Installing Scratch Made Hot Rod Floor Pans

Installing Scratch Made Hot Rod Floor Pans - 1927 Model T

Рет қаралды 47,884

4 жыл бұрын

In this episode the Model T finally gets some floors. This was my first time making floors from scratch so be gentle in the comments. Right from the structure, the trans tunnel and the sheeting all came from lengths of raw steel. After templating the floor with poster board, I transferred it onto sheet metal then cut it out. I fit the panels and cleco’d them down, then started marking the panels for bead rolling. This was my first time really using a bead roller so I kept it simple with evenly spaced horizontal beads. It turned out pretty darn good and the floor is extremely sturdy! The old hot rod is coming along day by day.
Thanks for watching and don’t forget to subscribe
Deboss International Quarantine Car Show #iqcs2020 Submissions
Tuner Taste Award: debossgarage.com/iqcs2020/ent...
Purity Award: debossgarage.com/iqcs2020/ent...
Factree Award: debossgarage.com/iqcs2020/ent...
Minty Award: debossgarage.com/iqcs2020/ent...
Send me your Junk
DD Speed Shop
Po box 42041
1881 Portage ave
Ferry Road RPO
Winnipeg, Manitoba
R3J 3X7

Пікірлер: 307

@moelacasse1376 3 жыл бұрын

I really like watching you work on the cars & trucks. You never give up working on the job you start God as bless you with lots of talent take care and keep up the good work .

@deanjohnson2249 4 жыл бұрын

8:47 I love it!!! You had to use a hammer to straighten the panel. Now that is definitely built not bought. I've Loved this channel for a long time and you never seem to disappoint. Keep up the great work.

@DDSpeedShop 4 жыл бұрын

hey thanks man! really appreciate all the support

@JeffCKeane 3 жыл бұрын

Sweet outcomes on all, including the bead rolling. Best way to learn: just start doing it if there are no instructions.

@stoveboltlvr3798 4 жыл бұрын

Looking good, plenty of support and stiffeners in the metal, keeping it clean and simple.

@DDSpeedShop 4 жыл бұрын

thanks buddy!

@youtubefilmvisionary67 4 жыл бұрын

Really liking the Floor work!...yes clecos are the stuff Dan!...they will hold anything in place for projects...I used them for years helping Build Aircraft where there mainly used...I've got some in my Garage & some saftey wire pliers& Cleco pliers very handy!...

@theozman38 4 жыл бұрын

Wow. That’s nice n clean. And very neatly done. Lots of care in it. Sometimes love is all ya need. A little Beatles music goes good for the soul. I did not know what a bead roller was. Now I’m educated about it. Nice touch. 😍👍

@doug.patterson4732 4 жыл бұрын

i like the fact that you never git hung up you allways bounce around any problem to git ur done

@scottlambert9008 4 жыл бұрын

You want to be top 25! You are definitely top 5! I truly believe you will build a over $100, 000US car soon!

@DDSpeedShop 4 жыл бұрын

thanks buddy! i dunno if i got those skills just yet

@mattmanley4666 4 жыл бұрын

My favorite channel out of all if them.

@garymccord4277 4 жыл бұрын

Coupe looks great and looks like plenty of leg room with flat on the floor seats. great idea.

@snoopu2601 4 жыл бұрын

I've been watching your channel for awhile now ever since I seen you at Halfass Kustoms like what your doing in the shop building on the low buck and using what you got. I'm not sub to your channel yet but on my T.V. when I'm watching KZfaq your video's all ways pop up and I watch the T-build. I already voted on HalfassKustoms Buick you have to admit that thing is badass but now that you say there is diffrent categories I can vote for your T and the 46-8 looks awesome to I have a 47 Chevy coupe

@JM-sb4nb 3 жыл бұрын

You are doing a great job. Thanks for teaching me too

@JamesDavis-to1hn 4 жыл бұрын

Your floors came out real good. The car is looking better and better.

@patrickharrand 4 жыл бұрын

Awesome job once again Dan. Thanks for sharing your skills and Garage Time with us.

@ericmcginnis9413 4 жыл бұрын

I worry about water getting up behind that rear pannell but then again it's not done and I'm only a few minutes in to the video so we'll see, but I'm sure you will take care of whatever needs done! You're videos are pretty inspirational my friend!!!

@DavidPerez-cd9tu 4 жыл бұрын

Good morning Dan Greta work you are a craftsman! Wish I could get motivated !

@vicwilton3754 4 жыл бұрын

Add a 2 inch extension on the top of your rear fire wall sticking above the package tray, so that when you put stuff up there, like cell phone or gloves, they won't fall off going down the road

@martinmayhem7122 4 жыл бұрын

You're making great time and progress! Floors are looking great! I like how you brought us along on the journey and explained it all well what you were doing. Thanks!!

@fitzeesfabrications 4 жыл бұрын

Moving along nicely. For first time you did amazing. We learn as we go. Keep at it.

@rayeddy528 4 жыл бұрын

Coming together nicely !! Thanks for taking us along !! I enjoyed the content !!! God bless you all !!!! Eddy

@johnhall1211 4 жыл бұрын

Floors lookin good!! Coupe is coming along nice!!

@philipchambers9309 3 жыл бұрын

You are doing great work on these timeless bodies, keep it up the skies the limits, enjoy watching you

@richc9503 4 жыл бұрын

Looking good! I wouldn't have had any idea where to start with this thing, thank's for taking the time to video, I can apply what I'm learning here to a lot of stuff.

@DDSpeedShop 4 жыл бұрын

i didnt know wherw to start either haha

@chevys10ray26 4 жыл бұрын

Floor looks great keep up the great work and stay safe...

@94jimmy5 4 жыл бұрын

Nice progress. Yes, clecos are very handy. Like most things we are new at, we get a handle on the process about the time it's finished. LOL!

@DDSpeedShop 4 жыл бұрын

haha thats my life

@lewisquick8394 4 жыл бұрын

Really looking good, can't wait to see the finished floor. You do great work by the way.

@DDSpeedShop 4 жыл бұрын

thanks lewis!

@tonygayheart3049 4 жыл бұрын

Looking great Dan. Watching stuff like this helps me have the confidence to get my car done one of these years haha

@rickhettwer854 2 жыл бұрын

Doing an awesome job on the floor assy. I'll be doing pretty much the same kind of deal real soon on a 39 Buick coupe. I hope mine turns out as nice as yours did. Thanks for sharing with us.

@chuckb.5076 4 жыл бұрын

Nice work. Thanks

@shanewright6958 4 жыл бұрын

It's coming along nicely 👍👍🇨🇱

@mikepantel6945 4 жыл бұрын

New tools, new skills... new parts. Looks good from here. Nice work Dan.

@maxbrouggy3126 4 жыл бұрын

Nice work, simple and clean

@punkbloater 4 жыл бұрын

Great work!

@LeeSmith-BigK51984 4 жыл бұрын

There looking badass keep up the great work... Saw your video and loved it.. I love seeing all these videos of the cars and such. It's great that everyone can still enjoy some rides and fun.. Good luck on the votes and keep the wrenches on turnin and the tires on burnin..

@dadpetty7998 4 жыл бұрын

Very nice, upping your game , nice

@richardsumner4214 4 жыл бұрын

Looking GOOD !!!! THANKS !!

@jamiewaddell1598 4 жыл бұрын

Looks brilliant dan I have just finished my floor on my model A coupe

@rogerwachal3718 4 жыл бұрын

Awesome work ,the floor looks great

@dordor718 4 жыл бұрын

Very nice job....coming along good...great to watch you as you learn...

@DDSpeedShop 4 жыл бұрын

thanks dennis!

@davecochran7324 4 жыл бұрын

Outstanding build I love hanging out with you watching the Dream come Alive. Love Your Show from Charlotte NC

@moosemechanical8525 4 жыл бұрын

Awesome Dan . That T is looking good !

@timcourt6194 4 жыл бұрын

look'n good Dan, can't wait to see the final product of this car..

@craigcaggiano431 4 жыл бұрын

Very cool details of the flooring and bead rolling of those panels. Looking forward to see how your going to tie the back panel and package tray together.

@pontiac6978 4 жыл бұрын

Looking good.

@davidingling9791 4 жыл бұрын

That's coming along pretty good

@chevrolet355 4 жыл бұрын

You, ole peg and deboss are the most mintiest Canadian's

@DDSpeedShop 4 жыл бұрын

thanks buddy! Really appreciate that

@chevrolet355 4 жыл бұрын

@@DDSpeedShop no problem! Check out my instagram (kuhn.man) whenever you are free. I am building a 68 Nova and a 56 chevy shortbed.

@toyfoxokey 4 жыл бұрын

I’m floored with your work. Nice 👍

@DDSpeedShop 4 жыл бұрын

haha

@toddyb1525 4 жыл бұрын

Looking awesome.......nice job :]

@wardsavacool7611 4 жыл бұрын

They look great!

@streetsnailspeedshop1896 4 жыл бұрын

Those roller panels turned out great! Learning more and more from these videos.

@DDSpeedShop 4 жыл бұрын

i was pretty stoked with em

@bbqlips 4 жыл бұрын

Looking super rad!

@N-Scale 4 жыл бұрын

I think the inside is progressing really well and great job on the rolling.

@d1ld 4 жыл бұрын

Looking great

@jp4121 4 жыл бұрын

Panels look GREAT 👍!!!

@Iann128 4 жыл бұрын

Looking great! For the first time with the bead roller looks like your getting the hang of it pretty quick.

@stushop3910 4 жыл бұрын

The bead roller works really cool

@chicolittle5409 4 жыл бұрын

Great job Dan! You may think that you are just learning, but you are teaching as well. If I had the Information that is available now when I was growing up, my life would have been a lot different. Thanks for what you do buddy.

@tommalchert416 4 жыл бұрын

Looking good

@homespuntools2115 4 жыл бұрын

Hey Dan floors coming along really well. Must be getting pretty itchy to hop in and take it for a spin. Well done!

@karlmills5668 4 жыл бұрын

Looking good, top work 👍

@reidbarnes9851 4 жыл бұрын

Floor looks great Dan.

@RandBLSWorld 4 жыл бұрын

Nice work dude ! That looks like fun !

@earlwoolery375 4 жыл бұрын

The floor is looking good!!

@johnpassmore8176 4 жыл бұрын

I think this build is going along great Dan. The floor is really coming along nice. Learning your knew toys is make this bead rolling a cinch next time it'll be easy

@Pedroisanickname 4 жыл бұрын

Good luck with your submissions!

@mathewruppert8682 4 жыл бұрын

These videos have been awesome to watch and see the progress I actually found your videos when looking up ideas for my Bel Air build I'm working on and got filled with ideas thanks for the videos

@waynedonaldson8287 4 жыл бұрын

Lookin good bro, always enjoy sipping the morning coffee on a Sunday and finding a vid of yours or Brent's and see how the Manitoba gear head brethren are making out on the projects this week. This time of the year you guys are an hour ahead of us so had time to check out a few ...busy week! Keep it up!

@randyburdick5951 4 жыл бұрын

Wow, looks great, you should be proud. Fab looks good, welds look good, can’t wait for the next video.

@DDSpeedShop 4 жыл бұрын

Thanks 👍

@dac2250 4 жыл бұрын

Looking good!!

@briquetaverne 4 жыл бұрын

Great progress. Soon you'll be making your own hood lid

@ASliceofWoodWorkshop 4 жыл бұрын

looks like that wheel on the bead roller was a great addition. Floor is looking great

@shartne 4 жыл бұрын

Cool you are having lots of fun. I would like to do one someday. You sure are getting lots of work done and it is looking really nice.

@mikesonneson2824 4 жыл бұрын

Enjoyed

@OutBoardTink62 4 жыл бұрын

Nice job Dan the beadroller works great makes your sheetmetal fab floorpanels look like factory floorpans.Looks nice and neat well done!Glenn P.

@DDSpeedShop 4 жыл бұрын

Cool, thanks!

@juniornunley5412 4 жыл бұрын

You may not have done this before, but I can't tell by looking. Great job, always love the videos!

@DDSpeedShop 4 жыл бұрын

thanks buddy!

@terryrenner8900 4 жыл бұрын

Excellent job, like watchinng

@kenswitzer4133 4 жыл бұрын

Looks like you have that roller going your way. Looking gooder👍🇺🇸🤙😃

@DDSpeedShop 4 жыл бұрын

Thanks 👍

@georgecassar9283 4 жыл бұрын

Good job buddy

@diggerspeedshop80 4 жыл бұрын

You already win in my mind! You got my vote.

@DDSpeedShop 4 жыл бұрын

thanks josh!

@genemorgan4828 4 жыл бұрын

Your doing just fine keep it up

@craigrobbins8981 4 жыл бұрын

The floor is looking great Dan.

@mikewinkelman7015 4 жыл бұрын

Looking sweet

@rexdrabble4988 4 жыл бұрын

Great job with the floor,you are going to end up being very good at this car building stuff. youll end up in business for sure!!

@jameshall4385 4 жыл бұрын

i’m floored at how good it looks.

@jbj27406 4 жыл бұрын

That steering wheel on the bead roller was a stroke of genius. I think you can cover that tunnel with three long strips that you can just scribe since the strips can form to the structure. Good work!

@johnwhelan723 2 жыл бұрын

Nice work

@chevymanbilly5698 4 жыл бұрын

Floor is looking good man really coming alone great

@scotttracey3748 4 жыл бұрын

Floors look great, You got my vote.

@brentmclovin9332 4 жыл бұрын

I like the time lapse. Starting to like the car 👍

@markduncan6690 4 жыл бұрын

I like this guys show!

@DDSpeedShop 4 жыл бұрын

thanks!

@novaguy8419 4 жыл бұрын

Looks good buddy.

@mattjenkins7216 4 жыл бұрын

Cool, making progress at a good clip.

@pauldeighton2398 4 жыл бұрын

Hi Dan . Looking good, love your attitude, would love to do the same but having a dairy farm never get time to play in the work shop on my car's. . Keep safe and I will keep watching Paul in the uk

@HorsepowerHeadquarters454 4 жыл бұрын

That floor looks fine! Hide some dyna mat in the hidden areas.💰

@MrBluetruck96 4 жыл бұрын

Playingwithhorsepower amen if seam sealer and dynamat can’t hide it you don’t need it.

@DDSpeedShop 4 жыл бұрын

yup itll get some sort of sound deadening for sure haha

@JeffCKeane 3 жыл бұрын

@@DDSpeedShop : Hope this note ain't too late: For SAFETY, you may want to put a heavier sheet of steel between you & Dani's BODIES and the FUEL CELL in the UNlikely, but ALWAYS possible Accident!! I recommend a thick panel of "safety" plate. (Think if it ever blew up!-short cash = life WIN!)It's usually the "other guy's " fault for staring at your awesome creation: steering where they're looking. My friend (dear departed) Steve built a remarkably cool T bucket. Drove it down to my apt in Revere,MA. To check it out...on my 21st (?)birthday- made my day!!

@markflores2362 2 жыл бұрын

I miss this car

@van-ubbe 4 жыл бұрын

Nice work man! Following from sweden 👍🙂

@cowboychevyschneider 4 жыл бұрын

Keep the great work man

@davidconley3610 4 жыл бұрын

Awesome!

@milanduic9565 4 жыл бұрын

Hi from Australia at the star was thinking hope he doesn't put a bead where the seat has to bolt in was happy to see beads either side of the cross brace good job