Click the link to watch dozer working on this project kzfaq.info/get/bejne/p7CllJSG1Lybp4E.html

One worker operating the grader, 4 drones and no traffic control Nice!

A master truck driver would drive at a low speed with the tailgate open and tray upright and evenly distribute the rocks like a boss with less need for a grader.

Thanks for showing us how NOT to grade out a new roadway. The trucks should be dumped closer to the roadway. So that the piles slightly overlap the previous work. Then the road grader should work on the high side. Using the already finished roadway as a referance. Use the angle of the blade to catch more, push, or slide off the work material as needed. Once you establish your grade. It's easy to maintain it. Work the grader up and then down the road. Cutting and grading enough so you don't have material bleed from the end of your blade. Doing it this way, you will not only achieve the proper grade on first cut. But the surface will be compacted and the tires of the grader will not sink into the material. You could also have a vibratory roller working next to you. Saving a lot of time. IUOE Local 15 (38 years) Retired.

I guess the truck drivers only know how to dump their loads and not how to spread gravel.

This was done 2 months, 29 days, 23 hours, and 40 minutes faster than the same job would have taken in Michigan. It's good to not have government and unions slowing down progress!

Safety? No problem. Gotta love the guy unlocking the tailgates, 2-way traffic, etc. The good ol' days of road construction. But we have a drone!

Wow, every time I see these machines, I'm blown away by their capabilities!

To all the safety and “here’s what’s wrong with how they’re doing this job” comments. This is how a big part of the world gets by, for better or for worse, but overall the job gets done. So take a deep breath and appreciate the fact that in developing countries, they’re learning and getting it done.

Drivers being tolerant, so nice to see they dont need hundreds of people with stop signs.

Great video! It brought out all of the has been and wanna be’s commenters. There is a vicious unity in attacking what someone else is doing their way and not your way. . The video never raises any method controversies. But the comment army has shown all of these crafts their supposed errors. I am sure this film was just to show a road crew doing their jobs. I enjoyed watching this work

Thanks for showing us the slow and wrong way to grade.

I could list quite a few problems with how this is being done. As a 25 year veteran in construction, there are a LOT of things being done wrong. Doing an import job like this where you're hauling in whatever materials to be spread out, you do it as if you're painting the road. The trucks need to spread the loads out better. Meaning when they dump, they should pull forward slowly and not allow it to be in such a big pile. Where I'm from, you should be using belly dumps for this. The truck pulls alongside the existing windrow and begins his dump, then the next truck ties on, and so on. All the blade has to do is carry the windrow across at the same grade until the ribbon is completed. Then do the same thing until you get completely across the fill. This is definitely a lesson in how NOT to build a road.

Motor Graders are a good leveling and grading tool. There is, however, a variation on the asphalt layer that can do this job far more efficiently. It can lay a roadbed foundation or sub-roadbed filler very quickly and more efficiently than even a Motor Grader can. They have been using such a machine for laying highways in my local area for the past several years. Very efficient, and grades the material to be placed as it travels, requires many more dump trucks than seen in this video in order to operate smoothly.

12 yrs in road building and after watching this i may blow my brains out...WTF

Don't criticize. 8 months ago, before they finally got a grader, there were 124 kelings out there with British army surplus shovels.

If they would only not dump the gravel in one big pile! It would make grading it soooo much easier.

Painful to watch, but that's part of what makes it good I guess, nobody knows what they're doing but they are doing it anyway

Probably a stupid question, but why not have the truck drivers pull up while dumping so you don't have the huge piles to chop down before you can start smoothing it out?

kzfaq.info/get/bejne/asikbKmG3b_SnWQ.html (part1)

Sign in UK "Due for completion Summer 2025" Sign in India "Due for completion 4:30pm"

im sitting here stoned watching this. what a day i had

I'm surprised how many professional grader operators there are in the comments

I always here comments about a blade operator being Really Good! Folks who never operated one just don't realize that they a built for the work! So being impressed so easily, is like being amazed that a Horse.. can Run!

I love how the cars and trucks and motorcycles all keep on going with the grader working and there is no flag personS around! Talk about managed chaos! I wish north america construction / traffic flow was like this! (yes, need to drive slow around construction sites!)

My first reaction was that this operation should have been using a spreader box not a motor grader to reduce segregation of the ABC. But by the end of the video I was impressed at how well the base course looked. The only issue I have now is the loose thickness of the layer (well over 5") and whether they will be able to obtain optimum moisture and density on the roadway, critical for a durable substrate on which the pavement will be constructed.

Why not spread with the dump trucks?

Motor grader is the hardest piece of construction equipment to operate.

And no-one had safety boots on !!! And where are the rollers ?? Here the unions would have declared that job black !! Greetings from Australia

a good tipper driver would run a 200mm layer straight out whilst constantly tipping by keeping the backdoor nearly shut and secured with chains.

If this was New Zealand there’d be a million cones and the traffic would be backed up in both directions by stop/go control and a 30kph speed limit. And it would take a month to do what these guys have done in an afternoon.

What a bunch of cowboys, no traffic control, no obvious plan, no idea................................................

Dudes working in flip flops. 😂😂😂😂😂 At least he’s not scamming our elderly

Skill?? No.. more like lack of equipment.. just getting it done. Anyone that has ran a grader knows you can't raise the blade as fast as the machine will fall. So that means it's the wrong tool for the job. A scraper would make short work of that. That's the tool that should be used.

Maybe if the truck drivers tail gating the gravel instead of dumping it all at once you will get the road surfaced sooner and less grading from the grader

And not an Engineer or Traffic Controller or any signs in sight. Just how the job can / should be done! Excellent Operator.

i’m certain that this was one of the most painful things i’ve ever watched.

Waot! You forgot to spray the penetrationg primer before you dumped the asphalt, now it all has to come up.

Developing world road laying in action, i wonder how many of them wore sandals.

That’s how they pave roads in Mexico! Seen it hundreds of times !

Not bad, but not good either. First, it's a motor grader not a dozer so take that stupid mold board off the push block so you can see what your tires are about to drive on. Secondly, the first pass was a wasted pass, and on the wrong side of the piles to boot. Crab out and get those front tires on flat ground. Pull a finish windrow on to your existing base course first. It will be the last thing you bring across. Next, use the full mold board. The second pass he was toed in, but his heal was in the air; nothing good comes of that. Honestly, too much wrong to cover. I'm not trying to be mean, if you want to survive on the blade you have to do better than this

the best part is no traffic controllers. They expect the public to figure it out on their own.

If the guys tipping were better at their job, the grader wouldn't have to do so much work. I was a truck driver on road construction and we would have got our arse kicked for tipping like that.

The dump truck drivers are clueless. That contractor is wasting huge amounts of fuel and labor, not to mention wear and tear on the equipment.

Last 2 minutes of the video, "operator" was like: oh yeah, this thing has a blade on the front.

min. 11:55 What the hell..!?? four drones..!??

Seems to me the trucks could have spread out the gravel and made a lot more efficient use of grader.

Op is liking every comment no matter what it says

Why would you dump them in big piles? What a waste when they could have spread the material out almost at finish grade.

Bulldozers after the dump trucks, Graders are the finishing passes...

Where are you folks getting all of this beautiful gravel? Could we see the rock crushing plant sometime please?

Everyone’s talking about how they’re doing it wrong and are using the wrong equipment without proper safety like they aren’t literally in India

Beacons off but at least there are yellow streamers

Would have saved half the time with a spreader while the tippers don't just dump in piles.

Очень много лишних движений, слой подготовки не вообразим очень толстый, так что новечек мог бы так,

I was watching this vid on drones when a Grader interrupted the shot...

Why wasn't this job done at night when the traffic is less?

If you have a good motor grader operator, and you want to keep that operator, you don’t do this to them.

Kontruksi jalan yang sangat Top...

I mean if you only have 1 machine and 1 guy I guess, but this looks much harder than it should have ever been.

10000 mas makinas d todo ekipo para umentar. El trabajo asi pico bonito la ceiva hondura sero

with that many drones in the air you need a air traffic control tower, and now I understand why there are so many construction videos in my feed, everyone is trying to get on that band wagon :(

Профессионала сразу видно, дилетант там бы уже сдался. А тут дядька с мозгами, чисто на механике, без GPS Trimble, знает что делает. Глазомер у него в порядке.

РАША!!! Вот так нужно строить дороги а не заниматься воровством государственных денег!!!Дорожных воров к ответу!!!

I started watching the drones and forgot all about the grader for a few minutes

Operator is okey

They should use a bottom dump clam trailer lays a windrow done. Lot quicker less grader work needed

That's the best equipment u have to build a highway with?

Exelente buena encamada y exelente alineación

good job🎉

Park however, drive wherever, run in flip flops, not to mention the subject of the video. My anxiety is totally fine. Thanks.

Way too many passes that machine is capable of doing it in half that time

You gotta love some other countries way to do things....... no speed zone, no safety people.....

Sure looks like he’s got it on float! That mouldboard moves up and down pretty fast between the piles. He can drive it, but not so good at operating it lol

I see it but don't believe it. Heavy mobile equipment operator for 55 years, mining and construction ex army engineer.

Not very efficient at all. A blade is a geometrical marvel, learn how to use it’s angles rather than straight blading 3 times in your same wheel tracks.

Chain each side on the tailgate they could run the gravel out then save time with the grader to

I am surprised those trucks carry that much of gravel. That must be near 30 tons.

ធ្វើនៅខេត្តណាដែរនឹង

I wonder if they even have safety concerns or meetings... Traffic control.. Don't need it Safety clothes for workers.. Nah they can just dodge the traffic.

If a bathroom trip is absolutely necessary, use your hat or shoe.

People driving on an active construction site with no one directing traffic, 5 low flying drones, no PPE, equipment used partially correctly, must be India.

Instead of standing with shovels, now they have drone control box to hold

Trucks can spread a loads in layers not piles as well

Un travaille de professionnels.

It's not very efficient having the lorries tip the stones in large piles close together, it would be better to be moving forward when tipping so as to spread the load as you will see done in other videos on here.

In NJ USA the entire road would have been closed while traffic is a nightmare I kinda like this way but the drivers here would be cutting everyone off lol

No PPE. No boots. People just driving thru the grade like it's open...sheesh.

Seen very similar methods in Thailand with no traffic control either. You just drive through the roadworks and dodge the construction traffic.

I like how they have the traffic on the working side of the road and not the finished side. Don't want to be too safe

Modern heavy equipment

Would go faster an more accurate if trucks spread it out while dumping

Where I am the traffic authorities would shit themselves seeing something like this: zero traffic management, not a single high viz, random people flying drones running around in flip-flops on construction site, and even the dog is there! 😄 Here in NZ we get 1200 orange cones laid out on the road on Friday, before anything even looks to start on Wednesday next week let alone have any actual work done 😆

This must be anew style, it’s 2022 you think they would have a better way of doing this 😮

i hope the person who owns that machine isnt watching this video, it's a Grader not a Bulldozer.

I need to get me some of those safety sandals.

Painful to watch!! The grader guy knew what he was doing ! But the rest were rubbish! Too many flip flops!!! And they made hard work for the grader operator! Spread the loads out for him ! Tip truck and move forward as doing it , ! Painful watching

Wonder why they're paving the road? Woggies would just as soon as drive down any side they want, ignore the brake pedal, and go thru half the fields available before their wheel falls off.

OHH EMM GEE!!! What are we, 12 year-old school girls!

So I guess dump trucks cant drive and dump at the same time???