DCC decoder install in kato N Scale glacier express
Рет қаралды 4,604
7 жыл бұрынI install a DCC Decoder into the Kato Glacier Express engine and do a quick test run.
@edwardasmus2705 6 жыл бұрын
Thank you very much for your extremely useful video. I found that with my Kato Glacier Express and DN163K4A that I could remove the original board and install the decoder board without removing the light pipes. In addition, there was no need to add solder to the back tabs. Fit perfectly and worked fine. Thank you again!
@edwardasmus2705 6 жыл бұрын
I spoke too soon. I did have to put solder blobs on the two contacts at the back of the decoder! I wrote my first response prior to putting the cab shell back on. As soon as I did that, the decoder board without the solder blobs was pushed down sufficiently so that absolutely nothing happened. Now all works fine. Thank you again for your video. It really helped!
@SpecterSix 3 жыл бұрын
Hello I'm looking to get this locomotive but before I do I would like to know if there is space to install a sound decoder? You think it would fit? Thank you :)
TrainspotterTV
Рет қаралды 337 М.