Planing a square edge with a cambered blade

Рет қаралды 26,627

5 жыл бұрын

More from David Charlesworth's 2016 DVD "Precision Planing".
The DVD covers precision planing of all 6 surfaces of a component.

Пікірлер: 39

@Dunc2222 7 ай бұрын

Beautiful teaching, including the perspective at the end about chasing errors. And perfectly timely for me. Thank you.

@123reivax123 2 жыл бұрын

THIS is the way to do it... perfectly explained, perfectly demonstrated.

@soffronitsky 3 жыл бұрын

David, this is extraordinary: woodworking taken to a superior level. Thank you very much.

@jassin1 5 жыл бұрын

Great video! always great to hear your experience in the field. learning so much.

@markgillard8113 5 жыл бұрын

Thank you for sharing your knowledge David

@rosshollinger8097 5 жыл бұрын

Wonderful as usual. I was actually battling this more than was necessary.

@johnlovell7308 3 жыл бұрын

Thanks David, another very interesting video!

@Thom4123 5 жыл бұрын

Thank you for all your information, it’s greatly appreciate.

@stevenlarsen1691 2 жыл бұрын

Very much great information. Fantastic video. Thank you!

@johntailing5283 3 жыл бұрын

Every day’s a school day! - Got me subbed! Thank you.

@danpelonis158 2 жыл бұрын

Incredible

@ibrhemahmed170 2 жыл бұрын

Thank you very much

@michael61png 5 жыл бұрын

There is more to it than hacking away with a plan

@rosshollinger8097 4 жыл бұрын

Have you any new videos coming out. I'm having David Charlesworth withdrawals.

@carbonitegamorrean8368 5 жыл бұрын

My block is set up with cant not camber for the same reason.

@35andRetired 5 жыл бұрын

Easter Egg!. He reused some footage at 2:11 of a different plane!

@jerrybowers3158 5 жыл бұрын

Finally a true artisan with craftsmanship of a master. His wisdom surpasses any I have seen in 30 yrs.I only wish I could be under his tutelage for a single day. Thank you very much for what you do.

@b1j 5 жыл бұрын

Jerry Bowers sign up for one of David’s one-week courses.

@jerrybowers3158 5 жыл бұрын

@@b1j Would sure be nice to do so, but he's half a world away from me.

@b1j 5 жыл бұрын

Jerry Bowers I live in California. I attended David’s course this past January. The experience was well worth the plane ticket.

@darrylportelli 2 жыл бұрын

what blade radius is used for camber for this kind of edge work please ?

@brightnuertey1451 Жыл бұрын

👍🌺🛫💯

@PotatoCheese 5 жыл бұрын

Thank you so much for this David. Your video is much appreciated, and I plan on getting the DVD shortly. In the meantime, what radius for the camber is used for this? Cheers.

@b1j 5 жыл бұрын

Not so fast, @@geezerdownunder . David is very much thriving and ready to come at you with his unmatched expertise and ultra smooth delivery. Check before you assert. This is the Internet, after all; we can't afford mistaken information, can we? Regarding the age of the material, is it any less trenchant today?

@DavidCharlesworth 5 жыл бұрын

Difficult to define camber. When offered up to a straight bit of dark plastic, the light showing under each corner, of a 2 3/8" blade is about 0.2 to 0.3 mm. Best wishes, David

@PotatoCheese 5 жыл бұрын

David Charlesworth thank you very much for your answer! Hope you have a good day, and look forward to as always learning more.

@DavidCharlesworth 5 жыл бұрын

Sound technique does not change much over time. I think if you were to inspect the hair colour, it is evident that time has passed! David@@geezerdownunder

@gilou. 3 жыл бұрын

Hi and thanks for the great video, I was searching for intel about edge trimming planes and stumble upon your "Planing a straight edge" (also great thanks !) I though Edge trimming planes were faster for squaring & straightening edges but I'm not so sure anymore : Do you think they are "gimmicky" or do you find a place for them in your furniture making please ? (also the possibility to add an angled fence to the edge trimming plane is a little plus). Thank you for your lessons Cheers from France

@davidcharlesworth6354 3 жыл бұрын

Gilou, I have never had one of those edge planes so cannot comment.

@gilou. 3 жыл бұрын

@@davidcharlesworth6354 An example is the Lie-Nielsen No.95 Edge Trimming Block Plane

@jaimeclifton9078 5 жыл бұрын

Then it rains in the afternoon, humidity rises, the board cups ever so slightly and hey presto it's no longer micrometer square.

@spayced 2 жыл бұрын

Lol yeah the demonstrations appear on wood that is already just fine. The same techniques work at bigger scale for boards way off so would be better to demonstrate on rough timber here so you can actually see the difference.

@2tall54 5 жыл бұрын

Are you recommending that all your planes blades be cambered to some degree?

@DavidCharlesworth 5 жыл бұрын

Paul, Yes most of my bench planes but there are some obvious exceptions, such as rebate and shoulder planes, and the 140. Best wishes, David

@jimfromri 5 жыл бұрын

Is the DVD available? Maybe it has a different name but I did not find it for sale. Impressive technique.

@DavidCharlesworth 5 жыл бұрын

Jim, It is part of my "Precision Planing" DVD. Available from my website www.davidcharlesworth.co.uk or www.lie-nielsen.com Best wishes, David

@andyboxish4436 Жыл бұрын

How cambered is the blade exactly? The computer graphic makes it seem exagerrated, but isn't the camber in reality only near the edges? Isn't 90% of the blade perfectly flat with only 5% on each side being cambered (roughly)?