DE0-Nano - Altera Cyclone IV FPGA Quick Start Tutorial

DE0-Nano - Altera Cyclone IV FPGA Quick Start Tutorial | Step-by-Step

Рет қаралды 3,347

Күн бұрын

In this comprehensive tutorial, join Ari Mahpour as he delves into the world of FPGA development using the DE0-Nano evaluation board from Terasic. The tutorial explores the steps to bring up the board, install the necessary environment using Altera Quartus Prime software, and create a BlinkyLED project with an Altera Cyclone 4 FPGA.
The DE0-Nano might be a bit on the older side, but its affordability and feature-rich design make it an excellent choice for evaluating and working on Cyclone 4 projects. Ari guides viewers through the setup process, highlighting key considerations, such as downloading support materials from Terasic's website and handling drivers.
As the tutorial progresses, Ari navigates Quartus Prime Lite Edition, addressing some nuances viewers might encounter, especially if they're using Windows 11. Insights are shared on potential challenges with Jtag drivers, as well as workarounds for Linux users.
The tutorial explores the project setup, discussing the pin mapping and configuration needed for a smooth synthesis and bitstream generation. Throughout the video, Ari provides helpful tips and shortcuts to streamline viewers' FPGA development workflows.
Viewers are invited to join Ari in this step-by-step guide to unleash the potential of their DE0-Nano boards, gain hands-on experience with Altera Cyclone 4, and program their very own BlinkyLED projects. Whether you're a seasoned FPGA enthusiast or a beginner, this tutorial has something for everyone.
0:00 Intro
0:55 Walking through the Support Material
2:32 The User Manual
3:13 Intel Quartus Prime Lite
4:47 USB Drivers (Windows & Linux)
6:57 Creating a New Project
14:25 Programming the Blinking LED
⚙️ Check Out the DE0-Nano - Altera Cyclone IV FPGA starter board Here: octopart.com/p0082-terasic+te...
⚙️ Check Out Ari's AMD Xilinx Arty A7, Artix 7 FPGA Evaluation Board Tutorial: • AMD Xilinx Arty A7, Ar...
⚙️ More from Ari: • Engineer Ari Mahpour
⚙️ More Component Deep Dives: • Component Deep Dives
⚙️ Browse Octopart for Parts & Tech News: octopart.com/
⚙️ TikTok: / octopart_official
⚙️ Instagram: / octopart
📚 Resources mentioned in the video:
- Terasic DE0-Nano User Manual: www.terasic.com.tw/attachment...
- Quartus Prime Lite Edition (Altera): www.intel.com/content/www/us/...
#FPGA #electronics #octopart

Пікірлер: 6

@user-hz7hp1dj1k 18 күн бұрын

That's Amazing explanation! Keep up these amazing efforts and I'll wait for more tutorials like this, THANKS brother!

@Octopart 16 күн бұрын

Thanks so much for checking out the vid! Ari's amazing. You can find a lot more of his tutorials by subscribing and checking him out at the playlist below. He's got a great solar series you may wanna have a look at: kzfaq.info/sun/PLtZurp7-0DcVXIR-fvnjVU0UyxgVSgSYu

@ultrafilipsz.5827 2 ай бұрын

Great tutorial, thank you so much!

@piotr_sikorski 4 ай бұрын

Today I've installed Quartus Prime 23.1 on Windown 11 and connected my USB Baster. Initially device was not recognized - no driver loaded. Then I've choose to install driver from location and pointed to installation folder of Quartus Prime. Driver installed correctly and USB Blaster became visible in Quartus.

@FATALK1LLCAMZ 3 ай бұрын

I was reading so many forums and you just saved me so much time, huge thank you! I am on Windows 11 and was having issues downloading USB Blaster due not being recognized on Windows 11. I updated the driver by pointing Quartus Prime/Driver folder and it installed USB blaster on Windows 11!