Thank you very much for this video man saved me a lot of money

Thank you for video..Im having same problem with my sons toyota camry .I hope this is the answer to the problem..your right it has been hart to find anything about this problem on youtube..But you tube has been a life saver on alot of other car problems .Thanks again ..

For anyone wondering tge ignition relay is the R5 relay. Not the small fuse but the black one. Check the diagram to see which one is R5

Thank you for the helpful information . I've been racking my brain and completely stresses wondering why my check engine light wont come .....

Awesome video! keep it up!

This video will save me a ton of money !! Plus maybe now car will pass D.E.Q. , and finally able to get new tags .

Would the position of the positive wire have anything to do with it I have something similar and I notice on your video your positive wire is on the left of the fuse block mine is on the right.. I replace mine with one from eBay

why can’t you just show the fuse , where’s it located ? I’m having the same problem

hello are you in california , the bay area., i have a 94 supra i need help on and it has the same problems, i pretty replaced almost everything. my car cranks and starts but bogs out and die when i tap on the gas pedal and the check engin light isnt turn on.

I am having a similar problem when I go to turn the key all I hear is a click I thought it was the starter so I replaced that and nothing so I replaced the neutral safety switch and clutch sensor and nothing I did have problems with nats before it completely stopped working everything powers on perfectly it’s just all it does is clicks I’m thinking about replacing the Ecu Bcm and ignition cylinder w key all together if I replace those would I have to do anything else or is it just a plug and play?

Hello sir i have a golf 4 it has los of power no engine light came on i also removed the maf sensor plug and started the car and no engine light turned on does that mean i have a dead ECU

I have also the same problem! a few weeks before, I replace all of the 6 ignition coils. When I push the start button, the car won't start won't crank. DVD, audio, anything all ok. but the car won't start and crank. I can't find ign SW in my car. my car model is a 2008 Lexus ES350. plz find ign sw plz.

I believe I’m having the same problem. First it was ignition coils, then it was an ecu fuse, and now it’s a MAF code p0102. The code is for the MAF circuit being too low on voltage. Tomorrow I’m going to get the extra grounds and install them but will that fix that maf issue or is something burnt out?

I have same proble thanks I go look for that fues

Bro I have hyundai accent 1996 1.5 check engine is on but is not starting and doors lights is off when I open the doors petrol light off

My car has the same problem, though it's a 1997 Corolla, no engine light on dash and won't even crank, please what's the number of the fuse and loc. ?

My Toyota Mark X check engine light comes on once after cranking and goes off again, please someone help me

Which fuse is it exactly?

It happened to me i removed wrong fuse and then my car didnt want to turn on so i was like damn that was not the fuse so i put the fuse back and it turned on but i have check engine light now instead of removing Taillight fuse i removed Ecu fuse 🤦🏾‍♂️ i wonder if autozone will erase the engine light so far my car drives good since the day that happened its been 3 days

What’s the BCM and what’s the difference between the ECM and that module

Bro what what fuse is it idk which one ur talking about how does it look

Bought my 03 z non running it cranks but doesn't start it also doesn't hold under its own power when key is in on position it sits at 9 volts maybe then 1 radiator fan turns on and it just can't handle all the power it's pulling, I also don't have a check engine light and can't even get my scanner to read the car, the only code I was able to get was p1000 and many people have said it's the ecu I checked the ecu cleaned some corrosion off the pins and opened it up but don't see anything that looks blown

I really hope this works

Found the blown fuse replaced it still crank no start

CAN YOU PLEASE TELL ME WHICH FUSE ?

My ‘Check Engine Light’ does not come on at all. My car is running perfectly fine. I do have a code popping up which is p0603. Any advice on what could be the issue?? I drive a 2010 Nissan Pathfinder.

I’d that same on Mitsubishi lancer 2002

I have disconnected ECU and connected it back. When I turn key ON position, ABS lights blink once (I don't see check engine lights that come on before cranking the car) and the radiator turns on immediately. When I try to crank the engine, it won't start. Do you have the same problem?

you need to show the fuse location you mentioned,if not this video was nothing but just blurred information

My car just turned off it cranks but won’t turn on & my obd can’t read the ecu & my engine light does not come on

Why justt talk istead show to people I dont u derstand.