Рет қаралды 14,698
Tower BTS or tower signal has a long shape looming up.
We can look BTS tower around us. Tower Signal has unique shape, makes me think of making it. Not to make it in large form, but to make a miniature.
This video show you how to make it. every steps to make a miniature BTS tower Signal tower is easy but requires patience.
the steps to make BTS tower or Signal Tower
1. we will make four support poles. which is located between the two sides of the tower by using Senk. we cut this Zinc after we measure it
2. Cut back the zinc above. why we cut back because it's hard to make an angle of ninety degrees with a very small width. so we cut it with a knife
3.next. we make iron nets that will connect the four support poles earlier. I will chop it directly using a knife because the accuracy of using a knife is better for cutting
4.After all the material has been done. we will arrange the tower. the tower has sides that don't stand tall but are slightly tilted. as you can see on this video. so we have to shape it. we use glass as a base and glue to tie it. we also place a padding so that it has a tilt angle on the same two sides.
5.next side. its same way of the 4th steps. now we have to pieces than we arrange it again until the tower has connected by net in every side
6. the last steps we have to remove the glue from the body of tower signal
So that its guys for my today’s.
I hope you enjoy it. I need your corection and support coz this is very first video. And the next part i will make fondation, fance and the other. my be next week, so dont forget to kilik subscribe button bellow and dont forget to click on the ring button so you will not miss any notification when I upload a next part.