@CycleFields oh gitu ya. hehee saya kpengen pake sproket 9 speed soal nya,tapi punya nya rd 7 speed kaya gitu. makasih banyak info nya🙏
@bob-ny6kn3 жыл бұрын
You brazed the bottom bracket with brass? Good luck not dying.
@bob-ny6kn3 жыл бұрын
@@CycleFields I see. Good skill to have.
@fahmighazali24772 жыл бұрын
What is the size of the wheel
@ujsusahajasasticker47583 жыл бұрын
Perkiraan abis berapa bang, kebetulan punya bahan juga nih brand TASHAN😬
@ujsusahajasasticker47583 жыл бұрын
@@CycleFields gaskeunnn ig nya apa bang?
@31.8mm2 жыл бұрын
kalau part2 yg stuck sperti itu pake nyoba lepas pake blow torch worth it g om?
@CycleFields2 жыл бұрын
Sangat worth it mas. Saya mau beli belum sempet2. Selalu andelin tukang las deket rumah. Panas itu merontokan karat jd gosong. Caranya panasin 1 mnit, lalu segera celup ke air, atau diguyur. Nnt karatny jadi abu gosong item.
@31.8mm2 жыл бұрын
@@CycleFields ooo gt y, thx om
@zeichen953 жыл бұрын
Good job!
@MotoLuHa2 жыл бұрын
Sei un artista
@CycleFields2 жыл бұрын
Thanks
@billd6565 Жыл бұрын
Hand-press in a headset? 😬
@noelaja84262 жыл бұрын
Rodanya rims berapa itu ms? Tks
@CycleFields2 жыл бұрын
700c mas
@hastacivil2 жыл бұрын
Jebul e wong solo to Mas? Tak kiro channel luar negeri 🤣
@CycleFields2 жыл бұрын
Hahahah iyo mas
@perraccca3 жыл бұрын
👏👏👏👏👏👏👏👏🚴
@zoriontsu58613 жыл бұрын
Ban ukuran brp??
@model40022 жыл бұрын
но я вижу не правильно закрепить цепь....
@mesotahna2 жыл бұрын
Plus: securing critical joints with solder touch-up Minus: inefficient methods of cleanup and rust removal, paint straight on rust. Also cheapest possible components, and is that the old bent up dropbar just painted??
@urielcarmona49272 жыл бұрын
Me gustó el diseño pero le faltó lijado compadre!! Va bien pero podrías ser más perfeccionista en algunas cosas!
@bmxscape2 жыл бұрын
is it really worth the cost with all the new parts?
@CycleFields2 жыл бұрын
Yeah, the bike already sold 😄👍
@bmxscape2 жыл бұрын
@@CycleFields where do you get the parts? i am looking to restore an old bicycle but the vintage parts are so expensive
@bmxscape2 жыл бұрын
p.s. very good work
@CycleFields2 жыл бұрын
I get from local store near by. 🙏👍👍
@YourSoundPath2 жыл бұрын
It seems to be not the same fork. The original has slightly another angle. Nevertheless great job!
@CycleFields2 жыл бұрын
Yes the original fork is bend, i switch with better one.
@adamnovina21392 жыл бұрын
The only thing i dislike is bottle nest, too modern. I'd like to have chromed cage instead 😉 but great anyways 👍
@CycleFields2 жыл бұрын
Thanks 🙏💯💯❤❤
@tgc2813 жыл бұрын
bike is ready for another 50 years
@enbiciable3 жыл бұрын
Cambiaste la potencia esa no es la original apesar de que la sacaste completa la cambiaste x otra
@deangarlitz5587 Жыл бұрын
Nice job. I do have a suggestion though.When you wrap the handle bars, you are starting from the wrong end. If you start the wrap from where you have the black tape, and wrap the other way, the plug in the end of the handle bars will keep the wrap from coming loose. No need for black tape then. kzfaq.info/get/bejne/adh6nqWJuN7amGw.html
@CycleFields Жыл бұрын
Thanks 🤩👍👍👍👍👍👍
@simonbughadze99962 жыл бұрын
If you have puller, it would be more easier to pull out left crank.
@CycleFields2 жыл бұрын
Thanks man
@simonbughadze99962 жыл бұрын
@@CycleFields I didn't expect this, your work is just amazing.
@hl2dus12 жыл бұрын
He removed seatpost easilly.. hmm... i cannot belieave that..
@maqu00763 жыл бұрын
Really cool. May I know the bar tape brand? I love the pattern so much
@johnfitzgerald11922 жыл бұрын
13:15
@im_brown2311 ай бұрын
Ban nya ukuran berapa mas?
@CycleFields11 ай бұрын
Kalo ndak salah 27 1 1/4 om
@im_brown2311 ай бұрын
Makasih mas
@altairlucio33752 жыл бұрын
🤔👍🇧🇷
@spinoza69873 жыл бұрын
Not bad... you could have done more on sanding. But its ok
@l.d.t.63273 жыл бұрын
Putting Nagasawa stickers on a non-Nagasawa bike is a big no-no.
@l.d.t.63273 жыл бұрын
@@CycleFields fair enough. My personal opinion: never resticker a bike to a brand that it's not. There are many fake bikes out there, and many buyers are deceived when buying fake items. If you want a Nagasawa, pay for one. If you can't afford it, be happy with whatever brand is on the bike. I've had Colnago Masters, Pinarello Montello and Merckx Corsa, and I've seen too many bike frames with Colnago on the down tube while it's clear they don't have any pantographics proving it's a real Colnago. Ps: you did a good job restoring.