No video

Inventor - A Method for Cutting a Helical Groove on a Cylinder

  Рет қаралды 19,915

Team D3

Team D3

Күн бұрын

In this video Pete answers a question that was posed during a recent class on how to create a helical groove cut on the surface of a cylinder. There are a couple of interesting tricks to the process, so hopefully you find this useful.
#TeamD3 #D3InventorTips
For more information about this and other topics, check out our website www.TeamD3.com

Пікірлер: 5
@aasep7300
@aasep7300 2 жыл бұрын
thanks man, i need this helical cut technique for my final project in exchangers
@Team-D3
@Team-D3 Жыл бұрын
So glad the video was helpful for you!
@astonbradsmith3329
@astonbradsmith3329 10 ай бұрын
Hi, how do you get the face of the slot and helix to be flat (to follow the geometry of the tool used to cut it, ie end mill)
@selimguclu625
@selimguclu625 Жыл бұрын
First of all, thank you very much. But this is very confusing. Do you have any idea how i can sweep on a Cylindrical surface a bit easier. I want to rebuild something like this electrical Toe nail bits.
@Team-D3
@Team-D3 Жыл бұрын
@selimguclu625, good day and sorry for the delayed response. Can you send along a link or a specific manufacturer and product name, so I can see what type of drill bit you're referencing? More specific solutions can probably be presented then. However, if you look at using the COIL tool, that may be an easy method for trying to add a sweep to a cylindrical surface. Please give that a try and report back how it goes. We may be able to knock out a video on this topic. Hope this helps and have a most blessed day!
How to Sweep | Autodesk Inventor
9:34
Tech3D
Рет қаралды 107 М.
🩷🩵VS👿
00:38
ISSEI / いっせい
Рет қаралды 27 МЛН
Matching Picture Challenge with Alfredo Larin's family! 👍
00:37
BigSchool
Рет қаралды 45 МЛН
7 Days Stranded In A Cave
17:59
MrBeast
Рет қаралды 94 МЛН
InfraCouch Red Light panel assembling guide
1:52
VACUACTIVUS
Рет қаралды 1
Fusion 360 | Groove on cylinder (with parallel side walls)
10:13
Fusion 360 School
Рет қаралды 21 М.
Tutorial Inventor - 276 CYLINDRICAL CAM
24:43
Constantin Stancescu
Рет қаралды 4,1 М.
Spirale entlang eines Körpers Fusion 360 Deutsch CAD Tutorial
7:18
Learn to create a slot on a cylinder in  Fusion 360
3:39
CAD Jungle
Рет қаралды 7 М.
How to put a dome on a cylinder | Autodesk Inventor
5:08
Tech3D
Рет қаралды 37 М.
Pier CAD 3D - Corso base Inventor Pro (Video 11/1 Molla adattiva)
22:50
Corso base Inventor Professional Pierangelo Russo
Рет қаралды 10 М.
how to make toroidal coil / Inductor  - fusion 360 tutorial
5:53
Autodesk inventor  - Part 2 Membuat SCREW (Alat Penggiling)
6:35
Prayoga Design
Рет қаралды 29 М.