I had a scorpion a few years ago and I foolishly sold it when I was tight on cash trying to get into other hobbies. Also being a fool, I let my CCW expire and then bought a new Scorpion a few days ago and get to pick it up tomorrow. Hope you don't mind but I love your build and will be trying to replicate it. Only problem for me is I do not have any 3D printing skills haha. Love the trigger you have on there. I will also be trying to get it SBR'd and suppressed in the future. Thanks for the video and hyped to see how well this looks. Subbed bro!
@dltz6 ай бұрын
Imitation is the highest form of flattey! I appreciate the kind words. As for the trigger, check out the HBI options - they also reduce overtravel in a similar way as the one I designed. Tandemkross has a cool trigger option as well that also includes pre-travel adjustment. Good luck with your build! Thanks for watching, commenting, and subscribing!
@ryanm55106 ай бұрын
@dltz do you happen to have the digital file of the mount you made for your light pressure pad? I have a buddy who has a printer that may be able to make it for me if you do not mind. Also, looking forward to any future content bro! Glad to see the 2a community out doing things
@dltz6 ай бұрын
@@ryanm5510Totally! Here is my grabcad page where I post all my models - information for each individual part is included with the model and there is a link to videos on each model: grabcad.com/dltz-1/models Here is a video where I go over all the models I have made: kzfaq.info/get/bejne/fdmTda6o0LXSY40.html
@ryanm55106 ай бұрын
@@dltz you are the absolute best! Thank you so much!
@jackwebb59179 ай бұрын
I just got a 3+ pistol and doing my e-form 1 tonight. This is an EXCELLENT and very well done video!
@dltz9 ай бұрын
Thanks so much! and congrats on your new scorpion!
@tippy123867 Жыл бұрын
One of the best Scorpion videos I have seen yet. Thanks.
@dltz Жыл бұрын
Thanks so much I really appreciate it!!
@Blamb.9527 күн бұрын
Glad you said you got it from cz parts. I was thinking the site was a scam. Just looks funky. But guess I'll give them a shot
@dltz27 күн бұрын
It looked a little suspect to me at first as well. I have ordered a lot of stuff from them at this point and have never had an issue getting it shipped to the US.
@CaliforniaHotBoyTV Жыл бұрын
you should sell that light switch mount! Looks factory and low profile! I'd def buy 1
@dltz Жыл бұрын
I appreciate that. I have thought of selling the parts I design and make for guns, but I do not know if I really want to go through the trouble of doing so. If you're looking for a pressure pad mount specific to the Streamlight I would recommend Shaffer Machining: www.shaffermachining.com/product-page/streamlight-pressure-switch-m-lok-mount There are way more options out there for the Surefire tape switches but I cannot justify the cost of the Surefire scout lights to myself. Thanks for watching!
@dltz Жыл бұрын
Finally decided to publish my designs. Here is a video with all the information and link to my grabCAD page: kzfaq.info/get/bejne/fdmTda6o0LXSY40.html
@aljones6254 Жыл бұрын
Just got one in OD green. LOVE IT!!!!
@dltz Жыл бұрын
Heck yeah! That color looks sick. My buddy just built one up in gray and it looks awesome too! The handguard I got comes in OD green and gray as well. And the YetiWurks grip comes in OD green too. Great way to improve ergos and keep the sick color! Thanks for watching and commenting!
@djjosha8 ай бұрын
Great looking build!
@dltz8 ай бұрын
Thanks sir, I appreciate it!
@mister-Dmitriev. Жыл бұрын
why didn’t KZfaq show me your channel in the recommendations before?! great review !!! subscribe!!! hello hello from Russia ✌️
@Trad6166 Жыл бұрын
Thanks for the video. I have been looking for a good light set up for mine. This helped me.
@dltz Жыл бұрын
Glad it helped! Thanks for watching!
@dltz Жыл бұрын
I had this light laying around so I ordered the arisaka mount for it. I was going to get the TLR rail mount 1. That would be a great option too. It attaches directly to picatinny rail.
@Nachtjagerz Жыл бұрын
Great video man! I love my CZ and you really gave me a lot of tips on how to upgrade it. Didn't knew HB had so many good stuff like the receiver pin. Goodbye pesky motion!
@dltz Жыл бұрын
Thank you! I am glad it was helpful. The scorpion has a huge amount of aftermarket support which is another reason it's such a great platform. Thanks for watching and commenting!
@codyjenn8785 Жыл бұрын
That is a sweet gun I'm going to be doing an AR9 build for sdi here pretty soon
@cityofbricks5 ай бұрын
Great video and awesome build. An inspiration :)
@communityprepper6153 Жыл бұрын
Nice build. This is my next firearm for sure. Also, for the first time, I'll be getting my NFA tax stamp for a suppressor specifically for this gun. Now, if I can only find them in stock ???!!!
@Hermes-yr4yi Жыл бұрын
love my scorpion, that supressor is fucking awesome and the sound it makes is great. definitely wanna get me one
@dltz Жыл бұрын
It's one of my favorite guns to shoot suppressed, especially with subsonic ammo! Its so much fun! Look into the 125% recoil spring from Ascalon Arms if you are going to shoot it suppressed a lot - I put out a video on that spring recently.
@travisbond635 Жыл бұрын
Good job brother. Looks great.
@Mr.J.Diesel Жыл бұрын
That’s a sweet rig!
@tnh723 Жыл бұрын
Subbed. Slick work!
@dltz Жыл бұрын
Thanks! I appreciate the subscription and comment buddy!
@ChristianGrest Жыл бұрын
New subscriber! Love my little CZ Scorpion. Did a video series on converting it to K length some years ago. Still haven't SBRd mine, but might do that in the next few months. Those Rugged Obsidians are awesome pistol caliber cans! Have a couple of them and run them on all my sub guns. Nice job on the 3D printed stuff...that's an itch I've yet to scratch, but so cool seeing what folks come up with. That trigger looks phenomenal. I installed the HBI springs and polished up my trigger. Same factory trigger shoe, but might swap it as some point. Nice job man!
@dltz Жыл бұрын
Thanks for your comment and subscribing! I really appreciate it. I have a lot of fun with my gun projects! I'm very pleased with how the 3D printed parts are holding up.
@Citizen2ACitizenLLC Жыл бұрын
Super sweet upgrades….. I may need to make some upgrades to mine. Waiting for my form4 to get approved. Thanks for sharing. Just sub’d
@dltz Жыл бұрын
Thanks! I appreciate it! The Scorpion is such a cool platform.
@Citizen2ACitizenLLC Жыл бұрын
@@dltz Yes it is.
@bryand432611 ай бұрын
Awesome video! Did you happen to post a stl or stp file of the switch mount you 3d printed on any of the open source websites? I have the same light and switch but just have it taped on at the moment. Would love to print a dedicated Mlok mount for it
@dltz11 ай бұрын
Chyea man I posted all my designs on GrabCAD. grabcad.com/dltz-1/models
@bryand432611 ай бұрын
Fantastic! Thank you@@dltz
@donlam5735 Жыл бұрын
I would buy the light switch holder from you. or "donate" to your development fund.
@dltz Жыл бұрын
Finally decided to publish my designs. Here is a video with all the information and link to my grabCAD page: kzfaq.info/get/bejne/fdmTda6o0LXSY40.html
@nusense8087 ай бұрын
How much are you in for this build? Looks great
@dltz7 ай бұрын
Including the $200 tax stamp I wanna say $2100-$2200. Cant quite remember it's been a while. It may be in a reply to another comment.
@billygoatct Жыл бұрын
Where does one get a suppressor for this gun?
@dltz Жыл бұрын
Any 9mm suppressor will do.
@kristhibodeaux9524 Жыл бұрын
do you have a link to the exact mount that you used for the light and whatever else in needed for install? thanks
@dltz Жыл бұрын
The link to the picatinny cable guides is in the description already. Here is the link to the M-Lok scout light mount I used: www.amazon.com/dp/B09RXTQWYQ?psc=1&ref=ppx_yo2ov_dt_b_product_details The pressure pad mount is my own design and I 3D printed it. Hope this helps and thanks for watching!
@MrPaolodacanay Жыл бұрын
Does the CZ Scorpion throw blowback on your face when using a suppressor? Is it fixable?
@dltz Жыл бұрын
It's a direct blow back 9mm. It's a bit gassy but not terrible. Not really anything you can do about it other than a flow thru suppressor rather than a baffle core design.
@ChrisCom. Жыл бұрын
ive been debating for weeks. get one of these and mod it out. or get an AR and mod that out. after looking at 556. ammo prices. the CZ is looking better and better. this will be my first rifle, lots of pistols but no rifles. suggestions ? ur CZ is badass
@dltz Жыл бұрын
If you do not have a rifle. Buy an AR-15. This is technically a "short barreled rifle," but really its a pistol you can fire from your shoulder. Its not very useful past 50 yards. Also, paying for the tax stamp is an extra 200 dollars. Buy an AR-15, the most common rifle in America, that shoots the most common caliber in America. For the price of this (including tax stamp it was $2200) you can build out a sick AR with great features and a nice optic. Remember - all rifles need a sling, optic, and white light minimum. Hope this helps... build an AR. The 16" carbine version of this would be a fine choice for a rifle except they are discontinued and you cannot find them anymore unless someone is selling a used one.
@ChrisCom. Жыл бұрын
@@dltz appreciate it brother. The range was a concern of mine. That just cleared that up. AR it is. Any suggestions on a decent reliable starter AR ?
@dltz Жыл бұрын
@@ChrisCom. I like to build my own ARs and I always start with Aero Precision - I really like their products. I have had good luck with Palmetto State Armory products as well. In terms of fully built ARs depending on price look into PSA, BCM, Daniel Defense, Ruger, Sig, IWI. It depends on if you want to buy one and run it, or modify it. If you're into building and modifying then maybe just start with a build - its pretty straight forward, lots of great videos out there, and also the AR15 is all mil-spec so the parts and components are all generally going to be compatible (don't forget to check head spacing though!!). If you think you might only change out a stock or a pistol grip then just buy a complete gun. Start with a 16" barrel gun - that way you don't have to worry about making it an SBR or pin and welding a muzzle device, you can put whatever muzzle device you want on it. Those are just my recommendations, I am by no means an expert on ARs, but I hope this helps!
@ChrisCom. Жыл бұрын
@@dltz appreciate it 🙏🏻 thanks brother
@brantleyspringmeyer2576 Жыл бұрын
which rugged suppressor is this. i have been looking into there products for my cz. Is the obsidian 9 gonna be quieter than the 45? im just getting into the suppressor world im trying to have my next suppressor not be a disappointment like my first and have it truly optimized for my cz any help is greatly appreciated..
@dltz Жыл бұрын
This is the Rugged Obsidian 45. I run it on 45 caliber pistols and my 9mms all the time. Its very modular so you can configure it however you want. I run 45 caliber boosters, 9mm boosters, 9mm direct thread, and 9mm 3 lug. I am very happy with it and have found solutions in the Rugged product line for every gun I want to run it on. I highly recommend it. As for the noise difference I feel it is negligible. My buddy has the Obsidian 9mm and if I put a 9mm front cap on mine (so the baffles are 45 cal, but the front of the suppressor where the bullet exits is 9mm) and I cannot tell a difference in noise with or without hearing protection. These suppressors are very well regarded and very popular and I feel it is for a good reason. In terms of putting it on a Scorpion, you can use 3 lug (requires a thread on muzzle device) or direct thread - either option would work great! I hope this helps, if you have anymore questions I can do my best to answer them here if you reply to this comment thread. Thanks for watching!
@brantleyspringmeyer2576 Жыл бұрын
@@dltz so you shoot it without ear pro it's that quiet? If so that's awsome
@dltz Жыл бұрын
@@brantleyspringmeyer2576 I almost never shoot without hearing protection. Depending on the 9mm round the bullet is still breaking the sound barrier and making a super sonic crack which is above the level of hearing safe. Always wear your PPE! Subsonic ammo in 9mm with this suppressor is hearing safe although I still generally wear hearing protection as extended exposure is not good.
@BWM4L Жыл бұрын
Is this gun discontinued? Or do they still make them and can still find them I haven’t been able to?
@dltz Жыл бұрын
I ordered this back in July 2022 when the 3+ started hitting the shelves. I specifically wanted this one due to the aftermarket support. I figured with the 3+ coming out the Evo 3 S1 pistol would be discontinued soon. It looks like its still available. The scorpion carbines have been discontinued. If you're in the US they are still available currently on Midway, Buds gun shop, and Palmetto state armory. Actually on sale with a rebate right now too.
@BWM4L Жыл бұрын
@@dltz bro you goated asf thanks so much! I’m bout to head out and go get one ordered homie frrrr 😂😂😂😂😂
@BWM4L Жыл бұрын
@@dltz which site got that sale ?
@dltz Жыл бұрын
@@BWM4L I think the best deal is on budsgunshop.com currently. about $850 with a rebate available.
@dltz Жыл бұрын
@@BWM4L My pleasure! Glad to help! You won't be disappointed with this gun its so much fun!
@jrnageotte Жыл бұрын
I need 16 inch barrel. Anyone have a take off?
@BaronOnlineCZ Жыл бұрын
Thanks a lot for the video. Great job 👍Have you published the STL file for the trigger somewhere? Thingiverse or Printables? Or can i buy this STL/3MF file from you? I was very impressed with your trigger. Greetings from Czech Republic 🙂
@dltz Жыл бұрын
Thanks for commenting! I appreciate the input! I have not published any of my designs. I'm a bit in a weird space with that. Part of me wants to make them available to anyone who wants them. Part of me wants to sell them as I have many designs for many guns (some are featured in other videos), while trying to remain anonymous as possible. What I would rather see happen is that others get inspired to take on some design work themselves and come up with their own solutions - especially with how accessible additive manufacturing is now. Short answer is No, I have not published my designs and I do not know if I will do that or sell them in the future. If something changes, the people who have commented on my videos asking about my designs will be notified. Thanks again!
@BaronOnlineCZ Жыл бұрын
@@dltz OK. All clear. Thank you for the explanation. I understand you. Well... I'm going to grab my caliper and go do something with it in Fusion360. Thanks for inspiration 🙂
@dltz Жыл бұрын
@@BaronOnlineCZ Excellent! I would love to see your design and what you come up with!
@dltz Жыл бұрын
Finally decided to publish my designs. Here is a video with all the information and link to my grabCAD page: kzfaq.info/get/bejne/fdmTda6o0LXSY40.html
@dirtygamer9986 Жыл бұрын
I studied self defense for many years, why am I limited on how I can defend myself?
@crashedking1931 Жыл бұрын
Looks like your eyes should be burning right about now. She's blowing powder smoke back in your face what a Ditz. I have that same but mine is a 16.2" barrel. When you shoot it un-suppressed how is it.
@dltz Жыл бұрын
My eyes were fine, thanks for your concern. I was outdoors, little bit of wind, and safety glasses on. I shot it a lot that day (and have since) with the suppressor on it and it never bothered me. Unsuppressed it's fine.
@secessionnow4133 Жыл бұрын
Nice setup. Would have been nice to get the total damage on your wallet for this build.Fock the atf. The NFA is unconstitutional. It doesn’t withstand text and tradition of this country
@dltz Жыл бұрын
Alright, I added up what I paid for all this stuff - $2200. Prices are currently higher than what I paid on most parts. I paid $950 for the gun. This cost includes the tax stamp, light, and optic. Hope this helps. Also ouchy! Spendy boy.
@CaliRaised_26 Жыл бұрын
Got to stop biting your nails bro,
@dltz Жыл бұрын
I've been waiting for a comment like this on my videos. Haha I know I'm an anxious fuck.