Dynamic vs. Conventional Milling - DATRON Tech Talk | EP 03
Рет қаралды 2,612
Күн бұрынWelcome to our next video of our DATRON Tech Talk series!
What exciting topics can you look forward to in today's video?
Today, our technologist Marc looks at the difference between dynamic and conventional milling.
The following tools were used for the application:
- Tool 01: Ø8mm 4-1 Single Flute End Mill (0068808K) // Rpm: 34.000 1/min // Feed: 8000 mm/min // ap: 16mm // ae: 0.6mm
- Tool 02: Ø8mm 4-1 Single Flute End Mill (0068808K) // Rpm: 34.000 1/min // Feed: 8000 mm/min // ap: 1mm // ae: 8mm
What do you think about today's topics and which topics should we talk about in future videos? Let us know in the comments! And don't forget to SUBSCRIBE, so you don't miss any other video! There are coming more, so stay tuned!
***************
► LINKS
Tool:
webshop.datron.de/industrie-f... (DACH customers)
Milling Tools Catalogue: datron.de/de_de/links/mediadownload/download-fraeswerkzeuge
Page: www.datron.de
Shop: webshop.datron.de (only for DACH customers)
► SOCIALS
Facebook: www.datron.de/facebook
LinkedIn: www.datron.de/linkedin
Instagram: www.datron.de/instagram
@callmeasuka5849 2 жыл бұрын
Starting at 4:49 an endmill with inserts would be the better choice for conventional milling and may be able to go faster
@marcreis487 2 жыл бұрын
When you look at bigger pockets / radii, that´s right. Mostly you gonna use end mills for such features. And of course.....we wanted it to be a fair game between the two strategies, so same parameters ;-)
Practical Machinist
Рет қаралды 20 М.
DIY Zoonomaly Zookeepers Kinder Joy | PaperCraft Ideas #shorts #papercraft #toys #art #diy #unboxing
learning song
Рет қаралды 8 МЛН
Skitsville
Рет қаралды 16 МЛН
TheSoul Music Jam
Рет қаралды 23 МЛН
Action C Mini
Рет қаралды 79 МЛН
Kennametal Inc. - OFFICIAL
Рет қаралды 352 М.
MaviGadget
Рет қаралды 10 МЛН