Good detailed yet understandable explanation. Thanks for the effort. This is about $1500 Kanuck bucks if you can find one in Soviet Kanuckistan.

Good Luck at Lynx Brutality. Can't wait to see what everyone brings this year.

No, most rifles are not MOA tack drivers. But, neither are the shooters. Thanks!

That's a pretty nifty new toy you've got there, it looks very cool.

Seen on social media on the bent bolt handle. Definitely would be reminiscent of the P14/M1917 way of things. On the American side of things, this rifle would be a bit of a hard sell since if they want a .223 bolt gun in this configuration, chassis systems for the Mossberg MVP and the Ruger American exist. And the Trail is pricier than either of those rifles, especially if it doesn't have the precision rifle accuracy. It would be interesting to see a head-to-head with the Trail and either the American or the MVP, though I do think that the Trail might beat them in terms of cycle time for multiple reasons. Still, I do like the concept of this rifle. I sure hope CZ listens and improves this system plus offering it at a better price.

Good review, possibly worth mentioning the MLOK is set up for short magpul MLOK standard (the short screws not the long screws, you can buy bags of these from magpul and their distributors). I have the magpul picatinny bipod mounted upfront, nice, light and compact. In terms of groupings, as always it partly ammunition dependent, but I do agree with your broader comment in regard to sub-moa rifles. Any thing is possible with three round groupings but it changes with 30 round groupings. I have found with the 20 inch 1:9 twist version of this, the maximum PBR to be ~250 yds (4 in) or 330 yds (8 in), best general use zero is 33 yds (30m).

Nice looking rifle, and a really clever bolt! Re the stocknlength: Instead of faffing with para cord and stuff, why not either shorten the rear ends of the bars (this might require not locking cuts for the collapsed position) or make new slots at the riggt length (if it's not too close to the current intermediate position)? Either should be easy on the Chap's milling machine.

Thanks for an interesting review. Looks like a fun rifle, if a bit pricey. But still nice to see that CZ have not lost their flair for making appealing rifles. Their humble .22 rimfire hunting rifles always used to be the best first choice for great value entry level guns. Some more exotic German makers made even nicer sporters, if you could find one at a sensible price.

im pretty excited about the 600 MDT version

Excellent review, thank you. Have you tried the Hornady 52gr HPBT through it, funnily enough I get better groups through my Haenel CR223 with the above mentioned ammo. Talking Sub MOA with a Steiner 536 @ 100m. If CZ were to drop the price to a for mr more realistic price then I would get one, before I forget, do the GI 20rnd mags click in on an open bolt?, how much needs to be taken off the Pmags for them to function properly? As always, I had to watch this video twice 🤭🫣 so take two likes 👍 All ze best from DE from this expat 😁

I got the 600 Trail in 7.62x39. VERY discrete with Hornady Sub-X subsonic 255gr hunting loads and a can. Issues with the proprietary Bren 2 magazines. About half of them need to have the feed lips dressed down with a file. Not a big deal, but a bit unexpected considering how difficult the magazines were to acquire. The gun came with one hand-picked mag and I had to order extras from Chechia. Finally found them for a much better price in the US only to discover that many don't fit without some modification.

salty comment to feed the algorithm

Looking forward to your Lynx brutality vid. Would be cool to do something like it at Greene Rod and Gun Club in Greene NY.

It’s definitely a confused rifle. Skeleton stock, lightweight chassis, polymer everywhere-but a heavy sporter barrel? Seems like a fluted or carbon-jacketed barrel would fit the advertised use-case of the rifle.

If you find yourself looking for a new LPVO, have a look at the delta stryker 1-6. very bright red dot and extremely thin bezel. I think for this sort of application (compact, mostly freehand shooting but with some capability to push ranges) it's the best of the compromises.

Good to see I'm not the only who uses Crown Royal bags for various "bag needs".

🇦🇺😎👍I held one at Christmas and I didn’t like how the buttstock wobbled

Your Tikka Artic would be Sweet 👍

Nice thorough review. I was considering getting one in 300 blackout. My goal is to get a suppressor for whatever brand and model in 300 blackout. I was hoping the weight was a pound lighter.

I have a foreboding about that folding stock it will eventually bend or work loose, I would not like to take a tumble or trip on this platform especially running around an assault course. I do hope that I am wrong about this as travelling with all the paperwork and fuss would be a great disaster half way through a brutallaty match ,I can see a use for it getting in and out of a vehicle where space is a problem but I personally would like a nice solid one (if this gets a good work out i would like to see how it lasts )👍

One of those if we had unlimited slots on the FAC rifles at £1300 for me.

Only change I would make is have it in 308 and carbon fiber barrel etc get the weight down as much as possible basically a recce rifle

Nice! I’ve only seen .223 in the US. Have you seen the 7.62x39? I would like some short 7.62x39 mags for my Bren 2 but can’t find any this side of the pond

Thinking of this or schmessier ar15 for civilian service rifle at bisley, would appreciate your input😊all the best from sunny Troon (whatever the votive candles for I wish you sucess)

I like the rifle but I'm annoyed that it replaced the 527 instead of keeping it in production.

Good luck at lynx brutality. Will the utility crown royal bag make the trip?

Did you ever get into the products from Armalon UK? I'm not sure if they even trade anymore but they specialised in No 4 conversions and 700s. All mag fed in pistol and rifle calibres.

The bolt handle looks like a fairly simple part other than the multiple bends required for the shape you want to end up with... I think I'd be tempted to turn up a longer than necessary blank with the appropriate tapped hole in the bolt body end and figure out how to get each bend with a little jig and some heat... then cut it to the length you want and glue a suitable knob on after. I'm not sure why altering the receiver would be needed - surely it's possible to clear the receiver at the designed angle and then dogleg back for the position you want?

Seen one this year in at an hunting show, handles lovely and that stock triggers old G3 memories. When they told me that it is 1:7" on a Bren barrel blank, I was sold too. Set of flat folding iron sights, an can and my Scout/hunting rifle is done. No big bummer that only poly mags work - had to crush my mag collection back then to apace my retarded legislativ. Only kept the springs.... oh FDM😎

Another cpl of precision data points, 8 round group at 100m from bipod, 0.2 MIL (2cm) and 10 round group 0.25 MIL (2.5cm). So again both groups under 1MOA. Also reporting a total of 8 lite strikes, with two different types of ammunition.

Just saw the trigger weight bit, thank feck I watched this ,was only told last week by club captain to READ the rules,saved my bacon sir

Fight for cheese 😉 Hi bloke Canny wait to see what you can do with that Keep up the good excellent informative quality content bestest from Scotland 👍👍👍

Would love your thoughts on the Arisaka rifle family. They seem to have taken a lot of design cues from your beloved SMLE but with a different attitude towards the sights.

The bolt handle would be easy to just make a new one versus buying a replacement and modifying it.

In theory it looks like you could use a pistol stock like the Hera Arms CQR Stock with this? Or is the bolt gonna come back and hit it?

Another point the collapsible stock positions allow you to use different scopes and electro-optical devices with very different eye relief.

If it's not A semi it needs A full 20 inch barrel IMO, I'd also go 1/8 twist. I think an argument could be made for side charging forward on the left side.

Minor incident. Human error. Did someone try and send 300BLK down a 223 barrel per chance? 🤔 Looks like a nice setup. My old teammate back home has gotten himself one among some of his other brass and lead flingers. And a progressive reloading wotsit. Love watching them work. Also. Yes. That bolt is so greasy you have summoned groundskeeper Willie... 😅👍

Wondering what you think of Savage

The closest one I found costs a little over $1000. There's too many US brands that make bolt action rifles that use AR magazines that cost half of that or so. CZ makes good stuff, though. Best .22 bolt actions on the market.

Yup, get those self loading rifle shooters taught a lesson Mike!

Funny to hear someone saying C Zed instead of C Zee...😊 Wonder how the chaps at CZ Pronounce it..?

Great Video 💯💥💥💥💥💥💥💥

... Plastic ties (zip ties)!. You can get stong types these days/colours!.

The scope rail needs to go back further to accommodate an Acog or Elcan.

I’m very interested in getting a .223 for range fun I’ve been intrigued by both the CZ trail and the Schmeisser (straight pull) As an owner of both I wondered if you had an opinion? Context: a shooter who was just looking to have fun (not competitive)

Wish that someone would offer a pump action AR platform .

“There was an incident” bad that I know without looking that someone put a .300 BLK in a .223 and blew it up.

🇦🇺😎👍Great review mate 🏁

With these model specific collapsing stocks it seems companies put just enough engineering into them so they function and little else. Yet it is the USP of the rifle. Perhaps they would have been better with a folder?

BCL is making similar one for half the price called Bison

That would be great I'm 300 Bo!.

"... ans see how many semi-auto shooters I can shoo... I can beat." Jeez, Bloke, I didn't think you had that much malice towards us normie semi-auto users, lol!

Could the pistol grip be modified to have a QD sling point mounted/built into the upper right side?

Find.a local metal fabrication shop and ask them to make a new bolt handle tge is longer amd dog legged. It wont cost much.

A salty thumbs-up, as wrong as that might sound 😮

Interesting. Looking forward to seeing what you do to and do with the rifle. Umm, did you ever get your loose butt fixed? 😁

Was für ein PA scope verwendest du?

What about those Q offerings or is it just not very European friendly

Child safety lock firing pin😅😅😅

Ruger American, thrice the accuracy at a third of the cost. Mosberg too. Who knew looks increased price more than performance? I'm sorry, I just can't love a rifle doesn't shoot moa 90% of the time.

Kinda disappointing. I wish they would have more time on engineering it..

For a rifle that costs over 1000 Euros, this is a garbage rifle. You can buy a real rifle for this money. I think you like the form factor and struggle to find reasons to love it.

"large magazines" _laughs in EU country that has recently banned those_

I see this as a solution for a politically caused problem while we are giving all kinds of things to other nations . In America we kinda still have the second amendment in the non free zone’s of our country. Did you watch our president’s state of the union address? I don’t know where our country is going he is causing much division