Great video. Great channel. Where can I get that little light? 5:28

$210 is a deal. I ordered this and the Batmobile and Mcfarlane threw in a free action figure with a thank you note. I was pleasantly surprised when I opened the box.

Lucky! Should’ve been $150, max!

That batwing looks pretty cool mounted on the wall. The fact that your walls are purple gives it that night time look.

Purchase the “Hazmat Batman” figure. Remove the oxygen tank off his back. Repaint him grey and black as you see fit. The 2 tubes leading to his mask and the face shield looks like Batman is wearing a High Altitude aviator’s Flight-Bat-Suit. End result looks way better than simply sticking the 89’ Batman in it. Also- Amazon sells wall stickers of the moon. (Glow in the dark available as well) Stick that behind it on the wall. 14 dollars.

Those well known measurements..... Long, tall and short!

I got all 3. The McFarlane, the SpinMasters 12" and 27" version. The McFarlane looks better than the Spin Master. The problem is it's NOT $210.00 better than the Spin Master! Not even close. I don't know what plastic you're feeling, but the takeaway I got was: "brittle" This think doesn't have the dense plastic of the Batflack bike. It feels like those cheap plastic holiday yard ornaments that crack when you try and change the bulb in them. Brittle and cheap. Also the shade might be movie accurate, but I just like the matte black of the Spin Masters. Also, it should have been designed to be disassembled. I haven't fully snapped my wings in because when not on display, I'd like to be able to put it back in the box. I already made that mistake with the fins which means I had to remove some of the original packaging material just to put it back on the box. All you needed was 4 screws (2 on each side) underneath hidden in the design. Then you could display it or pack it but now once you snap those wings you can't re-pack it without running into potential breakage (again this thing has very brittle plastic.) While you could kick the SpinMasters version and nothing would happen to it. As far as sculpt, quality of materials, and playability, the 12" Spin Master's one that comes with the Flash and Batman 4" figure is the best one. If one KO company scaled up the 12" Spin Masters to McFarlane size and offered it for $80.00, McFarlane would have to run a fire sale on this brittle batwing.

Thank you for your amazing video and review. Constantly watching these Batmobile/wing unboxings on KZfaq...just so happy for Keaton return and these lovely figures and vehicles. Thank God for Andy Muschetti (director). Nice to see modern version of 1989 Batwing but still much the same too.

You need a big yellow oval to go as a backing to it looks like the bat symbol on your wall. Or the moon, like we saw in the 1989 film.

Love the display, amazing piece for your background! Glad it worked out how you originally planned to display it. I kinda want to get a huge moon poster for the background for my batwing 😅

They knew what time it was, bring the wall mounts 😅

Very nice piece. If I hadn't decided to throw in on the Ramen Racer I would have picked it up.

It’s so cool, really awesome display piece, but it’s soo expensive, I’ll have to pass on it but it’s dope

I love the sizes of the big Batwing and the 22" batmobile. I don't care if batmobile looks cheap, I need that baby. Obsessed to this day with Batman 89 and the Batwing and batmobile... beautiful design car and jet from Flash and Batman. Batman Forever also nice Batwing, but still love the first film's vehicles. The Batmobile felt like it had a life of its own...sequel vehicles looked so childish lol. Tumbler never felt like a Batman vehicle, but still good.

That batwing is sick

At first i thought people were crazy paying $250 for this, but considering the details, no screw holes...I jumped in the crazy people boat. 😅 I paid more for my Hot Toys Batman so I can't argue with the price. Great review btw, thanks for keeping it honest.

Looks great can't wait to get mine should be here in the next couple of days!

well done, good job. i am going to stick mine at an angle in the room top corner of the wall

This and the 89 batmobile are the best vehicles mcfarlane has released so far imo. Batwing is way out of my price range, but its so dope.

it for sure looks better and is bigger than the spin master and I want to pull the trigger and buy it but even with the promo code I can't stop doing the math on the spin master, even with the most minimal amount of customizing(masking and flat black priming the canopy) it looks a million times better and only cost an extra 4.99 for paint and hell you can use the box to fill in the bottom of the wings and they'll be more than enough spray paint left to paint the bottom of the wings flat black then throw about 5 minutes worth of dry brushing and it looks just as good as McFarlane's for an extra 20 buck max $50 total minus the cost of the figure it comes with!

Sweet! 💯 🔥 looks awesome on the wall bro!!!

I agree that it is going to cost much more down the line. The wall mount is a great idea but I do wish there were lights and sound for the price. I haven't seen a way to open it up like you can with the spin master or the Batmobile to add lights but it is a very cool piece. Like the video.

Mine comes in Saturday! ----- thanks for sharing

It's amazing! But I think is just for trully fans of Burton's Batman because of that price and size

I pulled the trigger on this one today. It hurts because I dont think its totally worth the price of £189 here in the UK, but already I have seen it for nearly double that on ebay. I'm getting it as A) a piece of art on the wall and B) for nostalgia reasons because I originally go the Toybiz 89 batwing for Christmas as a kid and loved it. Shame this one doesnt come with sucker bullets lol. Also planning to do a simple repaint in the summer as a fun project.

Josh, I was anticipating your review of this bad boy and you hit all the aesthetics and functionality of the McFarlane Batwing. It would of been nice to see it against some various sized DC figures for scale, Robin, Bane, Darksied, Flash, and maybe some Spawn figures as well. But you did do a tutorial on dispaying it which is more then I expected (not a slight just a different helpful). Also the light idea was cool. 👍✌️

It looks cool. I won’t be getting it due to space issue and the price. It’s like hasbro pulse prices. I do understand why it’s so expensive, as you mentioned. Maybe I’ll get the spin master one at some point.

Looks great on your wall. I haven’t opened mine yet but it too will be going on the wall.

Honestly, I just don't dig soft goods on my figures. Gimmee that molded silicone cape any day!

Great review! Got the Batmobile but passed on this because of the $$$. Also already have a LEGO Batwing on my wall

Yes I was waiting for this review I love the fact you can mount it on the wall!!🦇

Looks awesome, but i think overall i prefer the look of the 89 batwing. Thanks for the review man😁

Another great video! And looks amazing on the wall. I just have 1 question can the wings and fins come off after you’ve put them on?

IF I can get this BATWING AT GOID PRICE I will buy it

The most impressive than the Spin Master by far!

Awesome.

Yep I pulled the trigger on it. I love it!

God I need one

Cool, I think the 1989 Batwing looks better. I'll pass on this, it doesn't have action on the missiles & the eject by doors where The Flash was ejected. I wish the body's die-cast- not a fan of plastic. God bless.

I say 250 never and pay way more after because it is not available over seas so we are left out anyways….

Awesome. i'm so happy you showed it mounted. did the punch15 code cover shipping completely?

Really looks amazing, cool review dude 👍.

Is your base wobbly while mounted, my screws went in flush and the raw plugs but the base wriggles whenever I move it?

What is that joker monster truck in the back ground?

What is the size of Batman action figure? Is it a 4 inch action figure?

👍

I need it.

The batarangs what are they from?

Where can i order them

🍻

Josh, I am so tempted. Josh, please. Josh…

great figure, but $200 is kinda too much.

Man I can't wait to to never get this in Australia. McFarlane only gives a damn if you're American these days. Last wave I was able to get was Arkham wave. Been collecting for 3 years and it feels like shit.

Nah they gotta put a little more effort for that price

No guns

punch15

Nah man. This much for a hunk of plastic, with bare paint and no diecast?

NO led cluster ? ill pass ... cheaply made , nothing beats the animated version

Great look!