Dancing lights || LED chaser circuit with 32 cool effects || Arduino Project

Рет қаралды 91,786

Жыл бұрын

Hey friends,
Today I am going to show you how to make an LED chaser circuit. This circuit creates a dancing light effect by making 14 Nos. of LED bulbs glow in different patterns. There is a total of 32 cool patterns programmed in this code. This circuit is done using Arduino UNO board.
Components used & purchase links:
1. Arduino Uno Board : amzn.to/3RPzXw8
2. 9V battery with connector : amzn.to/3L8Opfe
3. Rocker Switch : amzn.to/4eOuCiO
4. Red, Green & Blue LED Lights: amzn.to/3RPv7iA
5. 220 ohm resistor
6. Male to male jumper wires : amzn.to/3xG4FB0
Link to download Arduino code:
drive.google.com/file/d/1vWGv...
OR
www.mediafire.com/file/x2cp3w...
You can download the circuit diagram from the following link..
drive.google.com/file/d/1c7us...
Please do watch the video .Thank you...
Please share the video if you like it.
❤❤❤~~PLEASE SUBSCRIBE TO THE CHANNEL TO SEE MORE SUCH INTERESTING VIDEOS & MAKE LEARING SCIENCE FUN~~❤❤❤
#arduino #ledchaser #dancinglights #diy #scienceproject #diyforkids #electronics #arduinoproject #projectforkids

Пікірлер: 131

@rengganisotofashionpekanba4933 8 ай бұрын

Can you do it with the speed button and pattern change button manually?

@henriebillz785 3 ай бұрын

Can you please adjust the code and add a switch to start the whole process when it is pressed and a buzzer for a Christmas song to sing alongside the LEDs please :)

@tsotne.gvajaia 11 ай бұрын

This is INSANE. WOOW

@Science_4U_ 11 ай бұрын

Thank you friend..🙂🥰

@nargissultana5366 Ай бұрын

❤❤❤Love for this project ❤

@Science_4U_ Ай бұрын

Thank you so much dear friend..❤️🥰

@nargissultana5366 Ай бұрын

@@Science_4U_ We are waiting for watching new updates from you Hope soon you will update.

@Science_4U_ Ай бұрын

@nargissultana5366 Yes..sure friend. I will try to regularly update channel with new interesting videos..🥰❤️🙂

@anjalikaranathunga Ай бұрын

cool.thank you

@Science_4U_ Ай бұрын

Okay friend. Glad that you liked the video...🥰🥰😔❤️

@Jenkinsoup 2 сағат бұрын

Good video! Just wondering how you were able to add only one resistor in the circuit instead of having one resistor per LED?

@Science_4U_ Сағат бұрын

@Jenkinsoup Hi friend. Thank you!!!. Having a single resistor for all LED bulbs is the proper way to do. That ensures same current through all LED bulbs irrespective of the number of LED bulbs lit up together at an instant, and so same brightness. But, the way I did is an easier way to do. But the drawback is that the total current remain same in the circuit. So if more number of led bulbs lit up together, the current passing throufh individual LEDs will be lower and hence their individual brightness will be lower. This is the difference.

@Jenkinsoup Сағат бұрын

@@Science_4U_ Thank you! I just bought some starting Arduino components and excited to try out your code!

@Science_4U_ Сағат бұрын

@Jenkinsoup Okay friend. Sure!!!. Whish you an interesting experience trying out these projects..

@TempleGuitars 5 ай бұрын

Is it possible to select just one pattern, so every time the circuit is switched on, it only produces that pattern?

@Sujal_davda 9 күн бұрын

maybe you can use break function

@Science_4U_ 9 күн бұрын

@Sujal_davda yes..that is correct friend. You can use a break function inside each for loop..use a push button switch and if the output of switch is high, it should break and exit to the next loop for next pattern.

@user-jj4bj5xp7z 8 ай бұрын

Do I need to do any changes in code if I replace blue leds with white ? If yes please explain the changes in detail

@Science_4U_ 8 ай бұрын

Hi friend..There is absolutely no change required in the code. You can use it as such..

@user-jj4bj5xp7z 8 ай бұрын

Thank you 🙂

@VinKrishSolutions Жыл бұрын

Super😊👌👌

@Science_4U_ Жыл бұрын

Thank you.🥰☺️

@williamkakooza4603 Ай бұрын

Thank you

@Science_4U_ Ай бұрын

You are most welcome friend..❤️🙂

@VidyaSagar_VSIASsagar 2 ай бұрын

This is good project for me Iam a student i won 1st prize for this project

@Science_4U_ 2 ай бұрын

Wow!! That is great friend. I am very very glad that this project got first prize. Thank you dear friend..🙂🥰❤️

@VidyaSagar_VSIASsagar Ай бұрын

Your welcome sir❤😊😊

@sharifulislam6387 11 ай бұрын

Is i use this program on my Arduino nano?pls reply.

@Science_4U_ 11 ай бұрын

Yes friend. Surely it will work..👍

@Producciones_Y_Sonido_Rojas 10 ай бұрын

Se puede hacer con cualquier tipo de LEDs? Soy estudiante

@Science_4U_ 10 ай бұрын

Si amigo, claro. Se puede utilizar cualquier tipo de LED y funcionará. Pero no se puede utilizar un LED grande que consuma más de 40 miliamperios porque arduino sólo puede proporcionar esa cantidad de corriente.

@AasthaShah18 2 ай бұрын

Which cable did you used for connecting the arduino to your laptop?!

@Science_4U_ 2 ай бұрын

Hi friend. It is called a USB A B cable..or USB A to USB B cable

@Science_4U_ 2 ай бұрын

USB 2.0 Cable - A-Male to B-Male for Personal Computer, Printer - 16 Feet amzn.in/d/0pW14LR

@AasthaShah18 2 ай бұрын

Okay, thankyou so much !

@Euclid75039 9 ай бұрын

Insane 🔥

@Science_4U_ 9 ай бұрын

Thanks a lot dear friend...💓🙂

@naseemaharoon165 Ай бұрын

Sir my LED are working but it is very very low voltage didn't see at cleared in the code need to give little more voltage what can i do

@Science_4U_ Ай бұрын

I think you used a higher value of resistor. You have to use 220 ohm resistor only. Otherwise you can remove the resistor also and work for short amount of time. This gives maximum brightness, but can damage the LED bulb if used for a long time.

@HaroonSidheeqpp Ай бұрын

Ok sir

@ashrefashref-pu3wj Ай бұрын

i dont have the little conecture what i do

@Science_4U_ Ай бұрын

Hi friend, which connector are you talking about?. Is it the breadboard where are the LED bulbs are inserted?

@user-jd2vn9jh8e 2 ай бұрын

Where the battery negative is connected?

@Science_4U_ 2 ай бұрын

Hi friend. We are powering all the LED bulbs from the Arduino Uno. Hence, only the arduino needs to be powered by battery. The +ve terminal of battery is connected to Vin pin of Arduino and -ve terminal of battery is connected to GND pin of Arduino, which is next to the Vin pin.

@teclem8156 7 ай бұрын

no se necesitan resistencias?

@Science_4U_ 7 ай бұрын

Hola amigo. He conectado una única resistencia común de 220 ohmios a todos los terminales negativos de la bombilla LED. En realidad, es mejor tener una resistencia separada de 220 ohmios conectada al terminal positivo de todas las bombillas LED. Pero también funcionará una resistencia común conectada a todos los terminales negativos de las bombillas LED, como he hecho yo en este vídeo.

@user-eq7ld5ep5f Ай бұрын

If i use only 10 led it will work or not need any changes in code please reply sir🙏

@Science_4U_ Ай бұрын

No need to change the code friend. It will definitely work..👍

@user-du4eu2by5i 9 ай бұрын

what library should i use in this?

@Science_4U_ 9 ай бұрын

Hi friend..There is no need to install any library for this code to work.

@CharlieLines-vg6lg 19 күн бұрын

can someone please copy the code and paste it here because i cant open both linkss by the wayyy this is niceee

@Science_4U_ 19 күн бұрын

Hi friend. I am glad that you liked the video!!! I am not sure why you are not able to open both the links. It is a lengthy code. I tried pasting it here. But only a portion of the code is getting pasted here due to character limitation. Can you give your email id? . I will send the code directly.

@robitasalingay3851 2 ай бұрын

How long the life of bulb or how many hours the life of bulb?

@Science_4U_ 2 ай бұрын

The bulb will last for many hours friend. I have not tested. I think it will definitely last for more than 1000 hours. You have to use the resistor correctly to limit the current through the led bul. Without resistor, the life of led bulb will come down due to overcurrent through the led bulb.

@harsharupasinghe2808 10 ай бұрын

How use speed control (preset) ?

@Science_4U_ 10 ай бұрын

Hi friend. You can control the speed of the lights blinking ON and OFF by modifying the code. In the code you can see that under each pattern there is a constant called "int t=80". This constant 't' gives the milliseconds time delay between bulb switching ON and OFF. You can increase or decrease this value for changing the speed 🙂

@GinoongJam 2 ай бұрын

Can i have the circuit diagram for School purposes only??

@Science_4U_ 2 ай бұрын

Yes friend. Sure..I will have to make it. I will make and give..🙂

@GinoongJam 2 ай бұрын

Thankyou

@Science_4U_ 2 ай бұрын

Hi friend. I have made the circuit diagram and uploaded in google drive. You can download the circuit diagram from the following link.. drive.google.com/file/d/1c7uszyi6nFekKmwLrnPhwfEXu0zOIZkk/view?usp=sharing

@ammukutty311 5 ай бұрын

What are the things used in this

@Science_4U_ 5 ай бұрын

Hi friend. the following is the list of things used in this project. Components used: 1. Arduino Uno Board 2. 9V battery 3. Rocker Switch 4. Red, Green & Blue LED Lights 5. 220 ohm resistor 6. Male to male jumper wires

@evpa71 9 ай бұрын

hey can i put the led + to anything of digital inputs?

@Science_4U_ 9 ай бұрын

Hi friend. Sure..you can put the LED + to any of the digital inputs. There are a total of 14 digital input pins ( number 0 to 13 ) which serve as digital output pins also. You can connect led + to any of these pins. Only thing to note is that pin no. 13 has a built in resistor, so you can connect any led to this pin directly without any resistor in series. But for all other pins 0 to 12, you NEED to connect around 220 ohm resistor to the led in series, otherwise the led bulb will get burnt out due to over current..

@Stagmike 9 ай бұрын

@@Science_4U_Okey I asked because I have a funduino mega with a lot of dig. Ins

@arfeensayed5360 6 ай бұрын

Can i pls get the circuit diagram

@Science_4U_ 2 ай бұрын

@bhavanas4451 7 ай бұрын

How to get schematic diagram of this

@Science_4U_ 7 ай бұрын

Hi friend. I will have to make the schematic diagram..I will make and give. Meanwhile you can try making this by watching the video. I am showing step by step in the video..

@ashlygalang274 5 ай бұрын

up for schematic diagram

@kentmodanza535 10 ай бұрын

code please i cannot download

@Science_4U_ 10 ай бұрын

Can you try downloading the code from the following link? www.mediafire.com/file/x2cp3wutuq6tk2b/led_design.ino/file

@user-eq7ld5ep5f Ай бұрын

You do a video that how to make a obstacle avoiding robot i try to make it my father spend lot of money for it but myrobot didn't work i become very sad my father also that money was waste what can i do. Please please help me sir 🙏🙏😭😔😪😪

@Science_4U_ Ай бұрын

Hi friend. Dont worry at all. I will help you to make it work. If the sensor is faulty, I cannot solve it. If it is not working due to some other reason, I can help you to make it work. What is the problem?

@Suchu5677 10 ай бұрын

mine dint work iam trying again

@Science_4U_ 10 ай бұрын

Ooh..it should have worked friend. It is a very simple project only. Was the code uploaded properly without any error?

@Science_4U_ 10 ай бұрын

Also check polarity of the LED bulb. The longer leg should be connected to +ve numbered pin from arduino.

@realkkram 7 ай бұрын

all void loop was error

@Science_4U_ 7 ай бұрын

There is no error in the code friend. You can try compiling code in a different PC..

@humairashahzad9948 5 ай бұрын

dancing is far behind the fact that our lights with this circuit is not working

@Science_4U_ 5 ай бұрын

Hi friend. What is the problem that you are facing. All these are tested and working projects. There could be some problem in the connection or uploading the code..

@MANTRA-ph9vb 2 ай бұрын

please send me it's project code

@Science_4U_ 2 ай бұрын

Hi friend. The code can be downloaded from the following links. drive.google.com/file/d/1vWGvjQk_IybSjnmG_Pz_0kc6FJelecik/view?usp=share_link OR www.mediafire.com/file/x2cp3wutuq6tk2b/led_design.ino/file

@TurakaLakshman-yo1it 7 ай бұрын

hiii sir can you send this codee...

@Science_4U_ 7 ай бұрын

Hi dear friend..The code can be downloaded from the google drive link given in the description box below the video. .

@ashlygalang274 5 ай бұрын

can i use more led in this?

@Science_4U_ 5 ай бұрын

Hi friend. It is difficult to use more number of LEDs since I have already used all the pins in the arduin uno by connecting LED bulbs. However, if you want to use more number of LEDs, you can use arduino mega, which has more number of pins than arduino uno..

@TempleGuitars 5 ай бұрын

Is the process of using the Arduino mega the same as this? @@Science_4U_

@samiqra1538 4 ай бұрын

@@Science_4U_ can i use shift register for more led's as same coding or need modification. Let me know what kind of modification

@ashlygalang274 4 ай бұрын

Will it work if I just connect the LEDs in series? @@Science_4U_

@Science_4U_ 4 ай бұрын

Yes friend. Arduino mega has more number of output pins.So you can connect more number of LED to it..

@jayashriingle50 Ай бұрын

Where is the link

@Science_4U_ Ай бұрын

Link to download Arduino code: drive.google.com/file/d/1vWGvjQk_IybSjnmG_Pz_0kc6FJelecik/view?usp=share_link OR www.mediafire.com/file/x2cp3wutuq6tk2b/led_design.ino/file

@Science_4U_ Ай бұрын

You can download the circuit diagram from the following link.. drive.google.com/file/d/1c7uszyi6nFekKmwLrnPhwfEXu0zOIZkk/view?usp=sharing

@miya_asil Жыл бұрын

Code pls

@Science_4U_ Жыл бұрын

Hi friend, the google drive link to download the code is given in the description. I will post the link here also. drive.google.com/file/d/1vWGvjQk_IybSjnmG_Pz_0kc6FJelecik/view?usp=share_link

@sarahellsworth7196 Жыл бұрын

You need a separate 220 ohm resistor for every led. This is poor circuit design and can damage your Uno

@Science_4U_ Жыл бұрын

Yes..you are absolutely correct. I have done this for simplicity only.

@Science_4U_ Жыл бұрын

If we have a separate 220 ohm resistor, equal current will flow through each LED irrespective of the number of LEDs lit up during each cycle, leading to uniform brightness accross all bulbs..

@Science_4U_ Жыл бұрын

In my circuit, the total current will be same in each cycle as it is a commom resistor for all LEDs and hence if two LEDs light up together, the current through each LED will be half and hence the brightness keeps on varying depending on the number of LED bulbs lit up simultaneously..

@Science_4U_ Жыл бұрын

This is the difference I can see. But I can't figure out why it can damage the UNO board. Is it because the current through each digital pin dynamically varies during each cycle depending on the number of LEDs lit up together? Can you please explain?

@Abyssalism 10 ай бұрын

I think no damage , each pin can support arround 40mA current, near the limit when only one is connected. You used 9V external battery so current is (9/220) A. 41mA without leakage account.

@ModelSceneryTutorials 11 ай бұрын

The code is incomplete. there are only 15 patters in the code that is available to download. Please put up the entire code.

@Science_4U_ 11 ай бұрын

Hi friend. What you told is correct. In the code only 16 numbered patters are there. But inside each pattern also, there are multiples patterns. If you see, in pattern 1 all LEDs ON can considered as one pattern and all LEDs OFF can be considered as another pattern. Thus, there are more than 16 patterns in the code.

@goodentrainment918 11 ай бұрын

Os this 5mm led ?

@Science_4U_ 11 ай бұрын

Yes friend. I have used 5 mm led bulbs only..

@goodentrainment918 11 ай бұрын

@@Science_4U_ brother i have a problem with Arduino nano the microcontroller start hitting when i start my circuit.pls tell me how i solve the hiting issu.

@goodentrainment918 11 ай бұрын

@@Science_4U_ i was not use any resistor in my circuit.

@Science_4U_ 11 ай бұрын

@@goodentrainment918 hitting or heating friend?

@goodentrainment918 11 ай бұрын

@@Science_4U_ hitting

@brentsuico5301 10 ай бұрын

send code pls link not working

@Science_4U_ 10 ай бұрын

Hi friend. Are both the google drive and mediafire links given in the description box, for downloading the code, not working? Please try downloading the code from the following links.. drive.google.com/file/d/1vWGvjQk_IybSjnmG_Pz_0kc6FJelecik/view?usp=sharing OR www.mediafire.com/file/x2cp3wutuq6tk2b/led_design.ino/file