Deburr everything! - Tech Talk | Ep 7
Рет қаралды 1,125
Жыл бұрынWelcome to the next video of our DATRON Tech Talk series!
Have you ever used a dove tail tool deburr the underside of your plate parts? This episode is all about the right tools and what to keep in mind when programming.
What do you think about today's topics and which topics should we talk about in future videos? Let us know in the comments!
And don't forget to SUBSCRIBE, so you don't miss any other video! There are coming more, so stay tuned!
***************
► LINKS
Download the CAM and SimPL file here:
dataspace.datron.de/public/do...
Milling Tools Catalogue:
datron.de/de_de/links/mediadownload/download-fraeswerkzeuge
Page:
www.datron.de
Shop: webshop.datron.de (only for DACH customers)
► SOCIALS
Facebook:
www.datron.de/facebook
LinkedIn:
www.datron.de/linkedin
Instagram:
www.datron.de/instagram
@christopherlaycock4196 Жыл бұрын
Cool 👍
@yoavsgeva Жыл бұрын
Habe dies sehr erfolgreich verwendet - danke. Ich habe aber eine Frage bitte: haben sie irgendwelche Plaene fuer einem Einschneider mit integrietrtem Schwalbenschwanz, so dass Wand und Fase zusammen in einem Arbeitsgang gefraest werden koennen? Zweischneider sind zwar OK, aber manchmal verklebt sich das Vakuumpapier an den Fraeser, was bei Einschneider nie passiert.
@Safiredesignengineer Жыл бұрын
Hi Marc, can i ask can this is programed on the datron neo directly or if another cad cam package is needed to program this?
@StealthWorkx Жыл бұрын
Hello Marc, I'm using a 0068493S on my new Datron Neo. I'm milling a 4mm hole 16mm deep into L168 aluminium. What would you say is the best speed, feed and technique would be for this job? I'm using Fusion 360, and currently using a 2D contouring sequence ramping down at 1 degree. 35000rpm, 595mm/min ramp speed. It seems to be ok but I've broken 2 cutters. I'd be very grateful if you can help.
@marcreis487 Жыл бұрын
Hey, the problem you run into is most likely the missing length of the chip channel. By going deeper than the flute length (=chip channel) the chip can´t get evacuated and the ethanol doesn´t really make its way to the cutting edge. Try 0068030W, it has a 15mm channel, that should be fine. Go faster (1500mm/min) and even a bit steeper (2 deg / 0,5mm pitch). Going too slow means that the tool doesn´t really cut the material, its more kind of grinding (which wears off the cutting edge)
@StealthWorkx Жыл бұрын
@@marcreis487 Hey Marc, fantastic thanks. I’ll give it a go. Fortunately I have one of those cutters so I’ll give it a go👍
TheSoul Music Jam
Рет қаралды 21 МЛН
Woodworking Projects
Рет қаралды 5 М.
Wylsacom
Рет қаралды 188 М.