De-Moulding The First Balance 482
Рет қаралды 4,942
4 жыл бұрынCheck out the de-moulding of the first Balance 482 Catamaran at our new facility in Cape Town, South Africa.
@geoffthefarmer 4 жыл бұрын
The 482 is the perfect size. Well done.
@scottpaterson2767 4 жыл бұрын
Excited to see this awsome vessel being born
@robweiss748 4 жыл бұрын
Aw man, now you’ve got me thinking about the 482 again...
@kimblemooney2757 4 жыл бұрын
OK I am a fan - now I need the $$$
@LifeOnTheHulls 4 жыл бұрын
Is the plywood bulkhead in the stern simply temporary for lifting to speed up production rate.Cheers Ross
@andrewhodgdon2786 4 жыл бұрын
Yes, the plywood is put in place to add support as the hull is being lifted.
@geronimobegre750 4 жыл бұрын
Exiting! The plywood bulkheads are temporary right and will be removed later on?
@andrewhodgdon2786 4 жыл бұрын
Yes, the plywood is just to add support while the hull is being moved.
@poorasslawstudent 3 жыл бұрын
I wish Balance would move production to asia so they cut labor costs and make their boats available to more people.
@balancecatamarans 3 жыл бұрын
Asia would not be any cheaper than South Africa. The only way we could cut our costs would be to cut our quality. You can either use South Africa or Asia to build a low cost modest quality catamaran or a very high quality catamaran and the most competitive price. We elected to do the later. Phil
@poorasslawstudent 3 жыл бұрын
@@balancecatamarans I'm apt to believing you. After all, Seawind moved their production to Vietnam and their cats are not noticeably cheaper.
Tips Workshop
Рет қаралды 18 МЛН
Building a Balance 482 Catamaran IV: Deck de-mold, joining the hull & deck and internal construction
Balance Catamarans
Рет қаралды 14 М.
Balance Catamarans
Рет қаралды 4,4 М.
Mountain Passes South Africa
Рет қаралды 5 М.
MMAFightingonSBN
Рет қаралды 1,6 МЛН
hamid sahari
Рет қаралды 1,9 МЛН