6:00 forget what "everyones" gonna do! guaranteed 90% haven't built their own box an 100% haven't put it out for the world to see! Keep putting in the work Sean! Respect!

I love your channel. I'm currently building a mini ramp in my backyard, it'll be finished in a few days. I've worked in construction for many years. Here's a tip when drilling steel. Get some oil they make a 3 in 1 or you can just use some motor oil. Just put a few dabs on your bit, or spot you're going to drill. Use more if needed. You'll save money on drill bits they'll last a long time. Peace!

That box came out so good! Good to see you shredding again too 🤘🏽

Good work! Shits hard if you don’t do it all the time. Small tip for building boxes - buy a sheet of Masonite that’s the same thickness as your angle iron then after everything you’ve done in this video (except paint) add the Masonite on the top and side so it’s butted up against the angle iron and it will sit flush. This way the top and side are just one flat surface with a metal corner instead of the angle iron sticking out. Doesn’t make a huge difference but a sheet of Masonite is super cheap and it’s a nice little touch. Also Masonite is smooth so you don’t have to paint it but may need to replace it once a year or so it it’s exposed to water

Dude i couldn't stop laughing when you said 'Everyone's gonna judge me.' Your build came out on point man.

Glad to see you skating again!

This ledge looks hella fun 🤗🤗 Classic Enuks DIY action 🔥🔥

that ledge is super cool my man, love the DIY 🤙

I did mine too, I learned that if you pre drill the holes the process of building it it’s much easier

One of the easiest, most useful things a skater can build. Almost a must if you haven't got a decent park nearby

Almost broke out in a domestic...listen to the boss my dude...happy wife happy life...😂 Tip from a carpenter, don't screw it so close to the edge you wanna screw it little more towards the middle A it will stop it from splitting And B if it goes in on the piss it won't matter as much Ether way awesome build dude!

this inspired me to make a box. Good shit man

Dig this build man! Loved the skateboarding as well.

Looks good, skates well - nice work!

Good job man. Great video.

I just made one, copied keen Ramp design a little just to make it lighter and easier to move around came out great.

the burning helps melt the wax into the steel. its key to making it slide better in the beginning.

I built this same box at the start of lock down! Also we’re skating the same Hockey deck right now haha

Good work brother.

I really dig this ledge, I'm going to try to make one similar. Just curious man, what happened to your eye?

Should do a piece on the box. Big nice blank canvas

Literally just went to bunnings and picked everything I needed and got it all cut. About to put it together. It cost $210 AU. Woooooooo!

glad the ankles better bro!!

keen on the diy vid later in the week bro

I can give ya some pointers to make life easier bro bro.. When your screwing the ramp together ya need a shorter bit and they also have some that hold the screw in place for you until you run it all the way in that make things really nice.. but you can also just get a circular saw that can take care of all your cuts and its a lil more universal then a miter saw

What kind of paint are you using?

DIY Grind Box Made Simple.....lol "This was a pain in the ass guys, ngl". Too funny. You did it thought so props. Even the pros fuck up.

i think butter benches are better saves your trucks, less harsh if you fall, more slide, doesn’t scuff as easy, no need to paint, and quiter.

Nice box, but Jesus Christ the fact that you didn’t end up in the hospital is the real win here. 🤣 keep skating, my dude.

the metal rail is like the most expensive part of these type builds.

lol, i'm rocking those exact same blue vans atm too.. bargain hunters!!!

shiiii mate the misso isn't bad on the old camera, very smooth hahah

Was you using wood drill bits to drill through steel.

i miss your quarantine skatepark build bro

🔥

If possible could you tell me the thickness of the angle iron and the top ply layer please? Love the tricks. The front tail was cool as fuck

Looking great Sean! Hows the healing of the ankle going?

I did not get the part that you burn the corner. Why is that for?

drill slower, use oil to prevent bits from snapping. Looks sick!

You’re accent is sooooo diferent btw sick vid

how much did the whole thing cost you ?

what was the price of all that?

Sick(edit: first)

How much $ was this

How many 2x4

How much did it cost?

take that bih apart and cut it down to 5/6 ft and put it back together. the beauty of DIY

😇💙🙏🏽💯

Just Made myself

Bruhhhh get a Milwaukee impact

dude u gotta guide the screw with ur fingers😭 i’m 15 and know that

do you not have to wear masks anymore in the us?

If You believe in Your Heart That Jesus died On The Cross And Rose again on The Third day and confess with your mouth that Jesus is Lord then you Will Be Saved

I love your channel. I'm currently building a mini ramp in my backyard, it'll be finished in a few days. I've worked in construction for many years. Here's a tip when drilling steel. Get some oil they make a 3 in 1 or you can just use some motor oil. Just put a few dabs on your bit, or spot you're going to drill. Use more if needed. You'll save money on drill bits they'll last a long time. Peace!