We are installing Dec-King Roll Vinyl on an exterior deck.
Пікірлер: 46
@mattdavis90663 жыл бұрын
Dude you rock .. I gotta give you some compliments on the way you handle your biz .. Well done.
@sandyb23913 жыл бұрын
thanks for all the lil tips. i did my deck 8 years ago and didn't put vinyl down and is exposed to all weather. i did put a protective coat of paint and all but should have put vinyl for sure. so now going to take the patio floor apart and redo
@cloudedjourney5 жыл бұрын
Now i wish I inset my fashing. That's a good idea.
@mrfantum15 жыл бұрын
It does help on a low slope deck
@fraddi4 жыл бұрын
@@mrfantum1 whats fashing??
@mrfantum14 жыл бұрын
@@fraddi flashing.......
@mrfantum14 жыл бұрын
@@fraddi flashing.......
@fraddi4 жыл бұрын
@@mrfantum1 what does that mean? I'm new to this. Thanks!
@mitchgrady80372 жыл бұрын
Wondering why you planed down the edges? I am assuming it is to create a recessed edge? Also, do you use a cant strip along the house or do you just put the vinyl behind the siding?
@mikecraftsmancustombuilder36502 жыл бұрын
I can't speak for all manufacturers but I believe cant strips aren't recommended these days -- shrinkage is a concern. You get the vinyl "finger tight" in the corner between the horizontal and vertical planes. And yeah the planing is just so you don't see the bump created by the thickness of the flashing.
@jameshaydel82622 жыл бұрын
S/b a step down at the door so a driving rain doesn't get pushed into the house. Fatal error. Maybe a roof is going up, I don't know.
@roper43862 жыл бұрын
Hi can you link the vinyl you used?
@davejohnson288825 күн бұрын
what did you use on the seams
@susan770able3 жыл бұрын
Thank you for the video
@johnal45602 жыл бұрын
Would i be able to use BONDO for filling the gaps before gluing vinyl on my balcony or anything else since i live in Canada and cannot find this Ardex Feather here Also would i be able to install new vinyl on a plywood that previously had vinyl glued to and i removed the vinyl and sanding the plywood would that be ok thx
@darrenrobillard94962 жыл бұрын
Yes you can, might tear up some of the plywood slightly, but you can fill those areas no problem. In Canada we use thin set.
@susan770able2 жыл бұрын
Is that a router or a planer that you using to recess the ply ?
@mrfantum12 жыл бұрын
Planer
@mikeledee87863 жыл бұрын
What is the product you used to seal the seams? Thanks
@mrfantum13 жыл бұрын
The seams are sealed by heating the two surfaces an melting then together. Check video 'deck 3 seams'
@mikeledee87863 жыл бұрын
What I'm asking is what is that powder you were mixing with water
@mrfantum13 жыл бұрын
@@mikeledee8786 I'm sorry my mistake, I use a Ardex feather finish it is a leveling compound . You can use several other products as well but you would need to make sure that it is something that can be used in an exterior application. Ardex mrf is a good option.
@jessicar03173 жыл бұрын
What is the name of the border you using around the deck ? And what’s the name of Concrete you are using ?? I
@mrfantum13 жыл бұрын
@@jessicar0317 Ardex feather finish. MRF.
@brucepollen2767 Жыл бұрын
what product is this, it installs like deck King ?
@mrfantum1 Жыл бұрын
That's what it is
@xx015xx2 жыл бұрын
can I use osb plywood for the base?
@mrfantum12 жыл бұрын
Not typically recommended. Plywood would be better. OSB can flake.
@xx015xx2 жыл бұрын
@@mrfantum1 thanks for the reply awesome works btw
@tjgallo2 жыл бұрын
@@mrfantum1 totally agreed! Quick question, do you have any input on using marine grade ply and/or applying a sealant, or do you have any experience with breathing/expansion, etc. issues (it's on an exterior deck subfloor using a poly finish)?
@jeffico23613 жыл бұрын
Can you use cement board instead?
@mrfantum13 жыл бұрын
No. It would would not have structural integrity to span the joists.
@FloorsbySouthernboys6 жыл бұрын
Do you like get a whole bunch of footage and then sit and get it all upload it when I go to bed at like five videos for five videos today LOL, I would love to mention you in one of my videos and throw some subscribers your way could you do some excellent work and I would love to do what I can to send some people to your channel if that’s OK by you
@mrfantum16 жыл бұрын
iv been sitting on a whole pile of footage half edited. today was just the day to finish a few. I enough for a bunch more but they won't happen right away. . For Sure send them over. That would be great. I have been doing more time-lapse type stuff than the tutorial and tip style.
This guy definitely does not know how to do it sufficiently. Take it from a 20+ year certified installer.
@Rayram5553 жыл бұрын
Please get a qualified sheet metal company . Do not trust this method.
@mattdavis90663 жыл бұрын
Yeah he does . i invented outdoor viynl so I know more than you plus I have 21 years exp as a professionally ninja um viynl master . so beat it kid
@tjgallo2 жыл бұрын
@snakebite venom, can you explain specifically what he's doing incorrectly? That would surely help support your comment and I'm very curious. THanks.
@robertoswald13053 жыл бұрын
Way too much work. There are easier systems.
@connorcobitz99773 жыл бұрын
He made it too much work I do this everyday
@mattdavis90663 жыл бұрын
No . you don't do this every day . no one does this every day if you did it every day you would be sleeping right now not watching this awesome video .