DCC++EX: A Cheap DIY DCC System?!?! This is a Model Railroad Game Changer

Рет қаралды 81,959

3 жыл бұрын

#modeltrains #modelrailroad #modelrailroading #DCC #DCC++EX #DCC++ #DIY #modeltrainset #trainset #modelrailroadlayout
Welcome back everybody! Today is a tutorial that I have been researching and working on for many months. DCC++EX! This is a huge deal in my opinion and all the credit has to go to the guys who have made this possible. My research into this consisted of understanding the construction and implementation process as well as making sure that you could too. This is an amazing DIY system that I now have controlling 2 model railroads!
DCC++EX Website
dcc-ex.com/
Arduino IDE Download Page
www.arduino.cc/en/software
Original DCC++ Tutorial
• DCC for less than $45!...
Parts
Arduinos
UNO
amzn.to/3gXrd51
MEGA
amzn.to/35XFLLG
Motorshield
amzn.to/3A3xkMP
9V Power Supply (Arduino)
amzn.to/2TbL1bV
12V 5A Power Supply with adapter(Motorshield) Cut the VIN power trace before connecting or else you will fry your arduino.
amzn.to/3xSKryq
Wifi Options
Makerfabs Wifi Shield (Best)
www.robotshop.com/en/esp8266-...
ESP-O1 Wifi Module
amzn.to/3x2Zplk
Wangtongze Wifi Shield
amzn.to/2U3FB2M
Extra wires to make it all work
amzn.to/3zX2cOW
Check out my Facebook page
/ diyanddigitalrr
Support the channel on Patreon
/ diyanddigitalrailroad
Check out my Instagram
/ diydigitalrailroad
Check out my Etsy Store
www.etsy.com/shop/DIYandDigit...
N Scale Train Set
amzn.to/33TzsbS
HO Scale Train Set
amzn.to/311N17g
O Scale Train Set
amzn.to/3lAZCGu
G Scale Train Set
amzn.to/312Cn09
I do a lot of 3D Printing. Here are some great printers
Anycubic Photon
amzn.to/2SAnJZn
Creality Ender 3
amzn.to/3lkMogX
Camera I use
amzn.to/2SyuPh5
Support the channel with some Merchandise!
teespring.com/shop/diy-digita...
Connect with me at ddrrcommunity@gmail.com
I do a lot of 3D Printing. Here are some great printers
Anycubic Photon
amzn.to/2SAnJZn
Creality Ender 3
amzn.to/3lkMogX
Original Prusa Mini
shop.prusa3d.com/en/3d-printe...
Elegoo Mars
amzn.to/386NZSa
Anycubic Mega Zero
amzn.to/3mHfdpi
Qiditech Shadow S 5.5
amzn.to/3cZl059
Samaritan’s Purse
www.samaritanspurse.org/
Camera Used
amzn.to/2X87yWR
“The godly may trip seven times, but they will get up again.
But one disaster is enough to overthrow the wicked.
Don’t rejoice when your enemies fall;
don’t be happy when they stumble.
For the Lord will be displeased with you
and will turn his anger away from them.
Don’t fret because of evildoers;
don’t envy the wicked.”
Proverbs 24: 16-19 NLT

Пікірлер: 219

@llanburywellsmrc 3 жыл бұрын

This is blowing my mind! This is amazing. Thank you so much for making me aware of this.

@RonsTrainsNThings 3 жыл бұрын

Great update, Jimmy. I'm building a second switching layout and plan to use this to power it. Thanks for the great explanation.

@JointerMark 3 жыл бұрын

Thank you for posting this! I have been dealing with DCC++ for a while and am similarly impressed with this project.

@carlosavena6376 3 жыл бұрын

thanks to Dcc++ i was able to finally get my analog locos into DCC which was a real game changer for me. Also a big "THANK YOU" to you for bring this to the community! and thanks to Ron's train N thing for invite us to this amazing channel - Cheers from BA

@NottsBobUK Жыл бұрын

Thank you for the Video Jimmy. Loads of info, I'm pretty exited and can't wait to find out more.

@mattw9667 2 жыл бұрын

Big thank you Jimmy. Got my wifi board in the mail yesterday and after a trouble free 45 minutes, dcc++ was gone and I was running my first engine through my phone. Big smile on my dial! No more running from my laptop to stop an out of control train!

@medwaymodelrailway7129 3 жыл бұрын

AWESOME!!! Keep up the good work .Hope there more to come.

@Phantomwerkz 3 жыл бұрын

The price point of entry is what drew me towards this system as I'm getting started with FreemoN. This was super easy to sit down and configure and I quickly had my first train running as a test using the web based controls. Can't wait to fine tune and expand this system as my system grows. Thanks for sharing... absolutely agreed that it's a game changer setup and the DCC++EX groups support and information is great!

@orthane4262 3 жыл бұрын

Thank you for this video! It is the perfect solution to run the layout that I am currently building in a coffee table.

@dexs-lab 3 жыл бұрын

Woot thanks for the Feature

@ulceoktrivia5564 2 жыл бұрын

This tutorial is very helpful for me. Thanks Jimmy

@RocktCityTim 2 жыл бұрын

Thanks for pulling all of the parts into one source!

@needs2quit1atgmail87 3 жыл бұрын

Ok im going to order one right now! Thanks

@iannarita9816 Жыл бұрын

I will get back to this when I'm building my railroad. It is intriguing. Many years ago I was an over the road truck driver. I had a railroad in the top bunk. Rather then use a conventional power pack, I got a 2n3055 transistor, heat sink, A dpdt switch, and just used the trucks 12v power out of a cigarette lighter. Simple stupid effective. This looks like worth exploring. Thx

@donaldkormos5529 3 жыл бұрын

Nice video Jimmy!!!

@thadmacmillan 2 жыл бұрын

Great video! I'm officially motivated now.

@deshkumar9 Жыл бұрын

Thanks for the video and such a good explanation.

@michaelharrison8727 3 жыл бұрын

Just found your channel. As a person that loves trains and coffee I really enjoy your content. Keep up the good work!

@microrails 3 жыл бұрын

Having both Digitrax, and NCeDCC, I’m getting interested in this DCC System. Thanks for posting. always trying to keep my mind active.

@FredE528 3 жыл бұрын

Excellent video. Thank you for doing this. I’ve used DCC++ EX on Arduino with my win10 laptop for a while. It connects with JMRI to run multiple locos, turnouts and sensors without problems. I got the WiFi card from England and paid more for shipping than the card itself. I have not tried to install the WiFi card yet and this video will help me.

@TheMotorChannel 3 жыл бұрын

This is a great project!

@michaelpfister1283 3 жыл бұрын

This is amazing. Setting up and wiring DCC and power are the two things I am most daunted by, honestly, but this looks like FUN! And the DCC++EX site has great instructions. And ... well, lower cost is always better. And I have a nice little laptop lying around that I can use as a support PC to load JRMI and do updates with. Awesome video and thank you Jimmy for bringing this to us!

@kensomething379 Жыл бұрын

I have a background in Robotics and process control... from 1987... I have no idea what he's talking about. Overwhelming!. I haven't touched electronics since that course, it was brutal and completely turned me off. Spent my teens fiddling with electronics, I have about 10 years experience, but this?!?

@WallEYoutube590 2 жыл бұрын

I followed this video and was successful! I used the ESP-01 with a breadboard to share the 3.3v power and its definitely flaky but it works. I ordered the wifi shield to hopefully resolve that rather than using breadboard power supply. Thanks for making this video!!!

@HOscaleNZ 3 жыл бұрын

Awesome! Great guide. I've had a small problem with the decoder I used (Digitrax DH126) but there's a lot of help in the forums / Facebook groups etc.

@rjl110919581 3 жыл бұрын

thank you share great ideal video from Australia

@anfieldroadlayoutintheloft5204 3 жыл бұрын

good vid jimmy keep posting vids up

@kenr86 3 жыл бұрын

Great explanatory video, I'm in the process of setting up a DCC++EX setup. I managed to get the MakerFabs wifi shield through eBay. Once I've got things going I will see about sending some photos for your Virtual train show.

@4everdc302 3 жыл бұрын

Very intriguing. In the fast lane for us yet. Where only sketching out our new 5th line for DCC. Leaving the other 4 DC. Thanks for posting🚂🇨🇦

@SD45-ET44AC 2 жыл бұрын

I'm glad you have convinced me to just support you, watch your videos and not build a darn thing. I am so lost, I think when I saw what you said is a raspberry pie and something that my wife baked for dessert. Best of luck!

@edwardaudet8367 3 жыл бұрын

Jimmy, You have out did yourself again with this video, it's great as usual. I have a dcc++ and have played around with DCC++ EX both of which I have found to be excellent. I have a Raspberry Pi 4B with JMRI connected to the DCC station and I login in with engine driver, or my wife's old I-Pad using the one for apple. I normally use Pi-sprog on the layout when I run DCC, or program my trains. My layout started 26 years ago as DC which I still use. I have double poll double throw switches . The layout was originally setup up for 4 DC throttles. All are either kits or ones I built from scratch, When I went to DCC, I changed the DC side to 2 throttles, this way I can setup the DCC to run on one switch and use the other to hookup to a programming track. It's a little complex but I have all the switches marked as to what they do. The only thing I found with DCC+ + or EX is I can not program trains with it. But that could just be me. My background was electronics and I did do some programming. My last gig was working on Cisco Routers and Switches for a major bank.

@andycrawford9870 3 жыл бұрын

Looks pretty straightforward, if I only understood even a part of that LOL. Maybe one day.... I admire your easy step by step approach.

@Luke-20-OLT 2 жыл бұрын

thank you!

@kebbin8232 3 жыл бұрын

Hey Jimmy, top video mate! And a very deserving plug for the DCC-EX team. They're working hard on this. Please correct the Arduino IDE serial monitor baud rate you mentioned: it is 115,200. Not 112,500 as you read out. New subscriber here! 🇦🇺🤠👍

@bobsinclair9886 Жыл бұрын

thank you i needed a better understanding i so need more information thanks

@loispadgett6306 3 жыл бұрын

I have just DC and like the hands on running of my trains. Not planning on getting any DCC trains but this was fun to see how you setup one for DCC++EX. 🚂🚂🚂💖💖💖 GOD BLESS 😊

@PatrickMcNealMakesThings 3 жыл бұрын

I used the ESP-01 module when I built my setup a few months ago, and it has performed flawlessly. My layout is in the garage and it boots up and is ready to go in just a few seconds. I use Station mode; AP mode works fine, but I quickly tired of changing my phone's Wi-Fi network every time I wanted to run trains.

@Shane-Singleton 2 жыл бұрын

I'm using station mode as well. For similar reasons. Can keep my phone on my normal home WiFi network.

@daveskinner5131 2 жыл бұрын

Why not just get a Third World donor fone? As long as it will hold Engine Driver it should work. We are using junkers on our portable club layout now.

@danzo5521 Жыл бұрын

On your ESP-01 module, where does the ground wire connect to? Thanks

@PatrickMcNealMakesThings Жыл бұрын

@@danzo5521 I'm pretty sure it is the GND terminal.

@danzo5521 Жыл бұрын

@@PatrickMcNealMakesThings thank you, I rewatched the video and figured it out, thanks!

@Hal-Zuzzu_Model_Railway 2 жыл бұрын

I'm looking to get this for my layout, as a second controller. I will be using it for my accessories and programming track. I will use my z21 Start for track power only. Looking forward to ordering mine :)

@rebelroar78 10 ай бұрын

Ugh. This video came out 3 months after I spent 60 hours building a crude DCC system using a PIC16 microcontroller. But I was doing it as an exercise to learn more about microprocessors and assembly language. I didn’t even control locomotives; I just switched LED lights using the DCC protocol. I could’ve done the same thing using C and UART but then I wouldn’t learn as much about the microprocessor.

@guzzialfa 3 жыл бұрын

I first heard of DCC++EX from Tom of Tom's Trains & Things. Got some of the parts right away but let them languish. Thanks for the excellent refresher. Hopefully, it's the extra push I need to get things going again.

@DCCEX 3 жыл бұрын

Lots of help to get you going, just ask! :)

@trainguy0 2 жыл бұрын

I used your recommended parts. Got it all together. Nice instructions on video. Loco wasn't working. I forgot to turn on track power. I am using for portable program and test track.

@chazco 3 жыл бұрын

Working on my own DCC++EX - I have the mega and motor shield, power supply and power for the motor shield -- now need to get wi-fi shield. And DCC locos. DOH

@melkitson 3 жыл бұрын

This is a fantastic video and introduced me to something which I did not know even existed. For me the next step would be to introduce affordable decoders which could be fitted to N gauge locos from the 1990s and early 2000s. That would be an amazing game changer. Thanks so much for your efforts and for sharing.

@DCCEX 3 жыл бұрын

You can install decoders, even sound decoders in N-Scale locos. In some cases, you have to do machining though. You have to take it to someone who can route out a space for a speaker. You can make decoders yourself too. Geoff Bunza has a board you can solder components to, but to makes something really small, you have to have surface mount components and that is usually not something the average Tinkerer can solder or bake. But Engineer level folks might tackle that. There are some non-sound decoders from China that are dirt cheap.

@RoamingAdhocrat 2 жыл бұрын

I had a DCC++ (not EX) layout which used a second Arduino to provide the throttle controller - no PC needed (not even a Pi)! And it could program, too, in a clunky but functional fashion.

@michaeldrummond1591 2 жыл бұрын

Hi as a disable. person with a limited budget this is such a amazing solution. for my needs thank for time given in help so many kind regards Mike Cambridge U.K

@iannarita9816 Жыл бұрын

Know the restrictions on being disabled on limited budget. I was fortunate enough at the beginning to have a little money to make purchases. Have trains, have track and an MRC throttle. Now all I have to do is get my sons to set up a train table. I've got a decent amount of stuff to get gping , just no current operating table. It takes time. 😎

@MXTuber3000 2 жыл бұрын

Would love to see you revisit all this with the latest DCC++ release and JMRI.

@HHExpress 3 жыл бұрын

Hello Jimmy, this us just what I need for a test setup. I now need to find a good decoder which I can build in to one of my model trains in n scale.

@ChrisPackham1 2 жыл бұрын

I used a MEGA with builtin esp8266 wifi, took a little effort to setup but works great.

@BananaArmsMcNess 3 жыл бұрын

Good video! There are also Arduino Megas for sale with a built in wifi module that may be a bit easier to set up

@AndrewH561 Жыл бұрын

Thanks for the video and information. I currently use a Raspberry Pi with a pi-sprog3 plus running JMRI but I am always interested in trying out new ways of controlling my railway :-) As I need to be able to program my decoders I will probably continue to use JMRI but will be interested to see how DCC++Ex develops. All I need to do now is see if I can find the various items needed over here in the UK :-) Thanks again and thanks for Bible verses.

@scottericcatalano596 3 жыл бұрын

Also to note you can only have 4-5 wifi connections at any given time.

@hctreintje 3 жыл бұрын

Fantastic video thanks for placed on KZfaq and good explain !! 🙏🚂🚆😎. HC Treintje Herman from Belgium 😁😀🚂🚆😎.

@midsomerrailwaynscale 3 жыл бұрын

Hi Jimmy DCC++ EX is Fantastic i have been using it and the different version and currently . While i am a Tech guy . I started using with Uno and Now with the latest version i am using a Mega and you Engine Driver and built one for my mates layout the only problem is Living in Australia It has been hard to get MakerFab WiFi SHield So i have been using Esp-01 it is very powerful and i love using My DCC++EX main on my mates track as i have mostly DC N Scale and only a couple of DCC Locomotives But i have modified my layout so 1 track is DC and the other is DCC . I want to say thanks i Use your design of the Station stop Arduino on my DC and i have IR sensors around the track to control the speed of my DC I am not good a programing but i can read and modify code.. I do enjoy your videos Thank you Regards Greg

@HumancityJunction 3 жыл бұрын

One day I am going to do this, just for fun.

@karlhutchings4175 3 жыл бұрын

Thank-you for this video; this is a really interesting system. The major draw of the DCC++EX system for me is the ability to build it myself; I like building things, so this becomes another aspect of the hobby. The price is nice as well of course, and I suppose it also means I wouldn't be locked into proprietary components. I've seen and read a few other things about this (and DCC++) and people frequently refer to "limitations" of the system, but people don't talk much about those limitations. Do you suppose you could do a video on the (current) limitations of the system? For me, it's just as important to know what I *can't* do.

@scottericcatalano596 3 жыл бұрын

As one of the developers mentioned wifi is limited to 4-5 throttle connections connected directly to the command station....unless you use JMRI then you can have more....the other limitation is the memory and ram of the Arduino itself....you cannot use commercial DCC throttles with this system....that's a few and we are working on ways to solve that.

@richardmartin4479 2 жыл бұрын

@@scottericcatalano596 still... quite impressive.

@GuyMasong1 3 жыл бұрын

The DCC++EX installer is much easier to use than using the arduino editor. I also recommend the combined mega with wifi board, no jumpers needed unless you add a display.

@DIYDigitalRailroad 3 жыл бұрын

Yes the automated installer is much easier, but after consulting with the DCC++EX guys. It’s still got some bugs to work out, which is why I did the IDE setup.

@Trains-With-Shane 2 жыл бұрын

Looks like the motor shield I got is DOA (no lights or anything) . Will have another one here in a day or two hopefully.

@christopherpretzman9601 3 жыл бұрын

Thank you for this great video! This looks like its going to be somewhat challenging for most folks to undertake. I am excited about the possibilities. Would a raspberrypi zero W be able to provide the wifi? I guess you would just use jmri at that point anyway.

@DIYDigitalRailroad 3 жыл бұрын

I’ve actually tried a raspberry pi zero w with JMRI. It works but it’s pretty slow. If you can upgrade to the RPi 3. That works great!

@ChristCenteredMinist 3 жыл бұрын

The arduino can run on 12v too, just use security camera power splitter

@lauriepocock3066 2 жыл бұрын

I brought a DCC loco off of EBay for £12 ~$15, its fitted with a Hornby R8249. When I first got the engine and opened it up and it was swimming in oil, but I powered it up on my dc track, and it ran?? But I noticed that there was smoke coming from one of the decoder components. I have cleaned it up and replaced the decoder but before fitting the new decoder I shorted out the pins to make it dc only and it will run around the track quite happily with the power supply set to 4-5volts, and its got quite a lot of power. I brought a elegoo mega and a cheap motor shield, cut the vin track and wired up a length of track to B+&- terminals and when I asked it to detect and the decoder, It gave me a choice of several, I choose R8249, and it made an entry in the roster, but I an unable to make the loco move using a throttle, I got error code 308. Thinking it may be due to the motor shield I brought a Deek-Robot motor shield but forgot to cut the vin before using it. Now I have a problem, have I fried the mega, the loco moves three four times as before but then gives me error 308, or do I have a problem with the loco, it rings out from the decoder pads back to the motor shield?

@DIYDigitalRailroad 2 жыл бұрын

Hmmm. The deek robot shields are solid. It may have fried your board though. I would either cut or bend the VIN pin on the shield to make sure it doesn't happen again.

@janeswift9961 Жыл бұрын

Despite having a Z21, I'm going to have a go at this especially as I am pretty comfortable with coding. My only concern is track power. OK there are a few boards that can deliver hefty current, but I would prefer to fit boosters. Do you know if it is possible to piggy back or stack multiple motor drivers? What other options might there be. My basic research has only unearthed solutions that go way beyond my comfort zones.

@ronwolak4069 Жыл бұрын

Hi Jimmy, thanks, great vid. Question: can I connect all in the same manner to the Märklin 3-rail AC system? Thanks!

@lluisvila9231 2 жыл бұрын

Awesome video! I have an old analog train layout. Is there any easy way to change to DCC? Thanks

@EsotericArctos 2 жыл бұрын

What are the main advantages, other than the WiFi support, over DCC++ ? What are your thoughts on just getting the Arduino Mega with the ESP8266 built onboard? I understand that can work and would eliminate the extra shield or flying wires for an external ESP8266 chip.

@thelittlewesternmodelrailway 2 жыл бұрын

I've been binge watching your videos for some time now and finally got my Arduino items to try DCC++/DCC++EX! I have one question, do you need a mega for the MakerFab WifiShield configuration or would a Uno R3 do? Thanks in advance and happy modelling!

@DIYDigitalRailroad 2 жыл бұрын

Hello! You do need an arduino mega for the Wi-Fi setup

@danielbardiaux8343 6 ай бұрын

Good evening I would like to know if it is necessary to wire the Wangtongze Wifi shield before downloading the DCC++EX program. Thank you for your reply.

@kaustubhponkshe6186 Жыл бұрын

Can I use 15volt 5A power supply for motor shield ?

@davenichols317 Жыл бұрын

I'm about to start converting my DC system to DCC Ex following your video on this subject but I have a few questions. My N scale layout DC system with five main loops, a number of sidings and a turntable using a separate DC controller for each of the five main loops and isolating switches for sidings and turntable. My questions are going to DCC Ex do I just parallel up all loop feeders maintaining same polarity? The main layout is approximately 8X4 feet, each loop is probably about 20 feet. Also what size power supply would I need to probably run about 4 engines at any time? I would appreciate any advice in these areas. Really enjoy your Videos and advice. Thanks

@mattw9667 3 жыл бұрын

Thanks Jimmy. Awesome instructional vid! Did the guys at DCC++EX happen to mention anything about using this setup with more than 1 throttle/phone at the same time? Running two locos each with their own throttle.

@DIYDigitalRailroad 3 жыл бұрын

Yes! Max of 4 to 5 connections.

@DarranWiltshire-nh4bq Жыл бұрын

@diydigitalrailroad, do you have a working link for the motorshield to use with the Mega? The link goes to a digital camera lol. Also is there a way to run more than 2 dc motors or is each setup restricted to just 2dc motors and thus requires multiple standalone units to control more?

@stevewelton9936 Жыл бұрын

I can't get dcc++ working, did as per video, engine goes slow around test track, jmri looks like it finds the loco but no control, help

@paulhargreaves1497 2 жыл бұрын

This is awesome (I'm planning a Swiss N Layout). One question.......what about electrofrog turnout polarity? With a point motor, can DCC++ change the polarity? Lots still to learn! PS : Subscribed!

@davidorr8682 Жыл бұрын

Jimmy, thanks for making these videos, they're very helpful. If you're still reviewing comments on this video, I have 2 questions. I'm trying to set up an Arduino Uno DCC++ command station, for use with a laptop for programming DCC, and a DCC-EX wireless command station with an Arduino Mega for use with modules. Q1: For the DCC++ programming setup, I believe the 9v power supply for the Arduino Uno is not required because the Uno is powered by the laptop via the USB port? I'm sure the guys at DCC-EX say don't use both? Q2: I've loaded the latest sketch to the Uno, connected a 13v 1.2a supply to the motor shield, connected the Uno to my laptop via the USB port and wires from the motor shield to my ops track only (A). But I have no lights on the motor shield. I tried a different Uno with the same results. I tested the power supply - it works ok. I tried a 3d Uno, an Elegoo Uno but, even though I have lights on the motor shield for the ops track, I also have a dim light on the negative connection (B) with no wires connected. And it still doesn't operate? I can't get JMRI to talk to it? But with the Elegoo unit, power is getting through to the track because the sound and lights of the loco are on? Any idea what the problem is? Do I have 2 failed Unos? Do I have a failed motor shield? Is there someway of testing the motor shield without the Uno? Sorry, that's more than 2 questions- lol.

@donaldkormos5529 3 жыл бұрын

In my DCC++EX experience, if you connect Arduino Uno or Mega to computer using USB connection for JMRI you don't need to power Arduinos with external power supply. USB 5volt DC power seems to be enough. If the computer has Wi-Fi connection to home wireless router, JMRI WI-Throttle works very well with Android Engine Driver on a cell phone. Then both JMRI Operations track and Programming track outputs on the motor shield are available ... maybe these could be subject of another video.

@scottericcatalano596 3 жыл бұрын

Throttle options will be a subject of another video.

@DCCEX 3 жыл бұрын

While many people don't want or need the complexity of JMRI to just run trains, there are obviously a ton of serious railroaders who want all JMRI offers. We cover that on the we page. You don't need a WiFi board on the CS at that point, you use the WiFi in the computer running JMRI and connect to that. Be sure of your power requirements when running off USB power. It DOES work fine for probably most cases, but both the USB port on computers and the USB circuitry on the Arduino are limited to 500mA. If you had a Bluetooth or WiFi board on there or a lot of sensors and outputs connected directly to the Arduino, that might not work. The Mega can only take 800mA anyway, so the extra 300mA would only matter to someone with one of the situations I mentioned.

@donaldkormos5529 3 жыл бұрын

@@DCCEX All true ... but sooner or later model railroaders need to change CV values ... like when you buy a new engine preprogrammed with address 3. For myself, that's why I installed ... and learned the little I know about JMRI ... for DecoderPro. My experience so far is that DCC++EX works very well with DecoderPro and a programming track which for me is essential.

@DCCEX 3 жыл бұрын

@@donaldkormos5529 I agree. And I like JMRI. But I do want to mention you can do all that without JMRI. You can program CV's right from a serial monitor in DCC++EX if you like, but some phone app throttles support CV programming as well. We are adding CV programming and turnout control to WebThrottle-EX, so tools like that can be used just as something to program locos even if you don't use them to control them. As much as I like JMRI and think it is extremely powerful, with power and options comes complexity. Plus, it is Java. it has a terrible user interface, is very convoluted, and has a steep learning curve. The page read feature is one of the nice benefits though! We've sped that up considerably. We do write code updates to JMRI as we come out with new features, so I'm not knocking it, just acknowledging we need an "I just want to run trains" (aka Conductor) solution.

@norliasmith 5 ай бұрын

I run 12v to the computer and cut the vin trace on the motor shield and run it on 15v.

@prototype_pandad6536 2 жыл бұрын

Considering I was thinking about shelling out $$$$ for a Digitrax Zephyr on my small N scale setup; this is amazing Would you setup a discord or something so we can pester and ask questions? ive been wanting to get DCC but cost has been the killer

@fruehauf01 3 ай бұрын

What is the easiest way to get the ESP-O1 Wifi Module working? like a step by step. I'm assuming I will need the Arduino IDE to program with?

@mattlawson7779 Жыл бұрын

I don't understand. Can I use an Ethernet shield? Or, does my phone connect directly to the Arduino, and not through my network?

@kaustubhponkshe6186 Жыл бұрын

It worked for me. But not able to add roster in egine driver

@rondemeyer1735 2 жыл бұрын

PS when uploading the file to the Arduino Mega there was two green leds one was flashing until the sketch was done uploading and now there is one led a steady red near the reset button

@bigsby2076 Жыл бұрын

How did you make the Y adapter for the ESP-01 jumper?

@sno0pers Жыл бұрын

Awesome, thanks for that ! What is the app name pls ? Can't find it on play store. Thanks !

@expatvoyageur Жыл бұрын

Hi, I using my train model to bring food to the table in my restaurant, but the guy that programs our software did failed and we have to many bugs to continue to use his software. we need to start from scratch and the solution you give in this video seems interested. Is it easy to link this DCC system to a custom app that will be able to select a specific train, send it to a specific table, stop 25 seconds and comeback to the station. It seems simple, but apparently is not. Do you know how much it should cost to program DCC++Ex to do such a thing?

@johnbrogan6583 Жыл бұрын

what about accessory modules?

@scottpeal60 2 жыл бұрын

I see you have Kato double track. Can you please make a video on how to wire dog bone with turnouts with DCC++ Ex and reversing loops at ends?

@soup0916 Жыл бұрын

Need a little more help here, not being an electrician and new to these little circuit boards I'm trying to determine how you know if you cut enough of the VIN Connect to isolate the power from frying the Arduino? I have used an Hobby knife to cut between the contacts but not sure how to test it.

@Crlarl Жыл бұрын

The RP2040 isn't a mini computer, it's just a microcontroller like the Arduino boards use. It's made by the Raspberry Pi foundation and is quite capable.

@logisticanutricionale286 Жыл бұрын

Good Morning, after putting this wifi card that you show in the video is it necessary to have some programming for it or not, just connect and connect the wires?

@brycejohnson3533 2 жыл бұрын

So what changes would you make to the hardware and wiring when doing this on an h.o. scale layout? Should i use a bigger power supply? What size is too big? Also with a dcc++ ex setup do i need to wire the arduino to a buss and then run feeder wires every 3 or 4 feet to the track like a normal dcc setup? Lastly what if i need more power for my dcc setup? Can a power booster be added to something like this? Most of my engines are old athern BB engines that either have already been converted or im converting to dcc sound which draw a little more current then most of the newer engines

@Kevincsmith0708 2 жыл бұрын

A good 16 to 18vdc 4Amp+ laptop power supply works well with HO scale. Yes just to wires from DCC++EX terminal A {Main} to a normal DCC wiring Bus with drops every few feet would be preferred. Multiple power Motor Boards {boosters} are available like the IBT-2. for 5amp or more. Motor Board Boosters; dcc-ex.com/advanced-setup/supported-motorboards/index.html Visit us at DCC++EX Discord Server support discord.com/invite/PuPnNMp8Qf Regards, Kevin

@danielbardiaux8343 7 ай бұрын

Good evening I would like to know what replaces the Wifi card because on Amazon we can't find any more at the moment (Aruino Méga + schield motor and wifi). Thank you for your reply. Sincerely

@MalcolmCrabbe 2 жыл бұрын

What would be cool would be to have the ability to attach potentiometers like MiniDCC to act as a normal throttle rather than having to use a mobile phone app.

@corwin81 Жыл бұрын

How many HO locomotives can run with the recommended motor shield?

@fruehauf01 2 жыл бұрын

great video. i just want to know why at 6:30 you plug in power to the Arduino? i thought the usb cable would supply that

@kensomething379 Жыл бұрын

I have a background in Robotics and process control... from 1986...! Hated the course as did my classmates. Most of the profs were stumbling around just trying to teach us. Sometimes we had to correct the profs! out of 87+/- students to start, 8 graduated. I have no idea what is going on in the video. It looks like I'm going to have to do some research, just to understand. Once I figure out what's what, just from the comments, This looks like my best bet. By the time I add on some sort of screen, keyboard, etc I'm guessing, from the prices I've seen, this will STILL be about 1/4 the cost of a "DCC starter system" and from what I understand, will be better then the "chief" top end systems. I have a lot to learn (and not a lot of time to learn it, as in, life span, lol!) but looks like it will be worth it!

@gravesclay 3 жыл бұрын

A question about the motor shields. I want to run multiple power districts, and possibly use one as a reversing section. Any idea if there is a way to do this with a dcc++ / dcc++EX system? I heard the comment about boosters, I have a suspicion that you could just feed the track in to the h-bridge of another motor shield, but don't have the equipment to test that theory.

@scottericcatalano596 3 жыл бұрын

You can do that and you must specify the pins in the config file as well....as one of the developers I recommend joining the DCC++EX discord server.

@chriszalenski9443 Жыл бұрын

Instead of using a Makerfabs ESP8266 WiFi Shield can a ARDUINO UNO WiFi REV2 be used instead?

@johnfm2731 Жыл бұрын

I have to wander if the Arduino Giga R1 with Wifi and BT with the Arduino Motor Shield Rev3 would make a good combination for this build.

@kimhawtin 2 ай бұрын

Given none of the shields in this video are available any more, might be time for a refresh video on updated kit =)

@dave4821 Жыл бұрын

The DCC++EX command station was very appealing to me just starting out in model railroading. I am a goober at electronics, but your video instructions are excellent. Thanks. I followed your instructions and those of the DCC++EX website using an Arduino Mega R3, Arduino motor shield, and Makerfab wifi shield. However when testing the locomotive using the JMRI and DCC++EX web throttles, all that I get is the engine startup and idle. Lights, bells, horn, movement, etc do not work. Not sure what I did wrong. My voltmeter says that the power to the mainline track is only about 12mV. I thought that my motor shield was bad, so I got another one. Same result. Seems that there is not enough power getting to the tracks. Any suggestions. Goober

@Greebstreebling Жыл бұрын

I'm completely new to DCC, but not to electronics/ programming. I think DCC uses Pulse width Modulation to supply power to the track, so you can't accurately measure the track voltage with a voltmeter. I'm sure others will chip in if I am wrong about this. Good luck.

@chriszalenski9443 Жыл бұрын

Well assembled my arduino mega according to this video an manually downloaded JMRI Cab Engineer onto my Android devices. Now I have a problem. I can connect once to my base station and when I shut my system down and try to reconnect I can't. I get an error basicaly telling me that the connection can not be made and I need to do something in withrottle to fix the problem but I can't find withrottle to fix the problem. Can anyone help!

@chriszalenski9443 Жыл бұрын

Has anyone used the Arduino with built in WiFi and how did it preform with motor shield? I thought an Arduino Mega had to be used due to power and current draw