Dauntless - Kartonmodell -

No video

Dauntless - Kartonmodell -

Рет қаралды 33,075

8 жыл бұрын

Hier zeige ich euch den Bau eines Kartonmodells vom Stürzbomber Douglas SBD-3 Dauntless.
Das Modell hat inklusive der Schablonenteile fast 1.700 Bauteile. Viele davon sind im Kockpit verbaut, welches dadurch sehr detailiert ist.
Zu kaufen gibt es das Modell zum Beispiel hier: www.kartonmode...
Here I show you the construction of a paper model of the crash bomber Douglas SBD-3 Dauntless.
The model, including the template parts, has almost 1,700 components. Many of them are built into the cockpit, which makes them very detailed.
You can buy the model here, for example: www.kartonmode...

Пікірлер: 64

@alexanderk7776 Жыл бұрын

so ziemlich die beste Arbeit die ich bis jetzt gesehen habe.👍

@models-by-fadda59 Жыл бұрын

Vielen Dank. 🤜

@thercchannel7301 3 жыл бұрын

Respekt dass du das durchgezogen hast!!! Mir wär schon bei der Kabine genug!!

@models-by-fadda59 3 жыл бұрын

Danke sehr. Das geht auch nur, wenn man viel Zeit hat und dazwischen immer mal wieder andere Modelle baut. Sonst fehlt bei der Dauer des bastelns das Erfolgserlebnis.

@thercchannel7301 3 жыл бұрын

Das stimmt. Aber der Bausatz ist ja echt geisteskrank detalliert.👍

@models-by-fadda59 3 жыл бұрын

@@thercchannel7301 Da gebe ich dir recht. Wenn das Modell so in der Vitrine steht, sieht man von wirklich sehr vielen Teilen nichts mehr. Aber das wissen wir Standmodellbauer ja.

@Drawingmaster_im 3 жыл бұрын

That looked super difficult but you rocked it! Amazing job!!:)

@models-by-fadda59 3 жыл бұрын

Thank you ArtyCrafts. The model has a lot of parts and very good graphics. It makes it look so real. However, it is quite difficult to build.

@models-by-fadda59 2 жыл бұрын

Thank you.

@user-pv3mu6ow7v Жыл бұрын

Модель супер ,у halinski military model всі моделі тяжко робити 1-33 розробка дуже копійна ,👍🏻👍🏻👍🏻👍🏻😀🥇🥂

@models-by-fadda59 Жыл бұрын

Ви праві, моделі складні, але дуже гарні та прості у створенні.

@ianthorpe3864 5 ай бұрын

Thanks this was a real help in building mine

@models-by-fadda59 5 ай бұрын

You're welcome.

@ernaniribeirodafonsecagarc4135 2 жыл бұрын

Guten Morgen, Kumpel. Ich habe Ihr Dauntles-Modell geliebt, ich weiß, dass es schwierig auszuführen ist, aber das hat Sie nicht davon abgehalten, großartige Arbeit beim Zusammenbau zu leisten, herzlichen Glückwunsch. Dieses Modell ist historisch, genau wie der Stuka. Eine Flotte von ihnen reichte aus, um die Seeschlacht von Midway zu gewinnen. Ironischerweise maßen die Amerikaner diesem Modell damals nicht den nötigen Wert bei und dachten, die Torpedoboote würden ausreichen, um die japanische Flotte zu versenken. Aber es war ein Fiasko und die Dauntlees retteten den Tag.

@models-by-fadda59 2 жыл бұрын

Hallo und vielen Dank für das Lob und die Aufklärung. Sehr interessant.👏

@ernaniribeirodafonsecagarc4135 2 жыл бұрын

@@models-by-fadda59 Dauntless , yeah.

@steamer2010 3 жыл бұрын

Very nice building, precise and accurate. Greetings from Russia.

@garybrounstein7725 4 жыл бұрын

How did you cut out the paper parts? Razor? Computer? The part cuts are smooth & precise. Almost impossible for human hands. Can you help? Gary

@models-by-fadda59 4 жыл бұрын

Hi Gary I only use a steel ruler, a punch for small holes and sometimes a circle cutter for bigger holes but no machines. This is all manual work with a precision knife.

@sheetmetalairplane 2 жыл бұрын

Sehr schönes Modell ich werde diese Modell irgendwann aus Blech nachbauen

@models-by-fadda59 2 жыл бұрын

Stimmt, das ist ein tolles Flugzeug. Dieser Bausatz könnte ja als Muster für die Blechvariante dienen.

@mpetersen6 2 жыл бұрын

👍👍

@marcossousa1131 7 жыл бұрын

Eu Amo o seu trabalho amigo !!! Muito lindo !

@pietroseven8228 2 жыл бұрын

This is crazy!

@kplorivera1480 7 жыл бұрын

maestro, grandioso trabajo

@robertlworley 4 жыл бұрын

Amazing!!

@Iktorn76 4 жыл бұрын

super

@eugenesingh6727 5 жыл бұрын

Great!

@SkyscraperModels 7 жыл бұрын

Amazing job!!!! Wunderbar!!! I know how difficult is to do that.

@minhnguyenhuu9710 3 жыл бұрын

Please tell me the paper types you use for the fuselarge and the structure inside. Thank you very much, keep up the good work👏👏👏

@models-by-fadda59 3 жыл бұрын

Hello, this is a model you habe to buy and it is delivered ready-printed. I don't know what paper thickness it is. But I estimate that the normal parts are printed on approx. 160 g / m² and the parts to be reinforced are doubled by 0.5 mm and 1.0 mm. You can buy the model here, for example: www.kartonmodellshop.de/stuerzbomber-douglas-sbd-3-dauntless-uss-lexington-1-33.html

@jeffersonkaio2112 5 жыл бұрын

Gut 👍👍👍

@androot69 2 жыл бұрын

Sorry but I have to ask, why do you use green for touch up????

@models-by-fadda59 2 жыл бұрын

On these mobile phone pictures the color looks much greener than in reality. I had used felt tip pens which didn't have all the colors. This one came closest to me.😳

@garybrounstein7725 4 жыл бұрын

I subscribed. I have also viewed your SBD Dauntless build for inspiration for me to build my wooden models with good detail, but I could not be as good as you. Fantastic! Thank you. How long did it take?

@models-by-fadda59 4 жыл бұрын

Many thanks. I never write down how long I need for a model. According to the image information, the construction took about 6 months. I guess several hundred hours.

@eviltinkywinkyspeedosound666 2 жыл бұрын

wow, sorry but did you buy the magazine? or just the template? I also want to know how you did the minute parts Red and gray at minute 5:10 with paper or putty, as well as the lever ball, thanks 👍

@models-by-fadda59 2 жыл бұрын

Hello and thanks. I bought the model already printed (see the link in the description). I actually built the red and gray gas bottles out of wood. 🥴 The balls at the end of the levers are made of white glue applied in several layers.

@eviltinkywinkyspeedosound666 2 жыл бұрын

@@models-by-fadda59 thanks I am building a lippisch p13 from orlik and it is somewhat difficult, but when I saw the model in the video I was impressed

@models-by-fadda59 2 жыл бұрын

@@eviltinkywinkyspeedosound666 Well, you have chosen an interesting model. I didn't know this plane before. Almost everything is round, which of course makes the building difficult. Good luck with your model and have fun.

@FernandoOliveira1979 2 жыл бұрын

how did u cut so perfect circles in 18:16?

@models-by-fadda59 2 жыл бұрын

As you can see from the stacks, I punched out the discs with a punch.😉

@arkadiuszc.4684 4 жыл бұрын

Welchen Kleber sollte ich verwenden, um die Kabine abzudecken?

@models-by-fadda59 4 жыл бұрын

Hallo, die Kabine wurde nicht abgedeckt, weil das Modell nicht lackiert wurde. Oder meinst du die Verklebung. Die kannst du mit fast jedem moderneren Sekundenkleber, mit Weißleim oder Spezialkleber (Kittifix für Kartonmodellbau) verkleben. Diese Kleber trocknen transparent aus.

@sebekglab 3 жыл бұрын

Check “Maly Modelarz” brand. They start it all with cartons models in Poland. Lovely looking build.👍

@models-by-fadda59 3 жыл бұрын

Many thanks. I know Maly Modelarz. Their models can also be bought here.

@1petriq 2 жыл бұрын

Man this is great, I see you know how to work with paper, but you should concentrane on coloring. The green color is really contrast to interior color. But detail quality is amazing. Great Job

@models-by-fadda59 2 жыл бұрын

Hello and thank you. I know the colors in the pictures don't quite match. But that is only so clear on the pictures of the camera, which was very cheap at the time. In reality, however, this is not nearly as noticeable.

@1petriq 2 жыл бұрын

@@models-by-fadda59 what kind of colors do you use? aquarel, water, temper or do you use sharpie? I am really glad to find your channel. On youtube its really rare to find so detailed paper craft contruction progress video on this detail level. Most of the time I have seen plastic kits.

@models-by-fadda59 2 жыл бұрын

@@1petriq Thanks again. I usually use Revell water soluble paints. When coloring the edges, I try to use felt-tip pens, that's the easiest way. As you can see in my channel, I also build from other materials because cardboard model making is very time-consuming and I need a sense of achievement every now and then.😉

@sinfonie291 2 жыл бұрын

Hallo, Jürgen. Tolles Modell. Habe bislang immer nur Plastikmodelle gebaut und war mit den Ergebnissen - trotz Airbrush - nie wirklich zufrieden. Diese Kartonmodelle sehen ja echt megarealistisch aus! Wie schwer ist es, so ein Modell zu bauen? Müssen die Bauteile noch bemalt bzw. lackiert werden?

@models-by-fadda59 2 жыл бұрын

Hllo Volker. Genau das war der Grund, warum ich mit Kartonmodellbau angefangen habe. Auch ich war kein guter Lackierer. Zunächst gibt es Kartonmodelle in allen Schwierigkeitsgraden, die Dauntless ist eins der wirklich schwierigen Modelle. Kartonmodellbau ist zeitintensiver, weil die Teile ausgeschnitten, die Knicke vorgerillt und die Kanten gefärbt werden müssen. Die Kanten färben ist ein muss, wenn du keine weißen "Blitzer" im Modell haben willst. Ansonsten spielt der Druck der Teilebögen eine große Rolle. Da gibt es große Unterschiede. In der Beschreibung sind zwei Links zu Kartonmodellforen. Die sind kostenlos, du kannst dich also bedenkenlos dort auch anmelden. Dort kannst du dich mal informieren und viele Beispiele sehen. Ansonsten einfach mal ein Bastelmesser nehmen, ein einfaches Modell im Netz herunterladen und anfangen.

@knollenwolle752 6 жыл бұрын

Klasse

@guntistrasser8454 3 жыл бұрын

Ein Traum , wie immer, aber woher bekommst die Klarsichtkanzeln ?

@models-by-fadda59 3 жыл бұрын

Hallo Gunti und danke. Die Kanzeln sind jeweils zum Bausatz gekauft,

@guntistrasser8454 3 жыл бұрын

@@models-by-fadda59 Hi Jürgen, hab leider Deine Info über den Kleber den Du verwendest vermurckst. Irgendetwas mit Easy ´Fix oder so

@models-by-fadda59 3 жыл бұрын

@@guntistrasser8454 Ich verwende "Kittifix Kartonkleber", den gibts auch bei Amazon: smile.amazon.de/kittifix-Kartonkleber-Bastelkleber-transparent-Flasche/dp/B08L3Q7SBD/ref=sr_1_5?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2RWIU5ZZCJ8MR&dchild=1&keywords=kittifix+kartonkleber&qid=1616329235&sprefix=kittifix+karton%2Caps%2C164&sr=8-5

@Anusfallus1234 3 жыл бұрын

Good job, but next time, try to paint edges of paper with acrylic paints. It's easier to make right tone of color, than with color markers.

@models-by-fadda59 3 жыл бұрын

Hello Ante and thank you. I know that, and I've done it with some models too. However, the color differences can be seen much more clearly in the pictures than on the model with the eyes.

@alvinkristina308 5 жыл бұрын

What name plane is

@models-by-fadda59 5 жыл бұрын

Hi Alvin,the official name of the aircraft is Douglas SBD Dauntless. You can get information about it from wikipedia. en.wikipedia.org/wiki/Douglas_SBD_Dauntless

@user-pv3mu6ow7v Жыл бұрын

Останній рік halinsky не випустив ні одної моделі .????

@models-by-fadda59 Жыл бұрын

Здається, це так. Шкода.