Building the DIY Cold Plunge that Everyone is Building

Рет қаралды 156,850

Күн бұрын

dmjr.co/IceBarrel Looking to set up your own cold plunge? In this video, David Maus Jr and his brother Tyler Maus show you step-by-step how to create your own continuous cold plunge using an ice barrel, water chiller, submersible pump, and more. They also provide recommendations on additional tools and accessories to enhance your cold plunge experience. Get ready to build your own cold plunge and experience the invigorating benefits of cold water therapy! Don't forget to subscribe for more helpful videos like this one.
I will show you step by step how to build your own DIY cold plunge and you wont need ANY ICE, Kits are below in my links!
Ice Barrel is offering my viewers an exclusive discount when you use Discount Code "MAUS" and use the link: dmjr.co/IceBarrel
Thank you for Watching!
Like, Subscribe, & Share with a Friend!
dmausjr.com
I made a course showing exactly how I make a great living as a small content creator, check it out. :)
"The Creators Playbook!"
DMJR.co/Playbook
***********Links & Discount Codes***********
**COLD PLUNGE**
Ice Barrel Code “MAUS” dmjr.co/IceBarrel
Plunge Code “MAUS" or "DMAUSJR" dmjr.co/Plunge
Desert Plunge "MAUS" dmjr.co/DesertPlunge
Edge Theory Labs Code “DAVID” dmjr.co/ETL
ModTub Code “MAUS” dmjr.co/ModTub
Ice Up Industries Code “MAUS” dmjr.co/IceUp
Box Plunge Code “MAUS” dmjr.co/BoxPlunge
Polar Monkeys Code "MAUS" dmjr.co/PolarMonkeys
**DIY Kits**
All DIY Kits: dmjr.co/Amazon
500/300 DIY Kit: dmjr.co/500DIYKit
1/4 HP Cold Plunge Kit: dmjr.co/QUARTERHPKIT
1/2 HP Cold Plunge Kit: dmjr.co/HALFHPKIT
1 HP Cold Plunge Kit: dmjr.co/ONEHPKIT
DIY Sauna Kit: dmjr.co/DIYSAUNA
**SAUNA**
Sweat Tent Sauna Code "MAUS" dmjr.co/SweatTent
Redwood Outdoors Code "MAUS250" dmjr.co/RWO
Sisu Sauna Code "MAUS" dmjr.co/Sisu
**SLEEP**
Eight Sleep Code "MAUS" dmjr.co/8Sleep
MindLax Code "MAUS" dmjr.co/Mindlax
**MOVEMENT**
Kineon Code "DMAUSJR" dmjr.co/Kineon
Hooga Code "MAUS" dmjr.co/Hooga
Freak Athlete GHD Code "MAUS" dmjr.co/FA
Vitruvian Code "MAUS" dmjr.co/Vitruvian
Katalyst EMS dmjr.co/Katalyst
BODi dmjr.co/Bodi
Lumen Code "MAUS" dmjr.co/Lumen
**OPTIMIZATION**
Blokes (for Men) Code "MAUS" dmjr.co/Blokes
Joi (for Women) Code "MAUS" dmjr.co/Joi
**NUTRITION**
Armra Colostrum Code "MAUS" dmjr.co/Armra
Redmond REAL Salt/ ReLyte Code "MAUS" dmjr.co/Redmond
Masa (No Seed Oil) Chips Code “MAUS” dmjr.co/MASA
FroPro Snacks Code “MAUS15” dmjr.co/FroPro
Primal Beef Code "MAUS" dmjr.co/PrimalBeef
Create Creatine Gummies Code “MAUS” dmjr.co/Create
Cowboy Colostrum Code "MAUS" dmjr.co/CC
**SUPPLEMENTS**
BIOptimizers Code "DMAUSJR" dmjr.co/Bio
Momentous Code "MAUS" dmjr.co/Momentous
xEndurance Code “MAUS15” dmjr.co/XND
NaturALL Living Code “MAUS” dmjr.co/NatyLife
Heart & Soil Code “MAUS10” dmjr.co/HeartandSoil
**DRINKS**
Ketone-IQ Code “MAUS” dmjr.co/HVMN
PWR Lift Code “MAUS20” dmjr.co/PWRLIFT
SAPs Code "MAUS" dmjr.co/Saps
Slate Milk Code “MAUS” dmjr.co/Slate
**GEAR**
TYR Code "MAUSFGS" dmjr.co/TYR
Legends Code "MAUS" dmjr.co/Legends
Haven Bags Code “MAUS” dmjr.co/Haven
**CONTACT ME**
Email: dmausjr88@gmail.com (FOR PARTNERSHIPS)
KZfaq
dmjr.co/SUB
Instagram
/ dmausjr
My Website
dmausjr.com
DISCLAIMER
We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research, always. Some of these links go to websites that are affiliate links where I may earn a small commission if you make a purchase, at no additional cost to you. THIS VIDEO IS MEANT FOR ENTERTAINMENT PURPOSES ONLY.
COPYRIGHT NOTICE
This video and this KZfaq channel may contain copyrighted music and images. Any public, media and any other business usage is subject to business license. Unauthorized usage and publications are prohibited.
© David Maus Jr
Time Stamps:
0:00 What you will need
4:04 Unboxing and Prep
5:19 Connecting the Tubes
7:03 Connecting your Filter
8:39 Hole Placement
11:22 Drilling Holes
13:43 Chiller, Filter, and Pump Install
17:48 Return Tube Install
19:47 UV Sanitizing Pump
21:21 Turning it On
25:03 How to Drain the Ice Barrel

Пікірлер: 320

@Ramiz112 Ай бұрын

We live in Oregon, got this ice barrel 2 years ago. Got a new industrial ice machine installed in the garage for it same day. But over time, got too tedious throwing ice in. We followed these steps last week and other than a bum pump that i since had replaced by Amazon, it’s amazing. Thank dude, god bless.

@DavidMausJr Ай бұрын

Love this! So glad to help and thank you for the kind words. God bless ❤️

@Proximo83 Ай бұрын

@@DavidMausJr why do you need the submersible pump?

@scaggs4 11 ай бұрын

Thanks for this video, it was extremely helpful! Your discount code helped as well, and I just got my new plunge up and running today. If anyone is interested, I used a few 3/4 uniseals for the 1.25” hole I drilled into barrel for IN/OUT tubes and they fit nice and perfect. I also purchased a dual extension cord uniseal plug for another separate hole I drilled for the cords. It turned out very clean looking. Thanks Maus, and cheers everyone!

@DavidMausJr 11 ай бұрын

Excellent!!

@davidsanabria6545 10 ай бұрын

Thanks for the idea! I ordered the chiller from Amazon that David recommended and wondered about the holes. I was going to use duck tape, but uniseals look a lot better! Can you attach a pic of your set up? And did you have to go 1.25 for the seals to fit? What size bit did you use for the cords?

@paulgeary531 Жыл бұрын

Hey David, thanks for your insight and great set up. I'm thinking of a small improvement. If you use two 90 degree 3/4 elbows on your filter inside the barrel, you can then drill two small holes on the inside overjang lip and zip tie the filter flush and level with the overhanging lip. This would look great and the house wouldn't crimp the hose or imped the flow. I'm going to use your set up when i get an ice barrel. Thanks again.

@DavidMausJr Жыл бұрын

Totally that’s a great idea! Thank you so much!

@33crushman 11 ай бұрын

Thank you for making this. I did not want to spend the time figuring out how to do this on my own so this saved me HOURS of trial and error.

@DavidMausJr 11 ай бұрын

It’s what I love to do! Enjoy!

@mattsain3943 Жыл бұрын

Thanks for this video! I just installed the exact same setup yesterday after watching your videos. I was going to ask about the boost mode and if you ran it 24/7. But you answered that! Thanks for what you do!

@DavidMausJr Жыл бұрын

So glad to help!! Let me know how it goes! Just got out of mine!

@Justdoesit 9 ай бұрын

Through the spigot works great. Mine runs 24/7 and my Danner 1200 pump keeps it flow pretty darn quick. Thanks for the vids!

@DavidMausJr 9 ай бұрын

Good to hear!

@user-bp2st2zu4g 10 ай бұрын

I had an Ice Barrel and the mass quantity of ice was driving me nuts! I followed this video and bought everything through your link. Works perfectly! Thanks a lot!

@DavidMausJr 10 ай бұрын

Love this my friend!! Glad to help! 🤙🏽

@415Curly 9 ай бұрын

Hi!! Thank you for all these awesome videos. Quick question- I bought the chiller, tubing, & brackets. I already have an ice barrel, question-Do I need the pump in order for the water to cycle through the chiller???? I hooked everything up and the water was stagnant to the in valve.. thanks!

@jeffyeah4256 8 ай бұрын

@@DavidMausJr I have ice pod inflatable...Is there a cheaper chiller??? these things are pricey

@DavidMausJr 8 ай бұрын

So pricey, there are cheaper ones but i would recommend them. @@jeffyeah4256

@JojoSnow01 11 ай бұрын

LOVE this video. I have already made multiple cold plunge builds. Only one of them actually has a chiller lol I have no idea what I’m doing BUT I love my ice barrel. Awesome company to work with too. Love the detailed video because I am so torn right now. I build an old freezer ice bath a few months back and only spent 200 bucks on it. I live in KS and it gets so damn hot that it quit on me and the freezer is so old that I just gave up. Anyway I bought a new freezer for like 700 bucks and I don’t want to ruin it you know?

@DavidMausJr 11 ай бұрын

Thanks! I try to make it easy and this set up has been bulletproof. I know of hundreds who have done it and so far only positive feedback 💯

@jettoh 7 ай бұрын

Cool black T-shirt there ! Thanks for sharing your expertise! 🧊❄️👏

@DavidMausJr 7 ай бұрын

Love it! Glad to share!

@mattheendpod2659 10 ай бұрын

This is brilliant. Thanks, guy!

@DavidMausJr 10 ай бұрын

Thank you!

@JesseStevenPollom Жыл бұрын

Holy cow so helpful, thank you SO much!

@DavidMausJr Жыл бұрын

Glad it helped! Let me know if you need any more help too

@andrewmcdonald734 Жыл бұрын

I would either turn the chiller 90 degrees or step it away from the wall more. It cranks out a lot of heat and needs room to vent to keep the water cool. I have mine in a box, and it struggled until I cut a vent for it. Great set up tho, love the simplicity.

@DavidMausJr Жыл бұрын

Good call!

@diggdep 10 ай бұрын

After watching the 300 review and then this one, it's clear that the insulation on the 300 is amazing. Thanks for putting these together. Just ordered a 300 (and used your discount code).

@DavidMausJr 10 ай бұрын

You rock! Enjoy it, it really is a game changer!

@skarzynd 9 ай бұрын

Is there any difference drilling through the 300?

@skarzynd 9 ай бұрын

Disregard..holes already there!

@DavidMausJr 9 ай бұрын

dont have to, it already comes with the ports installed :) @@skarzynd

@SquatchRN Жыл бұрын

Great video!

@DavidMausJr Жыл бұрын

Thanks!

@BERTRAND85O 8 ай бұрын

GREAT VIDEO!!

@DavidMausJr 8 ай бұрын

Thanks!!

@BERTRAND85O 8 ай бұрын

@@DavidMausJr I’ve had an ice barrel for awhile but stopped using because of the pain of ice. I just ordered everything in this video. Appreciate it!

@FourandMoreFun Жыл бұрын

Love this set up! 🎉

@DavidMausJr Жыл бұрын

Glad you like it!

@yourpaljohn7990 4 ай бұрын

Thank you for all of the great information. I thought you looked familiar, and then one day you mentioned the automotive dealership all came back like a flash. So glad you found your calling. I’m on day eight of the rest of my life Cold plunging. I have the 1/4 hp. I live in Longwood Florida it’s outside in the mostly shade. Do you leave it on 24 hours a day? And you mentioned it was outside is it covered at all? I have mine set at temperature 45°. I can’t believe the positive effects that eight days have had on my body and my mental and emotional mind. Thanks again for all of your great information. Looking forward to new content. 🐾😎

@roguerepublic1460 6 ай бұрын

Awesome video. This has been on the list of things to do. It’s just not knowing how to have a consistent bath. Nice

@DavidMausJr 6 ай бұрын

You can do it!

@boone6751 Жыл бұрын

Exterior receptacles on any modern home are already Ground Fault Circuit Interrupting (GFCI). Additional devices downstream of that receptacle don’t add additional safety.

@DavidMausJr Жыл бұрын

Good call.

@rockod8880 5 ай бұрын

Great video thanks

@DavidMausJr 5 ай бұрын

Glad you enjoyed it!

@darrenhu7362 Жыл бұрын

Great video David! Would you able to answer/show the best way to connect your chiller (via tubes/connector) to the PVC inflatable tubs from ali-express that have pre built IN and OUT holes already? Much apperciated!

@DavidMausJr Жыл бұрын

I would love to help but I don’t have one. Send me some pics on Instagram @dmausjr

@topgun1178 8 ай бұрын

This is probably the best KZfaq video I have ever seen. Simple, clear and concise and helpful! Well done

@DavidMausJr 8 ай бұрын

Thank you! Glad to help

@topgun1178 6 ай бұрын

@@DavidMausJr Woke up this morning and the chiller seems to have stopped cooling the water. Temp is at 59 and slowly rising. It appears to be running but not cooling. Pump is working, water is flowing, temp is rising. Does anyone have any suggestions? I have no idea where to get technical support for this as it was purchased through Amazon and the sellers aren't great at responding.

@DavidMausJr 6 ай бұрын

Never heard of that happening, i would unplug everytihng and turn off all the power, wait a fe minutes and plug it back in. @@topgun1178

@topgun1178 6 ай бұрын

@@DavidMausJr yep. I unplugged it overnight. Started it this morning and it was cooling. What was really odd was there were two tiny pieces of ice in the barrel when I plunged a few minutes ago. I can’t imagine the condenser iced over when it was in the 50’s ambient. Crossing my fingers it stays working. I appreciate your responses! I am in Florida too so if yours works, so should mine! Edit. Stopped cooling again. WTF. Do you know how to contact them for tech support. Can’t find any info online. Should have a warranty right?

@Dabwick 9 ай бұрын

Every single time I see a DIY video the power tools of choice are always Ryobi LOL

@DavidMausJr 9 ай бұрын

They rock

@jasonmalice Жыл бұрын

I have a GCFI outlet that I installed to my outdoor outlet, because I have a hot tub. I shouldn't need a GFI extension cord, correct? Seems common sense, but one can never be too safe. Dude, you are my hero.

@JustinBarak Жыл бұрын

Correct

@DavidMausJr Жыл бұрын

Yes that should work perfectly, thanks!

@centerlineproairhockey 10 ай бұрын

When I went to get parts for this on Amazon there is an Rv/Marine Water filter on the list - which I got. But I don’t see in this video where to put it. Please advise. Thanks!

@DavidMausJr 10 ай бұрын

Absolutely! It’s in there just a short part. Use that to fill your barrel with water. Clean/filtered water in helps keep slime and grime buildup

@davidsanabria6545 10 ай бұрын

Hey, Davd! Thanks for the great videos and I wish I had found you before buying my barrel because I would have ordered everything up front! Your videos are so easy to follow thanks! One question, I live in the NW where the summers can be warm but that winters we get cold and sometimes have snow and ice. Do I need to take any special precautions with the chiller during the cold months or will the constant flow of water through the unit be enough to prevent damage or freezing? Thanks again!

@DavidMausJr 10 ай бұрын

Thank you so much! I live in FL and have no experience with the freezing cold winters, but what i would probably do is just remove the chiller setup in the cold winters and just use the barrel as a true ice bath. Unless someone else has a better answer.

@keithanderson1214 8 ай бұрын

Teflon tape on the fittings of the in-line filter should keep that from leaking.

@DavidMausJr 8 ай бұрын

For sure!

@skarzynd 9 ай бұрын

Thanks!! Just ordered the 300!!!! Any advice on winters in New England with the chiller? Might not need it??

@DavidMausJr 9 ай бұрын

You can just plug it all up and let the water ice up! Thats the cool thing about the 300, easy to remove the chiller stuff when needed.

@VTracer5 4 ай бұрын

External pump should be fine if the barrel is filled, check the NPSHr of the pump that's the Net Positive Suction Head Required. That's highest level of the water line in a reservoir to the suction joint/valve of the pump. The inner hose diameter of the pump on the suction side should always be bigger than the discharge to prevent cavitation or other issues.

@brandonsimon2804 3 ай бұрын

Well hot damn you’re the Nissan guy lol. I live in Tampa too. Was wondering how an outdoor cold plunge would do with our summers but you’ve answered

@DavidMausJr 3 ай бұрын

HAHA I was the Nissan guy, now Im the wellness guy.

@josephferlitto4069 Жыл бұрын

I bought all the components you listed below. Have you tried the method of an above ground pool pump so it’s outside the plunge vs the submersible?

@DavidMausJr Жыл бұрын

I have not but I have thought of it 🤔

@PattyMelt 3 ай бұрын

best channel ive found on this, how often do you change the water?

@DavidMausJr 3 ай бұрын

About once a month or so. Thank you!!

@michaelbreaux9164 Жыл бұрын

Great Video. Do you insulate your 3/4 tubing from the chiller to the ice barrel?

@DavidMausJr Жыл бұрын

I havent done it but know people who have, not sure its needed.

@bsworld1263 Жыл бұрын

Hey brother first off thank you so much for helping me create this amazing set up step by step. Question. I live in Florida to and I have the exact set up you taught us. With the active aqua 1/2hp. I can’t seem to get the temperature past 54 degrees. I wanna get it to its lowest 39. What are your thoughts ?

@DavidMausJr Жыл бұрын

I’m stoked to help! I love it! For sure. I’m finding myself to have issues some days keeping the temp down where I have it now. When I had it under shade all day, no issues, but now I have it in a spot where it’s baking in the sun 6+ hours of that day and it’s struggling to keep it steady. I’m going to have to move it to a shady spot. I have heard from a few people that ended up spending the premium for the 1hp chiller say it keeps the temp at whatever temp them want with zero issues, even if it’s in the sun so I think I’m going to order it and see. Is yours under good cover?

@bsworld1263 Жыл бұрын

@@DavidMausJr yeah I have it set up in the garage, but it can get pretty hot in there. I considered getting the full 1hp to. That may be a good move

@brockwilson24 7 ай бұрын

Great video. Thank you. One Question- could you possibly have the water filter outside the barrel?

@brockwilson24 7 ай бұрын

NM- Just saw the leak issue.

@DavidMausJr 6 ай бұрын

You still can, there are a ton of ways people have taken this DIY and modified it with bigger filters outside the barrel, this is just the simple way to get it done and it works great!

@safetactraining6487 4 ай бұрын

You handled that tip very well…

@DavidMausJr 4 ай бұрын

Thanks 👍

@scottcookmusic Жыл бұрын

Hey David. I’ve also got this set up. I’m curious, though, about what you said regarding turning off the pump?chiller?both? before getting in. Admittedly, this never occurred to me. Is there really a risk of electrocution? Your insight would be really appreciated. 🙏🏻

@DavidMausJr Жыл бұрын

To be honest I have never turned mine off. I get messages from people suggesting to do it. Using the gfci is a stronger suggestion. I say if anyone feels nervous to just unplug it or turn it off.

@momoney6373 9 ай бұрын

Wish I still had my aquarium shop. Would’ve been building these for half the price and better quality products as well.

@DavidMausJr 8 ай бұрын

not a bad idea

@sotodarwin10 Жыл бұрын

Hey David, Do you have any suggestions for a sit in barrels similar to the Ice Barrel? I really like you’re setup and looking to set up my own, but the Ice Barrel itself is pricey. Any suggestions would be appreciated! 🙏🏽

@DavidMausJr Жыл бұрын

Hey my friend! I am a huge fan of Ice Barrel for more reasons than the ergonomics but i do know of a few people doing my DIY using a (brand new) large trash can or something similar. Tons of options! Just need something to hold water. :)

@djpx 11 ай бұрын

Where can I buy the uv light? I don’t see it on the links. Thanks love the videos. Keep it up!

@DavidMausJr 11 ай бұрын

Man you are right i must have removed it but here you go! Thanks for the support! 👉 Water UV Pump/Filter: amzn.to/3iPR02V

@jasonmalice Жыл бұрын

I live in FL as well. Do you have any issues leaving 5he chiller outdoors, or do you only take it outside when using the barrel? I have a hottub as well,and the heating console I can leave outdoors 24/7; Can one do the same with the chiller? Thanks!

@DavidMausJr 11 ай бұрын

Nice! I have had my chiller outdoors and running 24/7’for over a year now and still runs like a champ. I think most people who have followed this DIY have theirs outside also. It’s a great setup!

@yynnooot 11 ай бұрын

Hey David, I really appreciate you sharing your projects! I want to make my own DIY Cold Plunge but can't afford an Ice Barrel at the moment, so I'm very cuious how your Ice Barrel setup compares to the Galvanized Trough project you made in an earlier video. What are the benefits to the upgrade?

@DavidMausJr 11 ай бұрын

Hey thanks!! Do the cheaper route to start out! Ice barrel is great because it’s upright, has a great lid, a strong base, takes up less space, and looks cool. But the trough equally holds cold water. So do what you can.

@PlzYT_DontDemonitizeMe 11 ай бұрын

@@DavidMausJr do you find that the ice barrel stays cooler than the stock tank due to the lid?

@bradyfiero9048 Жыл бұрын

Thanks for your videos! Do you think a 1/4HP would keep an inflatable ice pod cold or would you recommend 1/2HP? Apprecaite it!

@DavidMausJr Жыл бұрын

Stoked to help! I don’t recommend it. Unless it’s inside an air conditioned room and not fighting the heat of outside. 1/2hp would be the lowest I would recommend.

@JohnFlanagan-hs1fv 6 ай бұрын

Just buy a chest freezer and install a pump so the water doesn't freeze save yourself a lot of money on material and energy costs. Also install a upgraded thermostat with a range you can set to any temperature

@DavidMausJr 6 ай бұрын

Solid option as well!

@jasonporcello1623 9 ай бұрын

hey david 1 more question please, with the UV light is that all I would need along with the peroxide to keep the water clean? also with that set up how often should I change the water? thanks again for all the knowledge!!!

@DavidMausJr 9 ай бұрын

It works great! That depends on how you feel about the water. I change mine about every month

@beanerstones Ай бұрын

If the pump is inside and you turn off the pump and chiller must you reset ever time you turn it off, or do you let it run with the gfi plug ?

@user-io1lw9ju8s Жыл бұрын

Do you have any other suggestions for a water chiller? I had this one in my cart, went to buy it last night, sold out...

@DavidMausJr Жыл бұрын

Yes, there is a 1hp option on there, only thing is you will have to get all 1" tubes and options. But the good news is it will cool the water faster and keep the temp more true in the heat.

@josephferlitto4069 Жыл бұрын

What about using a free standing deep soaking bath tub for the tub? I haven't been able to find anyone doing this.

@DavidMausJr Жыл бұрын

So many options. I really like the Ice Barrel setup over anything else i used previously. (horse trough, rubbermaid tub)

@thomash4810 2 ай бұрын

I couldn’t read the entire sign behind your head at the end, but I believe execute is a verb, not a noun.

@reidtrenhaile7883 Жыл бұрын

Set this same chiller with 150 gal tub. The unit has been running now for 6 hrs the fan is going but the water temp is staying at 68. Every 45 seconds the unit makes a buzzing noise like it's trying to do something. For the water temp, patience needed? Does your unit make a 1-2 sec buzz?

@DavidMausJr Жыл бұрын

Mine hasn’t ever made a buzz noise. Might be the heat right now. The chillers are fighting that, do you have your tub covered or insulated at all? I found that to be a problem (mainly not covered well).

@felixdaigle1130 3 ай бұрын

Can I do this exact setup in canada with our cold temperature in the winter?

@DavidMausJr 3 ай бұрын

Yes*! If the power goes out and water sits in the tubes and chiller is the main concern. As long as water is always moving there should be no problems in winter (so I’m told by others living in the north) or just winterize it by removing the components in winter.

@nathanhoiness 10 ай бұрын

Hey David, wanted to see if you had any experience with Penguin Chillers? Just looking to support US products. The cold therapy chiller looks as if it’s for the ice barrel. But I have not seen any reviews for the product. Thanks !

@DavidMausJr 10 ай бұрын

I do not have any experience, i reached out to them to see if they wanted me to review their product but no response. I am sure if enough people ask them they might, but for now i use what i know for sure works. :)

@josephferlitto4069 Жыл бұрын

Super interested in the polar monkey set up until I saw the $600 in shipping cost. What are your thoughts on doing this set up but with the galvanized stock tank outside?

@DavidMausJr Жыл бұрын

It works too! That’s how it all started for me.

@bbpacks Жыл бұрын

I absolutely love the setup, but the cost seems sizable. I do want to go with the Chiller instead of ice. I’m finding it hard to pull the trigger on a $1,000 plastic barrel though. Thoughts/recommendations??

@DavidMausJr Жыл бұрын

Theres a lot of cheaper options on the market and you can even just use a bath tub or clean trash can. The barrel is amazing and its nice to know that is exactly what it was made for, and works great.

@kameronminyardrealtor 11 ай бұрын

100-150 gallon rubbermaid water trough from Tractor Supply is where its at. $1,200 for a barrel, step, and cover is insane!

@bbpacks 11 ай бұрын

@@kameronminyardrealtor That’s exactly what I did. I’m going to build and entire frame, side the frame, and buy a chiller for the price of just the barrel. What a rip off for $1,000 of plastic.

@DavidMausJr 11 ай бұрын

@@kameronminyardrealtor I had that exact same setup (and thinking) until i tried the barrel. But hey, thats why there are so many options, for so many people :)

@jondub9524 8 ай бұрын

I know this is old but Rain Barrels work great too!

@willig4692 8 ай бұрын

Awesome video! What size chiller did you use? Thanks. ✌️

@DavidMausJr 8 ай бұрын

I’ve used 1/2 hp and 1 hp. Both are great!

@willig4692 8 ай бұрын

Thanks David! Have a great day!

@PopGunEnt 5 ай бұрын

just get a chest freezer and have it line-x’d. will cost you way less than this and it has a built in cooler / freezer that will get colder than any external chiller. keep it simple champs.

@erikknapp5775 9 ай бұрын

I think I'd prefer an inline as opposed to submersible pump. Any suggestions?

@DavidMausJr 8 ай бұрын

For sure! You can actually use this same pump as either.

@Tom-fz6pe 8 ай бұрын

What is the best non-plastic water reservoir to use with a chiller?

@DavidMausJr 8 ай бұрын

Many people use the galvanized feeding troughs

@danielcuate5179 9 ай бұрын

David in the video you say to use 3/4 but in the shopping list/ kits you have mostly 1 inch hoses and fittings. Should i go with the bigger size or stick with the 3/4?

@DavidMausJr 9 ай бұрын

Great question! So if you go with the 1HP chiller (which is usually the only one available) you’ll need 1” tubing. Any of the smaller sizes you can use 3/4” for everything.

@danielcuate5179 9 ай бұрын

@@DavidMausJr you're the man. Thank you.

@jeroenkamp3506 9 ай бұрын

I live in the Netherlands and that Chiller is not available here. Do you have a more international option? Thanks in advance!

@DavidMausJr 9 ай бұрын

Thanks for the love from the Netherlands! I don’t but will try to help!

@guzgrant 5 ай бұрын

Surely getting something like a Lumi with some ice from the freezer when the weather is warmer is a fraction of the cost and effort ?

@DavidMausJr 5 ай бұрын

Tons of options. This was the best for me so sharing it with my friends

@bbqsandwitch3994 10 ай бұрын

Im curious why not use the drain at the bottom as your outlet with an external pump instead of drilling the extra hole?

@DavidMausJr 10 ай бұрын

You can easily do that too, the hole is just a little small and i needed more flow rate. the submersible pump does a great job of that.

@brentgwidt859 10 ай бұрын

David, do you have a link to the filter you use?

@DavidMausJr 10 ай бұрын

This one? amzn.to/3KABJOk

@user-jc5si1ic4i 9 ай бұрын

so im looking at a chiller from Icepod and they dont use a submersable pump? why is one needed with this set up? I have a portable icepod. wondering if I can go without a submersible pump?

@DavidMausJr 8 ай бұрын

You can use the pump as submerged or inline. This one I show that is.

@MotoWilliams 10 ай бұрын

Do they make chiller heater combos? (as cold climates exist)

@DavidMausJr 10 ай бұрын

Totally! A few companies make the all in ones (polar monkeys, ice up industries, redwood outdoors) I have discount codes in my videos for all three

@skarzynd 9 ай бұрын

David, does all the equipment/hoses etc. still the same for the 300?

@DavidMausJr 9 ай бұрын

Yep (well a little different)! Kits in my video description with everything needed for the 300

@Moore221092 Жыл бұрын

Irrelevant question, looks like a g shock watch, was curious what model lol

@DavidMausJr Жыл бұрын

GBDH2000 and I love it so much I made a video on it. Check it out: New G-Shock GBD-H2000 vs Apple Ultra vs Whoop 4.0 kzfaq.info/get/bejne/iLOodL2rqJ_NqYU.html

@michaelchristian174 9 ай бұрын

Could you silicone the hose outlets to not loose water?

@DavidMausJr 9 ай бұрын

For sure!

@furygaming180 6 ай бұрын

Random question, there any danger getting in the water with the electric pump? If something were to malfunction...?

@DavidMausJr 6 ай бұрын

It’s always a good idea to unplug.

@jasonmalice Жыл бұрын

Excellent, video my friend. Thank you very much. Ballpark, what would you estimate the cost you total? Cheers.

@DavidMausJr Жыл бұрын

Thank you! It really all depends on the chiller u go with. I am starting to really recommend the 1 hp chiller (but it’s $1700) but it hold the temp right on the button no matter how hot outside.

@jasonmalice Жыл бұрын

@@DavidMausJr yeah, silly me, I did the math after asking you like a silly idiot instead of taking the time to do the math myself. But I appreciate it man. From one Florida guy to another, thank you..

@jasonmalice Жыл бұрын

@@DavidMausJr you really kept it on for 6+ months straight with no problems at all? Because that's definitely something I could see myself doing, you know how effing HUMID it is here.. I just really don't want nothing to burn out, knock on wood

@jasonmalice Жыл бұрын

@@DavidMausJr Yeah? 1 hp is better safe than sorry? what temp do you keep it set at? Cheers brother.

@christophergonzalez7460 9 ай бұрын

Does anyone have their set up outside full-time? I live in NJ, and have my set up outside. Im worried about leaving the chiller outside unprotected...

@DavidMausJr 9 ай бұрын

Mine is outside full time here in FL. Watch my latest post (just posted) kzfaq.info/get/bejne/oM91lN2A1cfRo2Q.html

@SantaPlaysPickleball Жыл бұрын

What consistent water temps are you getting with this chiller? How low can you maintain? Thanks.

@DavidMausJr Жыл бұрын

I’ve had it maintaining 39 but I like 44-46 personally. It holds well.

@Patriots2004 2 ай бұрын

I just purchased a polar monkey killer .8 hp. Do I still need to get a pump?

@DavidMausJr 2 ай бұрын

Nope it’s all in one!

@ryansmith9897 Жыл бұрын

Do they make fittings to use and keep all leaks from drilled holes from happening?

@DavidMausJr Жыл бұрын

I’m sure there’s a way but I haven’t found them yet.

@ThanksWyatt Жыл бұрын

Yes, the piece you are looking for is called a bulkhead fitting.

@ThanksWyatt Жыл бұрын

@@DavidMausJr Bulkhead fitting will make it not leak at all through the drilled holes.

@DomTullipso 10 ай бұрын

Is there any reason you can't do this exact setup, but only have the in and out line to the pump inside, while the pump, filter and chiller all stay outside?

@DavidMausJr 10 ай бұрын

Yes absolutely can! Problem is the spigot restricts the water a lot and it won’t chill as well. But it’s doable

@deanshrouder8002 2 ай бұрын

Is it OK to submerse the filter underwater like that?

@DavidMausJr 2 ай бұрын

Yep!

@chace96 9 ай бұрын

I've been watching too much Joe Rogan. Here is why I love my 100 gal stock tank. With the massive room, I can cold plunge with my wife at the same time. Joe mentioned that one of the Gracie's cold plunges with a snorkel. Well, my crazy axx purchased a snorkel for the cold dive smh. You can do that with the barrel plunges.

@DavidMausJr 9 ай бұрын

Haha thats a fun challenge. We go under for a while too. My 12 year old daughter did 8 seconds yesterday at 47 degrees

@chace96 9 ай бұрын

@@DavidMausJr Thats great. Definitely that snorkel is a game changer.

@beanerstones 9 ай бұрын

What water filter did you use, I would like the link please thank you

@DavidMausJr 9 ай бұрын

Here is my favorite cleaning supplies for all my cold plunges: amzn.to/3QhpSZc

@beanerstones 9 ай бұрын

@@DavidMausJr I actually was asking about the in-line water screen? And connection, think I found them but in case I’m wrong?

@tdeeez 10 ай бұрын

Any additional items you would install with this system since this video? (Not including ozone)

@DavidMausJr 10 ай бұрын

Nope this setup has been tried and true for so many!

@tdeeez 10 ай бұрын

@@DavidMausJr Right on. For the UV pump - would you recommend running it '24/7' with pump and chiller as well? I plan to kill power to it when I'm getting in to plunge, but figured I'd ask.

@DavidMausJr 9 ай бұрын

Totally! Try to keep water moving at all times when you are not in it. @@tdeeez

@keatonpage509 Ай бұрын

Do you think I could do this but with a horse trough?

@DavidMausJr Ай бұрын

Totally! That is actually how I started all of this.

@TheSkyHive 5 ай бұрын

I've never made one of these, but is there a reason why you chose not to place the stainless steel filter just outside the barrel? That would leave you less things to bump into I would imagine, but what do I know? Comments?

@DavidMausJr 5 ай бұрын

I had it like that in the beginning but it started to leak a little and rather have it leak back into the barrel. It doesnt leak anymore but im use to it and there is surprisingly a lot of room in there and its not an issue.

@jonathonmoores9137 11 ай бұрын

How do you not get electrocuted dropping all the water on the cords like at the end of the video

@DavidMausJr 11 ай бұрын

Flip the GFCI off. (No power when getting in)

@nickfaber610 8 ай бұрын

How much did everything cost after it was all paid for

@DavidMausJr 8 ай бұрын

Ice barrel and Chiller are both the most expensive parts, you can get it all right now for about $2200, links in the video description too.

@user-by2kq6qr3z 9 ай бұрын

Lost me at the $1100 water chiller. Expensive build.

@DavidMausJr 9 ай бұрын

Yea the chillers just keep going up in price. Still cheaper than ice if you plunge every day IMO

@brandiniron6112 9 ай бұрын

Still think it’s absolutely ridiculous paying 1200 for those plastic barrels. Smh

@DavidMausJr 9 ай бұрын

A lot of people agree with you and many disagree.

@thanks4that261 6 ай бұрын

$1200 for that thing???? Wow I was thinking $200. Yikes.

@matthewstringer1119 5 ай бұрын

It’s wild because it’s a glorified trashcan but you can buy a rain collector from Home Depot or Lowe’s for 100 bucks which serves the same purpose and essentially the same thing

@howitzeroutdoors 5 ай бұрын

100%

@bigdusss 5 ай бұрын

I got a 100-gallon rubbermaid stock tank for 150 out the door. It has a threaded drain plug so you can mount all your electrical equipment outside the water. Bought a waterproof cover off Amazon for another 50. The stock tank is oval shaped so getting in and out is easier.

@303visuals4 11 күн бұрын

Where is the parts list link? I’m only seeing all your referral codes in the video description

@DavidMausJr 11 күн бұрын

There’s a section with different size chillers. Check that and pick based on the size you want.

@303visuals4 11 күн бұрын

@@DavidMausJr 10/4 thank you

@33crushman 11 ай бұрын

Hey David, got mine up and running for 24 hours now and it hasn't been able to get to go below 57. I am in Texas where it's 100 everyday, but i was hoping to at least be able to get it around 50 degrees. Have you heard of others experiencing this or do you think it could be an issue with the chiller?

@DavidMausJr 11 ай бұрын

Since it’s already that hot out give it a few nights to “beat the heat” or jump start it with some ice. It’s just fighting the heat trying to cool hot water. It will get there

@33crushman 11 ай бұрын

Good deal, appreciate the quick response!

@michaelabalos2718 6 ай бұрын

@33crushman did it end up working out for you?

@33crushman 6 ай бұрын

@@michaelabalos2718 It did not. I ended up buying the 1HP, and although on the hottest days it struggled to go below 55 during the day, by morning when I'd do my plunge it could get it to 49 where I like it. If you live in the south or out west I think the 1HP is necessary.

@michaelabalos2718 6 ай бұрын

@33crushman thank you for the quick response. You’re a tremendous help.

@asuperstar 7 ай бұрын

How about using this where it freezes? Also what about volume? I am 5-10 and 255 lbs.

@DavidMausJr 7 ай бұрын

The ice barrels are made to withstand freezing temps. A lot of people remove the chiller during the freezing winters (since they don’t need to chill the water) and just use the barrel as an ice bath container. You would fit with plenty of room to spare in the ice barrel 400.

@DavidMausJr 7 ай бұрын

100+ gallons

@juliennicolas5807 7 ай бұрын

Not sure if I missed this; how much is the whole set up?

@DavidMausJr 7 ай бұрын

Barrel is about $1100 after discount code MAUS Chiller is about $1400 on amazon Pump, tubing and everything else is about another $200 on amazon You can get a smaller or larger chiller depending on where you live and that is the most expensive part of the investment

@mauriciogonzalez3225 5 ай бұрын

I like the idea there with the cold plunge. I can't understand why you would put yourself at unnecessary risk by using a submersible pond pump. I would suggest using a cheap bestway pool filter/pump combo. The benefits are that you have a decent and easily replaceable filter and the electric cable is no where near the water. When your brother dunked himself deep into the water and it overflowed everywhere I was cringing. I know you said to turn off the pump before you get in. Realistically speaking, how many people will actually do that? Just a thought. Otherwise great build

@DavidMausJr 5 ай бұрын

Great point! Definitely need to be safe, no matter what safety first!

@bryanodonoghue4975 5 ай бұрын

Just add ice to it when you initially fill the barrel

@DavidMausJr 5 ай бұрын

Good idea too!

@adri6959 5 ай бұрын

Looks like a death trap with all the electic cords in the barrel

@DavidMausJr 5 ай бұрын

Yea seems that way. No issues and there are other ways and updates to it that can be made. More videos on my channel show :)

@Dixon1430 6 ай бұрын

Dude. What happened to his chiller? Damage with shipping? Looks like something fell on the top of the control panel?

@DavidMausJr 6 ай бұрын

Yea they replaced it. He wanted to get it setup so badly though

@chavito2483 6 ай бұрын

Can't you get electrocuted if a wire in that submersible pump cable is exposed to water? Not sure if possible but the thought of that as possibility is scary AF

@DavidMausJr 6 ай бұрын

im sure that is a possibility, a good idea is to unplug it all when getting in

@204514602 2 ай бұрын

No one gonna comment about the pouring water out of the holes at the top?

@DavidMausJr 2 ай бұрын

That was for show. When you fill it up that will happen until you find the right fill line for your size.

@TheDaddyDuke Жыл бұрын

Save your money. Buy a 1/4 HP chiller. It works in 80-90 degree weather no problem.

@DavidMausJr Жыл бұрын

Thats great to hear! Then i stand corrected :)

@andrewmcdonald734 Жыл бұрын

Depends how much water you use. In the barrel it will likely keep up, but barely. In a tub, you def want 1/2.

@TheDaddyDuke Жыл бұрын

@@andrewmcdonald734 for sure you’re right. My Ice Barrel has 90 gallons or so and it works great. And that’s all that 1/4 HP up to chill.

@mattsain3943 Жыл бұрын

Mine is outside in the sun a bit. Black barrel. I’ve got the 1/2 and it can’t keep up during the day. I cover with a white sheet which helps. I’ll get down to 45 degrees at night. During the day it gets to about 52-55. Either way, fantastic and I love not having to add ice!!

@TheDaddyDuke Жыл бұрын

@@mattsain3943 it’s not sustainable, leaving it out in the sun. It’ll break down way faster than if not. Sunlight oxidizes, rubbers and plastics and things. It would not be in the 50s I bet if it were not in the sun absorbing heat all day long. My 1/4 HP chiller is around 44° in the Shade when it’s 85° out. When I wake up in the morning, it’s 40°.