Ryobi is made by TTI tho. Same company that makes Milwaukee

@@AltimaNEO it's owned by TTI not made by TTI. they still have to compete with each other.

@@inskinov412 You know that ain't competing. Theyre not even in the same market segment.

@@blipblop92 You're right Ryobi tools are far superior compared to Milwaukee.

@@blipblop92 That other guy is ridiculous. Yes, Milwaukee tends to perform better, but Ryobi has several segments locked down. 1, battery support. They've kept the same battery format for over 20 years. Literally no other tool manufacturer has done that, especially when tools went from NiCad to Lithium. A brand new Ryobi lithium battery will work in their old blue NiCad generation tools. 2. Home owner enthusiast. While there's a lot of competition at the low end, Ryobi still competes competitively there. There's some confusion with their tools/batteries as they have several similar tools that swing wildly in performance. However, the step up to better tools is easier if you don't have to change batteries/brands. 3. If you want the choice of hundreds of different tools that run on the same battery, Ryobi is your only real option. Milwaukee is for people who want the absolute best performance in most tools, or tool snobs. Milwaukee is to cordless tools as Snap-On is to wrenches and ratchets.

I have hundreds of videos like this and we love it

I wach witout understanding English 😅

It's very useful if you want to buy that stuff.

This Sir, Im inclined to agree with you! 😁👍✌🏻👏🏻🇺🇸

I agree with you on that one TTC

You two are part of the reason I don't regret going the Ryobi route. Got my best friend in the Kobalts. (Note: I vastly prefer Kobalt's drills) We recently did strut replacements on our respective Subarus. She got super frustrated that her 3/8ths Kobalt impact wrench didn't have the beans to break free several of the nuts we were dealing with. Her astonishment when my p262 popped them off near instantly was. . . hilarious. Of course we got her the new big Kobalt half inch that same night. . . And used it to change tires at a Gambler 500 event the next week.

I thanky Kawaii and that is what these videos are for

IF I'm a Starter Rookie Handyman I will start it with Hercules or Bauer Tools at the Harbor Freight Tools! affordable!, much more cheaper and affordable than Ryobi, or Ridgid and they're all both made in crappy Chyynnnaaaaa!! 🇨🇳 Anyway!! Now when I get to make money, and already started and got established it then I'll upgrade my tools to DeWalt 🇺🇲 and Makita 🇯🇵 tools. And perhaps Bosch 🇩🇪 too!

Why I went with ridgid over the dewalt stuff I own

You will pay later I promise you!

@@craftsmantrucker6867 Don't mix tool brands, I promise you Makita will treat you better, the batteries are made with Samsung cells that are made to last, in my country batteries are about $150 plus for 5ah of almost any decent brand, and staying with tools that all use the same battery is simply the best thing to do!

its ok, these tests aren't to deem a winner for all time.

You killed my buzz

it is a major improvement since years ago

I’m a diesel mechanic that works in a big shop with 60 other guys. There isn’t a single ryobi tool there for a reason… fine for a guy just messing around at home but in a professional setting there is a reason out of 60 guys nobody has a ryobi tool….

Their prices unfortunately are going up like lumber is, Chris

I thank you Chris, more videos are coming out soon on these

Here in Canada combo ryobi drill impact one+ hp is 250$ 2amp battery dewalt xr combo 2amp battery 280$ .. I don’t see the point going ryobi for 30$ on those

Well said

Ryobi is more of a diy tool, the few people I've known that are in some sort of trade that bought ryobi because of price, switched back to their original tools because ryobi tools don't last and don't stand up to the beatings that tools like dewalt, milwaukee or makita take

I do thank you so much for viewing :)

lol. I say that all the time

you are welcome and I thank you Harvey

I also just bought this model impact after watching this video. HD even matched its online price when I went by to buy it this past weekend. Thanks for the awesome video, man.

Indeed it does toolhead, I agree with you on that one

No it isn't. Ryobi is originally Japanese tool brand that been brought to the North American market. That type of power should have Been around for a long time IF it wasn't for Milwaukee and Ridgid Suppressing Ryobi. I heard the story that Ryobi Tool was about to leave the TTI and planning to sue Milwaukee and Ridgid and the TTI for 600 Billion dollar law suit. And then Milwaukee and Rigid decided to give Ryobi something. And there you have it! More Ryobi HP tools that popped out of nowhere

there are a lot of those videos coming up. im getting that new battery soon

I thank you Greg

Ryobi Milwaukee and RIGID are all owned by TTI

I think all brands are getting crazy with model numbers

Mainly concentrate on smoothness and refinement Will. This would serve DeWalt better, and they should tweak their precision mode, as it is on the right track. I have consistently sunk small screws with the precision mode on the 12 volt Xtreme impact. Peace! 👍

@@georgedavall9449 Huh ok, thanks for the info. Don't get me wrong I am a DeWALT guy through and through. I don't even own Ryobi tools. I just respect how they are becoming a premium and reliable brand.

they do make the 888 but Dewalt needs to majorly upgrade it

Duh when you go from brushed to brushless there is a big power difference

Lol not even a Milwaukee video and first comment is about someone saying Milwaukee is better...smh

I can do 90% of the work.

12v tools are powerful now, that is why I love them an they are favorite

I thank you Wayne

yes I have and more videos are coming with that tool as well

will do and I thank you for the suggestion Elliot

lol

I recently learned to relax and not worry about uploading everyday anymore. the more worn out I become the lesser quality the content becomes so I upload every few days now and I thank you for viewing Nacho

nachoverdes 3421. DeWalt DCF 887 is Durable and Well balanced, and that new Ryobi brushless impact driver seems to be Durable too I can tell, the only thing that will ruin your impact driver is when you decide to throw off 3/4" to 1-3/4" Paddle Bits and that seems so stupid. That's the job of Hammer Drills and the impact driver is not really meant for Drilling. You can use your impact driver to drill pilot holes no bigger than 1/8 of an inch but that's should be about it. Impact Driver is meant for driving screws and large fasteners, any fssteners bigger than the Spax power lags and Timberloks, impact wrench should be usu either the Mid range or the high torque. That's why always remember the context. Always use the right tools for the right job Regardless of brands treat it with utmost respect.

Well i own a p213 hammer drill (5 years old) and to be honest it shouldn't be alive.... But man.... It just won't die

The ryobi impact in the video tends to get really hot fast sometimes on third speed when there p237 three light three speed impact driver gets less hot because it is a longer impact driver

Brushless tools are so powerful now a days.

I do thank you so much for viewing

im not sure which versions that is. i still need to get the variable trigger version

I thank you for your support Greg :) and more videos are coming.i just uploaded Dewalt vs Craftsman

@@ManCaverTools Wow! So, like, who is Greg? 😳🤔🙄🤷🏻‍♂️😁😀😂 You’re Welcome Dave

Чувак, то что девольт оказался на мелких крепежах быстрее на десятые секунды ,не прощают того что на десятые градусы он перегревался быстрее, а ведь ты за свои бабки купил проф инструмент , разница в них в двойне!

Yes

@@georgedavall9449 is this the top of the line ryobi?

I thank you Jesus

I do many videos on these with many different kinds of batteries

People need to give ryobi more credit then it gets

I thank you NIKK

Ryobi doesn’t compete with dewalt in the slightest. I’m a diesel mechanic and the there are no ryobi tools in the shop out of 60 guys for a reason. They are fine for a homeowner and the guy that changes his tires a couple times a year but with everyday abuse in a shop environment they are shit…

@@colin7748 idk what is in your shop.... But in those tests in some Ryobi beats DeWalt, and in other is very close, the numbers don't lie

@@Lucas_sGarage it’s the longevity of the tool that is the problem. Numbers can’t show that

@@colin7748 experience can, i have a 5 year old Ryobi drill that i use every day, and it rocks

@@colin7748 Don't talk shit.

I will be doing more tests on these impact driver soon, I thank you for viewing Minnesotaman

I do thank you so much for viewing

look at the date of this upload. this is an old video

yes I can

Best hammer drill is Milwaukee

I have a dewalt flexvolt hammer. It clows thru concrete like it was hot butter.

Flexvolt advantage is best

If you're drilling concrete alot. Jus get a rotary hammer drill.

I just uploaded one and I thank you for viewing Lippy

I thank you for viewing :)

I've been making fun of the contractors in my jobsite because they're using the expensive Milwaukee tools made in china, but I'm making more money than them for using a cheapy ass Chinese tool Hercules and Bauer from Harbor Freight tools when I used to be a Starter.

@@craftsmantrucker6867 if you are serious about your job getting done in timely manner, you cant be using chinese tools

@@Mint-cb2vc lol! 😂😂😂Well that's where I started 18 years ago! When I got my certificate and graduated from the Trade School I did Apprentice in with some licensed and certified contractor/builder in my 1st 6 months in apprenticeship I don't have that much tools with me besides my Uncle's old skilsaw sidewinder that I borrowed, I got a cheap ass black and decker 20V drill and my newly bought Vaughan California Framer 23oz Milled faced Framing Hammer and Vaughan California Framer 19oz Smooth Face that I use for finish carpentry, Stanley tape measure 25ft. Irwin Chalk Line, and Swanson Speed/Rafter Square and some Carpenter pencils. That's it! That's all I have when I started! Then after 6 months I'm starting to get some good checks. I got me a some cheap ass impact driver. Still cant afford the the big three. Until I finished my apprenticeship, then got my license general contractor and Framer/Carpenter still no HVAC because I'm still saving money for that specific trade school that teach and trains people on HVAC and Electrical. On my 4th Year that's where I got my very first descent impact driver dcf885 and the drill circular saws, Multi tool, grinder, 12" DeWalt compound miter saw all of it came with package tool deal from some Authorized DeWalt Powertool Dealer, then I got my first compound miter Saw. All of it are DeWalt brand. On my 7th Year that's where I got some Makita Tools, Angle Grinder, Miter Saw, and the Magnesium Hypoid Saw but I purchased that circ saw from Japan. Until I decided to get a another one because I'm afraid that it's made in Japan and might get stolen in the jobsite so I got another Makita Hypoid Saw that is crappy Chinese made from home Depot I only got it for $129 back in the day, corded they're all corded except the Impact Driver, and Drill. Then I got Bosch Bulldog Xtreme corded Rotary Hammer Drill. Until I get much better paychecks more money then I can a much better tools. And up to this day I still kinda miss using a cheap ass tools like the Hercules 20V Brushed Impact Driver kit that I got from Harbor freight tools. I have money, better paychecks better job as a general contractor why buy poor Chinese tools. Well! The top of the line and most rated tools such as Milwaukee brand is also made on China! And I'm not gonna spend that kind of money expensive tool Milwaukee still a Chinese made tool! It's a robbery and a scam to me. Even though I now have lots of money. I still prefer cheap stuffs that works because that's what the majority of people are now buying now a days.

I do thank you so much for viewing :)

Come on dude its not even close

Definitely

Im not sure why its taken them so long to this point. But now they might be waiting on the flex 24v system from chervon tools to show before they release a new model.

I agree with you on that one Juan

for what reason? I mean we soeak about 0.2 to 1 scond differences on regular tasks. I don't understand that anybody is testing impact drivers for speeds and judgments on a half second difference but never talks about the actual feeling of the tool like haptics or vibration

I will be getting the flex tools soon :)

yes we will :)

Nice I will watch

yes I can and I thank you for the suggestion gg

we will find out soon

i hope new ones works better .....i love ridgid tools but for las 2 years...the batteries last less than 10 min continuously!

once I am able to buy them I will.

meanwhile the money saved by buying Ryobi is invested and growing somewhere so you don't have to sell used tools like a crack head..

They will.. They just came out with new line of 12v tools

@Derek Claycomb the 887 is the current 20v max model

I want to get the 888

this ryobi is pretty powerful :)

I believe I did. husky adapters didnt last too long in this channel

@@ManCaverTools what is your favorite adapter?

we will find out soon

@@ManCaverTools it's been two weeks!!!! That's an eternity in frog years!!!!!!!

that is pretty much the it lol

Agree

I need to get the 888 model and see how it does against this

that is why I think dewalt is a very good brand to get into. lots of places sell them

these videos show the performance difference between brands so people can decide to make the investments run a batter line they want

I thank you David

I do thank you so much for viewing

as soon as I get at cat tool I will :)

Just about all impact drivers have variable speed trigger as far as I know. I would not doubt that you are able to.

yes you can, variable triggers are coming now with speed selection

I have a TTI one and a Stanley one

@@ManCaverTools nice! You ever take them out and bash them?

Just curious, are you talking about the brushed or brushless Ryobi tools?

No! They are not. The Ryobi is an updated tool that puts out respectable performance and reliability. The Dewalt DCF887 is only good at starting fire on your BBQ grill. Instead of coming up with a new generation of impact driver with an improve heat-dissipation system in its engine, Dewalt just made the DCF887 more expensive by installing a bluetooth chip in it for its “Tool Connect” feature then offer it again to the public as the new DCF888. Dewalt probably thinks it’s OK to smoke an expensive tool as long as you do it in style (with bluetooth). I’m on a Dewalt platform and I can say that there are tools in their 20v line up that are performing decently but their XR impact driver is a huge disappointment.

I agree with you on that one Chris

I can do that and I thank you for the suggestion

@@ManCaverTools awesome!! Thank youu!

I thought I put the prices in this video. sorry if I didnt

I do thank you so much for viewing

not sure where youre based but here in england the ryobis HP are still significantly chepaer than high end brands like makita and milwaukee.

@@TheSixYardBoxyep - Im from Denmark same here - Ryobi hp (brushless) is cheaper than similar dewalt, Makita etc. Im amazed by the performance of those series !

I agree with you on that one Makita

It was a short test but it already went more than 100 degress. If the test went longer, I’m sure it would go up in flame.

@@josephunson4982 why do you think that the newer dewalt drill/impacts tend to smoke. I know someone that's a contractor that has a usa made dewalt drills and loves them.

Lol here in the uk we use dcf 887 made in prc at cladding, installing thousand of screws during a week,( heavy steel screws) sometimes it gets so hot u can burn an egg on it, but never does it smell like something is burning! Idk what u guys talking about lol

I havent had that issue yet

The new 8ah battery. Im not sure if theres other sizes yet.

@@TroBudden okie dokie

ill have to make a video on that

New 3ah, 4ah, 6ah, 8ah, 10ah and maybe the new 2021 flexvolt

@@FoxOutdoors Thank you sir for the info 👍

I thank you o c