I'll take quality over quantity any day, and your videos, sir, are top quality indeed. Well worth the wait.

I like your “will it run” videos, as I enjoy the problem solving process you go through.

Your videos are always worth the wait, so don’t worry about that 👍🏻

This Men is talent in person 👌 No matter how long it takes you to upload a video , I'll patiently wait and watch it 🔧🔧🔧

very good as usual its satifying to see something that seems dead at first just come back to life like it wasn't abandoned for the last 20+ years

I always find your videos interesting. You really show from start to finish. I can't wait until your next video. Thank you very much for sharing.

Honestly any content is good content we all appreciate the will it run videos so we have stuff to watch

Always love the detail in your work. Thanks for the sun spot bonus. Not something seen everyday.

Thank you for the neet shot of the sun. It's fun to see you breath new life into an old engine. 😀

New mic system sounds good, always nice to relax to a nice restoration vid on a Friday! Looking forward to your big restoration reveal

This channel is one of the best repair and/or restore sites on KZfaq! I learn something new every time I watch your videos. Thanks for sharing the video. Well done again.

Thank you for talking about the upcoming projects. Lovely to know there’s more to come.

I really like the way the British say, "the belt is perished". An American like James Condon says, "the gas line has become petrified". Both adequate descriptions that the gas line needs changed. James also checks the air filter, and changes it immediately if as he rubs it with his finger & little balls roll off.

I really enjoy the videos you produce. The time taken to look at each part and explain the thought process before progressing is excellent. The new mic is working perfectly. Initially, I thought you were narrating the video during editing. It took a few minutes to realise that you were narrating whilst working. Look forward to the next one, keep up the good work 👍

That shot of the sun was awesome!

I like all your will it run or restoration videos. I've re watched one of your older videos when you rebuilt the Briggs and Stratton opposed twin engine. It really helped me rebuild mine the right way

the quality of your videos is outstanding, so the time it takes to make them is understandable. thanks for sharing.

The mic is perfect, video quality is perfect too. Love these quick will it run videos!

Audio quality is superb-as is the video content! Brilliant.

I love your restoration videos,so really excited to hear you have three projects coming!!💯👍 The new microphone sounds great!!!😁

Nice job, as always! Your mic sounds great. Thanks for the "teaser" for the upcoming restorations...looking forward to them. Thanks for sharing!

Yes man, I really enjoyed this video and commentary. Well done as always. Mic sounds really good. Look forward to the next project! Cheers

You and Mustie1 are my fav channels for this stuff.

Once again an excellent video👍. Great quality in your editing and audio was spot on.

Keep up the good work. I always enjoy your videos both the restoration and the will it run. Even the length is fine, never seems too long.👍

I love these videos 😊 you have inspired me to work on things like this in currently working on a husquavana weed wacker and i now have 7 lawnmowers thank you

Love a bit of machinery restorer. Not only entertaining but has helped me out with some fixes here & there.

A nice, informative, 'will it run', and your audio sounds excellent too. Thank you.

New mic feedback - you sound just as good as you always do man 😉 👉👉👉. I love it when there's a new upload from you. Thorough enjoy it every time. I could watch and listen to one every single day if possible. Your ability and knowledge levels are super impressive, and as for a KZfaqr who talks, for me, your voice is right up there with This Old Tony, RRC, Ca Lem, and Diecast Resurrection (RIP, gone but not forgotten 😢). Thanks for sharing dude 🙏🙏🙏. 😎

It's always a good day to see you've posted. Thanks!

Audio sounds clear and I can easily hear you working on the engine.

New 🎤 is brilliant sir. Very clear voice, far less background noise.

Even before I see the ending of this video I say you are going to have it in running condition 👍

Excellent video, great video footage, and well-explained thank you 👍

Those sun spot shots are amazing! Great video as always.

Always happy to see a new video upload, no worries about quantity :). Sound was good with your new set-up.

Great. Love watching these will it run vids.

your new mic is superb..your voice is excellent..i have always loved your voice..a perfect tone!

Excellent video as always, thanks very much.

Always a quality video. Thank you.

Great audio, great video, as always.

Awesome job as always

I always love the commentary videos! They are my faves.

Definitely looking forward to your next big restoration video 👍

Great video as always. Thanks.👍

Nice job checking areas out.

I always enjoy your videos, even if they take a long time to come out. Cheers from🇨🇦

love it mate keep up the good work

Mic sounds good. Thanks for the video btw.

Hi I love watching your videos as previously mentioned quality over quantity, quality always wins please keep them coming.

Great video, You are doing a very good job. I like your videos!

I'll watch your videos whenever you post them. I don't mind waiting!

Thank you for your video.

Just some advice from a mechanic You really shouldn’t be using a wobble extension on the ratchet unless you absolutely have to as it can put the bolts in at an angle damaging the thread

Nice episode; great video quality and the audio sounded very good. I always enjoy the voice-over/narration. Looking forward to the upcoming restoration vids.

Great job brother 👏

I really enjoy all your videos great mike too by the way round very clean and clear JeffinMaine

The microphone sounds crystal clear and steady volumn.

Love the UK Tractors and some of the features they have. I wish we had the same here in North America, when it comes to the consumer variety machines, like rear PTO.

Great work as always from the USA!!! Love the exhaust. Looks like you have hillbillies to.

A nice surprise seeing a video going up. Recovering from wisdom tooth removal and I was just about to run out of content to watch elsewhere. Mic System is A+ . We can hear you crisp and clear. And in dead zones between talking, the background activities are also crisp but not too loud to be overpowering. Perfection as always.

You sound great with the new mic 😁💯👍👍

23:37 you can also use a little bit of naphtha. Tho i wouldn't do this inside an enclosed space as that stuff is naaasty. The risk is well worth it, it dissolves any grime very fast and very well. Whenever i do maintenance on my bike, i take out the engine, and chuck basically everything else that's not rubber or fuel weak plastic in there and they come out clean as new. It does leave a white residue, but some water and a little bit of dish soap cleans it fast.

You should make a race lawn mower with that

Funny I enjoy these as I'm not that keen on mechanics or engines. Great job mate

Crazy to think that the UK has so many Briggs engines, but I also never seen a lawnmower with a stock exhaust going out the back

Your the king, of those single cylinder Briggs engines I love them total bullet proof engine can get them running like new Over and over

lookin' good, keep well...

When you look at the Sun like that it makes you realise just how tiny our little planet is. 👍

Love these videos…. Could you do a workshop tour

Great content and the mic sounds great 👍

On the starter gear ⚙️ if I remember correctly you can flip the gear on the other side and reinstall it and use the good side of teeth.

Excellent.

It’s so intriguing how such an old mower with that engine can be robust even to this day, certainly enjoyed the content and cannot wait for the next video, keep up the great work 😃

I'm the same. If i get something, if it can't be used as is, it ends up parts. Parts extreme, i break apart stuff down to sheet metal.

The new microphone sounds great!

I like when you talk on your videos.

I could literally build a whole vehicle in 3 months...used to build dune buggies out of old vw's during the winter and then sell them in the summer

I agree quality over quantity. Love your videos 🤩.

There are lots of spider webs on the clutch of that lawn mower and is good that you ree use parts of old lawn mowers which is good for the environment and saves money

I love these will it run videos. I don’t think anyone has this content for small engines. Keep them coming please Have a great day !

2:45 AIN'T GOT NO GAS IN IT

works great.

I look forward to your videos no matter how long they take . Will it run or the full restoration I enjoy learning more about these engines and the machines you work on. Thank you very much for sharing! Till the next one , cheers!

Mic sounds great. Be careful of placement. A few times we hear "heavy breathing."

Merci ! 👍👍👍👍

Nice 👍🏻👍🏻👍🏻

Audio sounds clean.

I had to replace 3 carbs before I realized the cheap plastic fuel valve was leaking when "off". Cool shot of the sun/sunspots! Mic is great. Whenever you post, we'll watch. Check out @Taryl Fixes All, I seem to recall he had a video on converting from points to electronic ignition. That will fix the plunger oil leak.

Another Westwood video can’t believe it so happy would like to see a restoration of a t1200

Dagwin ❤

What do you do with the restored mowers after you are done? Love your content!!

As you worked on the starter, I wondered if the gear could have been flipped over and the other end used. Is it interchangeable?

Love the content, just out of curiosity which channel did you start first, this or daggerwin?

Where do you get those foam gaskets for the top of the air cleaner?

New mic system seams to work great. But i would recomend putting your voice rec in Mono, it didnt happen often but torwards the end i had most of your voice in the Left Channel rather than both. Other than that crisp and clear. And take your time with the restoration vids. Ive worked on a few engines myself and i know waiting for parts ect takes time, So keep it up!

What brand and type of black paint do you use to paint all the metal parts in your videos?

If your not doing it already you should do a car video like a flip or a full restore

Hope to see one of your restoration videos soon….

Would there be any benefit to putting powdered graphite on the starter gear?