Install Quick Connect Fuel Line Fittings AND Vacuum Line Fittings

No video

Install Quick Connect Fuel Line Fittings AND Vacuum Line Fittings

Рет қаралды 130,547

Жыл бұрын

How to install quick connect fuel line fittings and quick connect vacuum line fittings to plastic fuel and vacuum line. Enabling YOU to make new fuel line or new vacuum line.
👉 How to clean fuel injectors yourself: • 🛁 How to Clean fuel In...
☕ Support the channel here: www.buymeacoffee.com/CycloneCyd ☕
💡 Subscribe and hit that bell 🔔 to learn more about looking after your car.
kzfaq.info/love/-C_1iVg...
Quick connector disconnection pliers
WW 🌍 s.click.aliexpress.com/e/_DCo... 🔴seriously, it’s not worth breaking pipe & connectors for the sake of a £10 tool
Laser 6933 Pipe Connector Insertion Tool
UK 🇬🇧 amzn.to/3wrBHkk
USA 🇺🇸 amzn.to/3R0eaAq
Other pipe connection insertion tools
WW 🌍 s.click.aliexpress.com/e/_DmQ...
WW 🌍 s.click.aliexpress.com/e/_DBi... 👍this one would be my choice of tool
Caulking guns
UK 🇬🇧 amzn.to/3XCa2cg medium to heavy duty
USA 🇺🇸 amzn.to/3wr3KQQ medium to heavy duty
WW 🌍 s.click.aliexpress.com/e/_DcR... plastic, but looks better than mine❗
WW 🌍 s.click.aliexpress.com/e/_Dl4... cheap & cheerful, same as in the video
Pipe flaring kits
UK 🇬🇧 amzn.to/3R6hvhs
USA 🇺🇸 amzn.to/3Dbwvoo
WW 🌍 s.click.aliexpress.com/e/_DEQ...
Nylon PA-11 & PA-12 fuel & vacuum pipe
WW 🌍 s.click.aliexpress.com/e/_DFX... 👉per metre, many sizes & great value
WW 🌍 s.click.aliexpress.com/e/_DBJ... fewer sizes
Various ID6 fittings as used in the video
WW 🌍 s.click.aliexpress.com/e/_Dde... one-way air & vacuum check valve
WW 🌍 s.click.aliexpress.com/e/_DFH... 90-degree connector suitable for brake boosters
WW 🌍 s.click.aliexpress.com/e/_Deb... 45, 90 & 180 degree 7.89 ID6 connectors
WW 🌍 s.click.aliexpress.com/e/_DCD... 7.89 ID6 T type coupler (as used on Saab 9-3 vacuum pump)
More connectors:
WW 🌍 s.click.aliexpress.com/e/_DDu... 7.89 ID6 F type couplers
WW 🌍 s.click.aliexpress.com/e/_Dk6... Straight connector perfect for repairs in 7.89 ID6 and 9.89 ID8
Need other fittings or sizes❓ Follow the connector links above and on the item page, use the ‘products’ pull-down (above the pictures near the top left) to search the suppliers' store.
Are you trying to grow your own KZfaq channel? I use TubeBuddy, try it out for FREE:
www.Tubebuddy.com/CycloneCyd
Gear I use in filming and production:
bit.ly/CC_Gear
My videos are edited with Filmora X - try it for free
bit.ly/Filmora_X_try4free
Thank you
How to install quick connect fuel line fittings, quick connect vacuum line fittings, how to make a new fuel line, new vacuum line, make a new fuel line, vacuum line fittings, make a new vacuum line, plastic fuel and vacuum line, repair a fuel line, repair a vacuum line, repair damaged fuel or vacuum lines, expensive manufacturer spare parts, quick connect fuel and vacuum fittings, repair a damaged fuel line, fuel line repair tool, installing fuel line connectors

Пікірлер: 108

@CycloneCyd Жыл бұрын

👉 How to clean fuel injectors yourself: kzfaq.info/get/bejne/bth4oLFjpqnDnZ8.html

@simonuddin8493 Жыл бұрын

Thank you for your video and sub’d! I am a bit stuck as I do not have full access to the end of my line on my Kangoo unless I drop the tank. So after a few attempts, the end of my line has become a bit squished? Also, is a different coupler required for a return line? My pump has two joints; a green and a red.

@CycloneCyd Жыл бұрын

@@simonuddin8493 on some cars there is a hatch under the rear seat for access to the fuel pump. Have you checked for one? Where you must drop the tank (the Saab is like this) it is usually easy enough, but run the fuel as low as possible. The different colours are probably for identification. What matters is the fitting size. be sure to measure the spigot and the pipe properly to get the size required.

@kred2770 5 ай бұрын

At first, I laughed about your method. After 30 mins of hustling, I'm doing exactly what you were showing and got it working lol. Thank you!

@V8SKULLS 4 ай бұрын

Sir I wanted to Say Thank You, you really showed me how to do this with ease, I would like to give you a tip of the hat. Bless you and hello from the U.S.A, Florida.

@neopolitics Ай бұрын

extra fun when the line is on the car still!

@oldmanhads2043 Ай бұрын

@@neopolitics im about to do this tomorrow, hoping my pipe tool arrives by then, with my fuel lines all still in the car. Fingers crossed 😃

@wheels-n-tires1846 Жыл бұрын

Update: armed with your method, I found quick and easy success last night!!! The caulking gun worked great!!! The only small snag was the Ford lines I was working on have a rubbery outer coating, making the OD a bit larger, and the flaring clamp chewed that up a tad, but that's really a non- issue. So thanks again for the great info!!!

@CycloneCyd Жыл бұрын

Awesome work. Thanks

@jrr7031 3 ай бұрын

This was great!! Straight to the point and no...uh "waffling" or "mucking about" as you guys say. I would give more than 2 thumbs up if I could.

@KingfisherAbuGarcia 2 ай бұрын

ikr

@troy3456789 Жыл бұрын

This is applicable to many different motor vehicles. I had no idea how to replace those without going to the dealership and paying through the nose.

@CycloneCyd Жыл бұрын

Absolutely. That's why I said the Saab vacuum line is the example piece. The technique and parts are exactly the same to build any vaccum or fuel line for any vehicle. Especially useful if you have a classic or other rare motor.

@troy3456789 Жыл бұрын

@@CycloneCyd Your videos are gold, because you are knowledgable enough of to know how to explain it simply, slowly and clearly (for the dummies out there like me)

@stevencoen9604 Жыл бұрын

These fittings have drove me crazy. Not anymore thanks to you. Absolutely amazing video. 👏

@MrSpeedy99 Ай бұрын

Cyclone Cyd, I’ve used so many of your videos to help me carry out car repair work. Thank you!

@lonewolf9738 Жыл бұрын

thank you sir..i made a tool out of an old caulking tool to push the fittings into place,,but had a problem pushing an elbow fitting into place until i saw your idea using a socket..i then had the job done in 2 seconds. your knowledge is very much appreciated by many

@CycloneCyd Жыл бұрын

Glad it helped. A friend in Powertrain told me about using the pipe holder from a flaring kit, but the socket idea was all mine. So I'm chuffed for you. It's all about thinking outside the box 👍

@outdoorswithunclesergey6293 11 ай бұрын

Thanks for the great video. Your advice helped me a lot 🙂

@pricepaid 7 ай бұрын

Amazing video! Been wrenching for years and always used heat to get these on, tried this method today and wish I had learned this method years ago… well done!

@lmeisteruk Жыл бұрын

Another top notch video thanks for making these. I've recently bought a 9-3 SS aero and found your amazing channel helping me sort the niggles. Very grateful thanks. This fuel line video will be so useful for my other Saab 9-3 OG where I need to upgrade the fuel pump but wanted to use this type of OEM pipe instead of rubber and clips other people use. I had looked into it previously but your video doesn't require the crazy expensive tools 👏👏👏. Great work 👍.

@wheels-n-tires1846 Жыл бұрын

Great tips!!! Been a professional mech for decades, but came across a new problem in having to replace the fittings on a fuel line at the pump. I never had to do this before and just knew it was going to be a pain. But armed with the flaring tool and caulking gun trick, Im feeling much more confident about how my day is going to go!!!

@CycloneCyd Жыл бұрын

How did it go?

@CyberBrySkyNet 7 ай бұрын

How do you get these connecting hose apart again?

@1996turbocamaro 11 ай бұрын

Hey thanks so much for this video - this process worked GREAT - I can't thank you enough !!!

@SmoothBrain23 Жыл бұрын

you're a great instructor, thank you for sharing your time and knowledge with us all. I sure do appreciate you making this video, I was using my hands to remove the quick fittings that were attached to an extremely rusted fuel pump. the rust was so bad it prevented the plastic tabs from being pressed to remove. pulling with my hands was difficult but i managed to remove both and was wondering how i was going to push the new fittings into the plastic fuel lines while still in the vehicle. thank you thank you thank you

@donv6039 10 ай бұрын

Thanks for the DIY tips on this. My son bottomed out his HHR on a gravel road and the steel line heaved up into and cracked the quick connect on the poly line that goes to the fuel rail. I might try just replacing the quick connect for $5 vs paying $70 for the complete steel line kit just to get the short poly flexible end line. And I had just replaced both the fuel and vapor steel lines last year after the old ones rusted up. You may have saved me $75 w/ shpg. Thanks from a yank across the pond! 🙂🇺🇸

@daytrading9731 Жыл бұрын

M8 you are so amazing. Thank you so much for taking the time to make these videos. I always learn some new.

@CycloneCyd Жыл бұрын

Glad you like them! Your appreciation is appreciated 😂😂👍

@steveroxx69 Жыл бұрын

That was an awesome way to press them two pieces together thank you for the tip take care

@Thejoker-zg1gk Жыл бұрын

Absolutely awesome video man looking forward to seeing the next instalment 👌🏻😜

@CycloneCyd Жыл бұрын

Glad you like it. What else would you like to see or know?

@Thejoker-zg1gk Жыл бұрын

@@CycloneCyd did you ever do that video of fitting your upgrade intercooler 👍🏻

@chrisstramacchia6780 Жыл бұрын

The best video yet for these repairs!!!!

@mrobles661 Жыл бұрын

excellent walk through! Cheers from the US

@daves4026 Жыл бұрын

Nice video. I had to replace a BMW 730d windshield washer line which burst in the cold snap in Jan. Stealers wanted me to buy a full BMW rail as they didn’t sell the connector separately. I googled the code written on the part turns out BMW use connectors used by the VAG group so VW AND SKODA have the same parts. So popped into the local VW dealer who kindly gave me the part. My trick is to use a couple of seconds of the small butane soldering heat gun. Works a treat the pipe goes supple barb slips on then firms up. Would not do that for the outer o ring type connectors though

@lukascervenka6346 Жыл бұрын

Thank you, great video. Yesterday I have been naively trying just to heat the pipe and put connector in, but results were terrible. Now I tried your "cold press method" and the fuel line looks like it was stock!

@lw6866 Жыл бұрын

Legend for this. Thank you.

@PaulJohnson-lu3mj Жыл бұрын

Brilliant video Syd, has to be your best yet! Thanks😊

@CycloneCyd Жыл бұрын

Wow, thank you! BTW, that reply about a prize was NOT me. Some kind of spam

@throbinwood9911 Жыл бұрын

good video… very informative but strait to the point. I wasn’t sure how to recreate the bends in my turbo vacuum lines. Thanks for the tips.

@CycloneCyd Жыл бұрын

You're welcome!

@NewmanAutomotive 11 ай бұрын

Very useful, thank you. You can also make this much easier by using a heat gun on the end of the pipe prior to pushing onto the fitting. Easier method to create bends as well rather than the kettle, but you need to be reasonably skilled with the gun to avoid overheating/melting.

@KingfisherAbuGarcia 2 ай бұрын

Hey this was super useful! The trick with the caulking/grease gun was very clever indeed. 👍But instead of the flaring tool, I just bolted two 4 cm wide strips of wood together, drilled a 7,5 mm hole in the center (for 8 mm nylon lines), loosened the bolts to place the line in between, retightened and attached it to the bottom of the caulking gun (the one you mentioned at 5:20) with two screws. I was fitting a 9,49/8,0 mm 90 degree connector and I put a few LEGO strips under the connector to support it, a drop of ATF to lube the connector, and it slid on beautifully! First I tried a steam cleaner to make the hose more malleable but the hose just collapsed at the base.

@rastaman7260 Ай бұрын

Wow how amazing this video is I'm sure glad you made this video it helped me out big time. Thanks Sir.

@cecilveley5722 Жыл бұрын

Thanks,,, didn’t know what I was going to do, it went right on with a little bit of a good push.

@CycloneCyd Жыл бұрын

👌👌👌👌

@1FACEFIRST 2 ай бұрын

Saved me with this little trick thank you!

@dominusganikus2928 Жыл бұрын

Great vidéo,thanks from France

@nicolascar7922 4 ай бұрын

Thanks for sharing your knowledge, regards from Chile

@karbanatek99 Жыл бұрын

Very good video, thank you!

@ghassanali8144 Жыл бұрын

Great video thanks for sharing this info

@kevin-zt4ix 9 ай бұрын

Great tips Brother Frackville Pennsylvania USA

@eliasfund8280 4 ай бұрын

Thanks a lot. You saved me ❤ beste Grüße aus Deutschland 🇩🇪

@KerbalSpaceCommand 11 ай бұрын

I had bought one of the tools to help press on the fittings, the stupid thing broke after a few uses, I still use the holders it came with. I didn't think about using sockets to hold the fittings, very nice idea. I would boil water and put the end of the hose in the water. Then I used the fitting holders, then I'm able to push the hose on with my hands. Some times I can get kinks in the hose but usually I don't.

@carolyntracytalbott5865 Жыл бұрын

This is what I do and have done it for over 20 years. Heat the hose or pipe with a heat gun and no grease or lube. You don't have to heat it up hot hot, practice with it a few times and you have it.

@oliverrojas3185 Жыл бұрын

Good props and instructions. This video did the job. Thanks.

@CycloneCyd Жыл бұрын

Thanks for stopping by. Happy to help. The pipe I was making in the video has been on my car since, working perfectly.

@oliverrojas3185 Жыл бұрын

Glad your pipe is holding out. Over here, in the USA, the fuel pump died. When replacing it I fractured a fuel line connector. Prior to replacing it, it was trickling out fuel each time I turned on the vehicle ignition.

@microfan9892 Жыл бұрын

Great video!

@deankay4434 Жыл бұрын

Great information provided by your video and especially the PTFE lube. Many don't read an owners manual or get one with a used car. If purchased at a professional dealers lot, ask them to buy one and mail it to you at no extra cost, part of the deal. (Tech Tip) If you live where it freezes (0 degrees centigrade / 32 degrees F) Use this silicone grease sparingly on the door weather strips. This does 2 things. 1 is it hydrates the rubber seal, making it last decades longer and when freezing, it allows an unlocked door to open as moisture, snow melt, frozen rain from sticking it so bad, you could break the door handle or scratch the paint where you use a large flat blade screw driver or a handy pry bar, even with a couple or rags. Nothing spells enjoyment as standing in freezing weather trying to pry open a door the is unlocked and using a third hand to hold the door handle. Fun I say, but it is called for in the owners manual. That fat book in the glove box taking up so much room! For a car guy in the USA. Have a lucky one. DK, automotive ASE Master Tech since 1978, retired.

@towarzyszbolo3677 11 ай бұрын

great help!

@peterlogan1623 22 күн бұрын

very good video thanks

@user-jw7td3wv2c Жыл бұрын

Thanks!!!

@luckyguy600 Жыл бұрын

great idea

@reggie1767 Жыл бұрын

Thanks you sir

@anthonywheeldon1181 2 ай бұрын

Excellent presentation..used the same method to make a new plastic petrol pipe for our Vectra C Hatch..only variations..? I mounted the flaring tool securely in a vice, insulating tape where the jaws clamped the pipe and used my wife's old hair dryer to "carefully warm up" the end of the pipe for a minute or two before pushing in the fitting home...after a couple of bad kinks cold...Thanks for the advice & sharing....

@gernotskupin8472 Жыл бұрын

Dankeschön !

@Brianbeesandbikes 4 ай бұрын

Very resourceful. Have you tried warming the tubing with a heat gun to soften / ease pushing on the fittings?

@chevysevery3461 28 күн бұрын

a heat gun/hair dryer will help press the fittings in or a boiling cup of water will make life easier.

@Simon-bu4kc Жыл бұрын

oy my... I randomly ended up on a video from 3 years ago dealing with the bad shifting on the Fiesta Mark 6 because I'm doing my clutch at the moment. checked out if the channel was still active and got this video recommended which is already my next little project for the old Fiesta in sight. apart from the soothing UK accent which fits garage repairs perfectly in my opinion your explanations are all correct (as far as I've seen) and there's no shortcuts taken or botches made, just lovely, old fashioned mechanics work 👍🤩

@CycloneCyd Жыл бұрын

Thank you, I do try to be thorough and accurate. I also like to show how a high standard of workmanship is attainable by the DIYer. Sometimes it is the "little things" that make the difference - for example, see my latest video on spark plug replacement, where I doubt very much that any garage does anywhere near as good a job.

@kalijah87 Жыл бұрын

Great video..Nice job.. But..i made one of mine on a Citroen Saxo it fitted well but there is leak again

@jjward5561 Жыл бұрын

This was very helpful thank you. Several good ideas. A hair drier or boiling water can help soften these black nylon pipes and a hair drier wont get hot enough to melt them.

@mikeraphone6745 9 ай бұрын

Excellent. Perhaps you could cut some wood to support the angle bits and put that in the mastic gun or heat the pipe a little bit. I don't know as I've never done this . I broke a clip under my car for fuel . It's lucky that is a rubber hose as i would be in the shit . Thanks

@vydasliudvinaitis482 5 ай бұрын

Hello. Nice tip. And what to do if one if the fittings is leaking a bit let say for vacuum line after this job. Is there any way to make it seal better? Without taking it apart again?

@johnwyman6126 6 ай бұрын

A bit of heat, from a clothing steamer, warming up the end of the tubing helps a lot.

@stanwardoshiro Жыл бұрын

Is it possible to use silicone vacuum lines to replace the plastic tubing (for the vacuum line you show above n this video)?

@szieee84 Жыл бұрын

Hi cloud You please tell me what pressure it will hold? I try fix fule lines in my Audi but unsuccessful, there is 4bar running in it just wonder if that will hold;) ?

@minidigger1000 Жыл бұрын

I have a?I have a 93 2ltr turbo 210bhp when quarter full if you floor it it nearly stalls if you drive normal it's OK or if there's plenty of fuel it's OK any ideas I'm at a loss

@RemyMartinVSOP Ай бұрын

For the vacuum lines only can you use 8mm silicone hose?

@DOLRED 8 ай бұрын

Since you brought the tea pot into the video I was under the impression one can heat the hose end in the same manner and insert those fittings into the heated end. Once the line cools the fitting is tight. Easier than fighting the job with a caulk gun. In using this method to do existing gasoline lines on the vehicle, keep in mind gasoline has a boiling point way less that of water. Hearing gasoline sizzle is not a pleasant sound, especially when your face is close up--like playing with a maddened cat. PS--you can momentarily dip the hose end into the water but I would not boil the water. It does not take much to heat the hose for the job.

@norris.7670 10 ай бұрын

👍👍

@branko917 2 ай бұрын

I have a faulty fuel line connector on fuel filter (o-ring broken). I cut out the connector from the nylon fuel tube and now have to to install another one. The problem is that I have to install connector on a fuel line which is already installed on a car (I cannot remove the whole fuel line). I planned to heat a fuel pipe with a heat blower (200 degC) and then put the connector on a pipe with hands because I do not have enough space to use any tool (fuel pipe is to short). Do you have any kind of suggestion and is it dangerous to manipulate with heath blower at 200 degC in close proximity of fuel tank.

@namenotshown9277 6 ай бұрын

where to buy online at good prices the connectors?

@GoatsThe Жыл бұрын

Can I just replace those plastic tubes with your silicone lines from aliexpress? Or does it have to be plastic again?

@slypig24 Жыл бұрын

Great information, thanks for sharing. Before I order fitting, is the diameter of the solid pipe that the coupling clicks onto, being either 6mm or 7mm or another size, used to order the correct size part? Or is it the inside diameter of the fuel line the determines the fitting size?

@CycloneCyd Жыл бұрын

Both! For example, 8mm-ID6 = fits to an 8mm pipe (eg a fuel filter) and fits to 6mm ID plastic pipe. There's a range of combinations of sizes for different applications.

@slypig24 Жыл бұрын

@@CycloneCyd thanks you.

@victorkaminski1747 Жыл бұрын

👍

@weihuagao5883 Жыл бұрын

What is the tool name used to hold the line, please.

@billymalpass2187 Жыл бұрын

For the 06 saab 9-3 what size pipe do I need for the vacuum and fuel lines

@CycloneCyd Жыл бұрын

I linked to some in the description. IIRC it's 8x1

@billymalpass2187 Жыл бұрын

@Cyclone Cyd thank you sir love your channel

@DougSims Жыл бұрын

This video is about 2 weeks too late for me. I broke that exact hose you were holding. However, I found a full replacement for $35. Is it possible to remove a broken barb from these hoses?

@CycloneCyd Жыл бұрын

Split the pipe with a sharp knife

@DougSims Жыл бұрын

@@CycloneCyd I guess I should have specified "non-destructively" on the pipe. The check valve was broken inside the pipe, so I was trying to repair the pipe without destroying it.

@CycloneCyd Жыл бұрын

@@DougSims ah, right oh. You will have to cut the pipe slightly shorter, you'll never get that broken barb out. If the car is a few years old, there's a good chance the pipe and fittings have lost their 'flexibility' so fitting a new valve might actually be impossible. So you'd be better off making a new pipe from scratch.

@Troy_Built Жыл бұрын

I use hot water to dip the pipe in.

@MrOikono Жыл бұрын

First !

@CycloneCyd Жыл бұрын

last

@youeweu Жыл бұрын

@@CycloneCyd Not so fast ☝🏼

@jasonfrenette7403 11 ай бұрын

You're playing chess. I'm over here playing checkers. The flaring tool and caulk gun for fitting fuel lines in genius! I've always used a heat gun and crumpled a lot of line by getting it to hot/ pushing to hard. The world doesn't deserve you.

@seifixnetwork4663 9 күн бұрын

Thanks good Sir, these car producers should be banned in the market. They make something and don't sell spare parts so we need to modify ourselves My car is KIA Cerato koupe spare parts are hard to find😢

@BPantherPink Жыл бұрын

Great chnl... Liked n subbd !!

@harvestblades Жыл бұрын

I've heard about the caulk gun tip which sure is better than using a clamp or vice, but the socket is something a lot of folks wouldn't think about. Great instructional, & a much better way than heating the hose. Also using a motor oil will also work to lube the fitting.

@CycloneCyd Жыл бұрын

If you use heat, you need to control the temperature closely. Dipping the end in boiled water can do this, but any kind of heat gun risks over heating the material and ending up with a poor joint.