Decoupage Hack / Iron-On Technique / NO WRINKLES OR BUBBLES

Рет қаралды 17,807

Күн бұрын

Decoupage using the Iron-On Technique / NO WRINKLES OR BUBBLES
▶️ Visit my store: www.etsy.com/ca/shop/OurUpcyc...
▶️ Shop my Amazon store for all my favourite craft supplies: www.amazon.com/shop/upcycledt...
Hey everyone!
Welcome and in this video I will show you how to decoupage using the iron on method. This is a easy decoupaging technique using a iron and you wont have any bubbles or wrinkles. All you need is some Mod Podge and a iron to create fabulous home decor with this iron on decoupage method
How to distress picture frames: click link to sign up: bit.ly/3GA49V3
Mod Podge: amzn.to/3oiwmsm
Homemade chalk paint: • Easy DIY Chalk Paint i...
Poly acrylic sealer: amzn.to/3lENeIN
If you love my videos please SUBSCRIBE and don't forget to press the bell, 🔔 like, comment and share. Stay safe and Love all. 😍😘 Deidre
▶️ Please Subscribe: / ourupcycledlife
------------------
▶️ Visit my ETSY store: www.etsy.com/ca/shop/OurUpcyc...
▶️ Support my channel: www.buymeacoffee.com/Deidre
▶️ Subscribe to my email list for more crafting and DIY content! eepurl.com/hLQBjf
------------------
▶️ Follow Me on:
• Instagram: / our_upcycled_life
• Facebook: / deidrewoodgourlay
• Pinterest: www.pinterest.ca/deidregourlay/
• TikTok: / our_upcycled_. .
------------------
▶️ My other videos:
• BURINING DECOUPAGE : • Transform ANY Soap int...
• HOW TO DECOUPAGE SOAP: • Transform ANY Soap int...
• 5 DECOUPAGE METHODS : • Master Decoupage in Mi...
• 4 FARMHOUSE THRIFT STORE MAKEOVERS: • 4 Thrift Store Makeove...
#trashtotreasure #decoupagetutorial #OurUpcycledLife #ironondecoupage #upcycledcrafts #diycrafts #diy

Пікірлер: 116

@OurUpcycledLife 2 жыл бұрын

Subscribe to my email list for more crafting and DIY content! eepurl.com/hLQBjf

@annodnostaw9971 2 жыл бұрын

I used an inkjet color printer to make copies of old vintage XMAS cards so I could decoupage them onto wood. I ironed print w/no steam iron at highest setting using a thin brown paper bag between iron and inkjet print, then I lightly sprayed prints with aqua net hairspray. I let them dry for about an hour and then ironed again using a thin brown paper bag between iron and inkjet print. The ink did not bleed when I applied Mod Podge on it and my XMAS project came out beautifully.

@OurUpcycledLife 2 жыл бұрын

Yahhh!! So fun. Glad it worked so well for you

@MissMolly3377 2 жыл бұрын

Oh great. The heat from the iron mist set the ink, the same as the oven. Thanks for this tip. I will try it both ways.

@leemager128 2 жыл бұрын

I have to get my chores done! I'm enjoying these videos so much and nothing is getting done...lol! 😊

@OurUpcycledLife 2 жыл бұрын

Uh oh... sorry!! lol.... glad you are finding lots of good content

@pamfaircloth5284 2 жыл бұрын

So helpful, Diedre! Thank you so much!

@OurUpcycledLife 2 жыл бұрын

Thanks for watching ❤️

@purplejanew 2 жыл бұрын

Those frames are fabulous!!

@OurUpcycledLife 2 жыл бұрын

I love the way they turned out! Thanks for watching

@johnibrazzell764 2 жыл бұрын

Tyvm for sharing this information!

@OurUpcycledLife 2 жыл бұрын

You are so welcome! Thanks for watching Johni

@joannalexa2531 2 жыл бұрын

Love these, thanks!

@OurUpcycledLife 2 жыл бұрын

Thanks for watching Joanna!

@angelbearcreations_ks 2 жыл бұрын

Awesome tutorial! TFS!

@OurUpcycledLife 2 жыл бұрын

You are so welcome! Thanks for watching Penny

@jennifertaylor7784 2 жыл бұрын

Love this ❤️❤️❤️

@OurUpcycledLife 2 жыл бұрын

Thanks for watching ❤️

@marianaviljoen3530 2 жыл бұрын

Thank you for another great tutorial! You always get me excited to try it my self!

@OurUpcycledLife 2 жыл бұрын

You are so welcome! Thanks for watching Mariana

@jennynordin2730 2 жыл бұрын

Thanks for another great video, every time I watch you I learn something new. That is an awesome decoupage technique.

@OurUpcycledLife 2 жыл бұрын

Glad to help out! Thanks for watching Jenny

@MsZzzipper Жыл бұрын

Thank you!

@OurUpcycledLife Жыл бұрын

You're welcome!

@mandyhall1674 2 жыл бұрын

They look great thank you :)

@OurUpcycledLife 2 жыл бұрын

Thanks for watching Mandy

@debbiemason5267 2 жыл бұрын

Thank you for this video! Definitely am going to try this method!

@OurUpcycledLife 2 жыл бұрын

You are so welcome! Thanks for watching Debbie

@zullo3529 2 жыл бұрын

Those look great Deidre! I like the iron on method

@OurUpcycledLife 2 жыл бұрын

So easy! Thanks for watching Stephanie

@designsbydawn976 2 жыл бұрын

Awesome tutorial! Tfs and God Bless ❤💚🌲☃️🥰

@OurUpcycledLife 2 жыл бұрын

Thanks for watching Dawn!

@anagoncalves9723 2 жыл бұрын

WOW you're amazing with your techniques thank you ,"GOD BLESS"..

@OurUpcycledLife 2 жыл бұрын

Thanks for watching Ana

@charlotted6247 2 жыл бұрын

That seems like a great way to do photos. Will try ornaments like that !!!

@OurUpcycledLife 2 жыл бұрын

Thanks for watching Charlotte! Yes ornaments would be perfect!

@yourunclesam6780 2 жыл бұрын

Wonderful technique to make money.Thanks

@OurUpcycledLife 2 жыл бұрын

Thanks for watching!

@sweetums6607 2 жыл бұрын

Have you tried using a spray polycrylic to seal images you ironed on wood? Thanks

@OurUpcycledLife 2 жыл бұрын

Yep I sure have. Works great!

@ZombieQueen819 2 жыл бұрын

I love your videos

@OurUpcycledLife 2 жыл бұрын

Thanks for watching!

@sharonjansky3877 2 жыл бұрын

Thanks for sharing this tutorial. This is something I definitely want to try. Your pics look awesome in those frames. I’ve tried the tape method after you showed it on your channel. It’s become one of my favorite ways to distress.

@OurUpcycledLife 2 жыл бұрын

Thats awesome! Works so well!

@serenaleaghgrace5023 2 жыл бұрын

i like this ,cheers, from Ess from oz

@OurUpcycledLife 2 жыл бұрын

Thanks for watching!!

@cathyknapp9360 2 жыл бұрын

This is amazing thank you so much I have three pieces of wood and have been wanting to do something for my husband and my daughter for Christmas with a picture going to be using this method for sharing all your great wisdom and knowledge have a great day my dear friend

@OurUpcycledLife 2 жыл бұрын

What a great idea Cathy! Thanks for watching

@christinestewart8951 5 ай бұрын

I think am going to try that one

@OurUpcycledLife 5 ай бұрын

Glad you enjoyed

@victoriashields6900 2 жыл бұрын

Wow that seems so easy thank you for sharing NO NEED TO CRY 😍yes I'm totally goin to try this method and I'm a new subscriber love ❤ yall!!!

@OurUpcycledLife 2 жыл бұрын

Welcome!! Glad to have you here!! Love new crafting friends

@cindymacdonald5611 2 жыл бұрын

Always enjoy your great videos!! Looks like you have done some great adventures!! Take care. Cindy from Vancouver!!

@OurUpcycledLife 2 жыл бұрын

Always finding adventure here! We love the outdoors. My daughter is in Port Moddy heading there in a few weeks !! Cant wait to be on the West Coast. Thanks for watching Cindy

@cindymacdonald5611 2 жыл бұрын

@@OurUpcycledLife Have a great visit with your daughter!!

@kimdurant3776 2 жыл бұрын

Thank you so much for sharing I really love the look of these frames! Congratulations on the number of subbies .... you are rockin this you tube channel

@kimdurant3776 2 жыл бұрын

i would like the newsletter please

@OurUpcycledLife 2 жыл бұрын

You bet here is the link! bit.ly/3GA49V3

@chelseakerr3669 2 жыл бұрын

HELLO, good video! 🔥🔥🔥

@OurUpcycledLife 2 жыл бұрын

Thanks for watching Chelsea!

@valerierichardson873 11 ай бұрын

Just wanted to thank you for your video! I had a decoupage malfunction, I had decoupaged a small table and left it in my garage after applying the poly, not sure if it was the 100 degree days or the 100% humidity, but the paper lifted and had huge air bubbles under it. I used this method to lay the paper back down and it worked perfectly! Saved my table and all my hard work! Thank you!

@OurUpcycledLife 11 ай бұрын

Glad it helped!

@kellensimonedossantos8442 2 жыл бұрын

Preciso pedir pra alguém traduzir esse vídeo nossa essa mulher ensina o que ninguém tem coragem de ensinar com coisas possíveis de ter ao nosso alcance inclusive spray de cabelo pelo que entendi incrível amei muito muito obrigada 🇧🇷

@OurUpcycledLife 2 жыл бұрын

Thanks for watching!

@helenai13 Жыл бұрын

Carregar no símbolo da roda dentada no canto superior direito do vídeo e activar a legendagem. Aparecendo auto-tradução é depois escolher a língua pretendida (neste caso, português).

@queenb9070 2 жыл бұрын

🤩

@OurUpcycledLife 2 жыл бұрын

Thanks for watching

@cindygrim3060 2 жыл бұрын

I love it, you explained it so well. Can I use my Cricut easy press instead of an iron?

@OurUpcycledLife 2 жыл бұрын

You bet you can Cindy! Thanks for watching

@amandajones6481 Жыл бұрын

I've been upcycling an old wooden tray. I took off the old paint with paint stripper and then repainted it with a few coats of light sage green Decor Chalk Paint, and then painted over the green with a few coats of White Chalk Paint. Then I sanded back some of the white paint - on the corners and so on - so you can see some of the green, and now I'm ready to decoupage over the inside base of the tray, but I'm nervous because I don't want to wreck it 😅! I love your technique with the ink jet prints and the iron, but I was wondering how you stop the baking paper from sticking to the Mod Podge, or does it just not stick to anything? Thank you for your great video tutorial. I've got lots of pictures that I've printed off my ink jet printer that I can use with this technique. I don't know how we crafty people got on before KZfaq was invented, because I would never have heard of your technique if it wasn't for KZfaq videos! Love from Amanda Jones ❤️

@OurUpcycledLife Жыл бұрын

So many techniques! The mod pdoge will not stick to wax paper

@thanaahassan7928 8 ай бұрын

👍👍👏👏👏👏

@MissMolly3377 2 жыл бұрын

So, can you set the ink this way, anytime you transfer, or just when you're using it on wood? Thank you. I so appreciate your channel.

@OurUpcycledLife 2 жыл бұрын

Yes you can set it that way on any project!

@Oonagh72 2 жыл бұрын

I have a question. Can you seal the picture front first.first. Then Iron it on, then seal a last time? Will the technique work that way? The reason it is wrinkling is because it is soaking up the moisture.

@OurUpcycledLife 2 жыл бұрын

That's a interesting point! I am going to try it and will update you but it makes sense... Thanks for watching

@karenhaskins590 2 жыл бұрын

You mentioned canvas above in your description box, but I still have a question... can this method be done on a canvas? (I actually use Liquitex rather than Mod Podge.) I love the texture a canvas provides! Thank you so much for all your awesome tutorials! I always learn something! xo

@OurUpcycledLife 2 жыл бұрын

Yes, absolutely here is a link of that tutorial I did on canvas kzfaq.info/get/bejne/g7d0dr2bnqi7gYU.html

@karenhaskins590 2 жыл бұрын

@@OurUpcycledLife Thank you!

@janetanderson1763 2 жыл бұрын

I love your tutorials....tku... Question from a newbie: you printed the pics on copy paper instead of photo paper...is there a reason?

@OurUpcycledLife 2 жыл бұрын

Photo paper is very thick and hard to do a nice decoupage. Plus I don't like to use a original photo incase it doesn't work and your photo is ruined. You can also use a photo copied photo. Thanks for watching!

@cindycollins7345 2 жыл бұрын

Do you think it would cure over a wood stove.? Or does it need to be a enclosure

@OurUpcycledLife 2 жыл бұрын

Thanks for watching Cindy! I always let mine air dry

@kristinacleveland1805 2 жыл бұрын

lol, I can't believe how long that container of Mod Podge has lasted! Love the photos and the technique.

@OurUpcycledLife 2 жыл бұрын

It goes on forever!!! I don’t put it on thick though … you don’t need much

@MissMolly3377 2 жыл бұрын

I have noticed, people use way too much glue in their projects. Whether it is mod podge, wood glue, hot glue, etc., they use way too much. If you put too much glue on, you won't get a good seal. With mod Podge, using too much of it, causes lots of wrinkles. If you use a lot of hot glue, it doesn't seal good, at all. I also have noticed that people will put on wood glue or super glue, then add hot glue on top of it, 🤦, it will cancel out the wood glue or super glue. The super/wood glue, then, will stick to the hot glue, instead of the wood, metal, glass, or whatever surface, someone is using.

@lauraakagigi Жыл бұрын

Hello!! Can this technique be used for a glossy calendar page??

@OurUpcycledLife Жыл бұрын

I would do this process firstHow to Decoupage with Thick Paper / NO BUBBLES or WRINKLES kzfaq.info/get/bejne/b9t8q8qe1NLZiXk.html into

@angelicehenderson7237 2 жыл бұрын

Can you do this face down and then apply the rub method?

@OurUpcycledLife 2 жыл бұрын

The rub technique is completely different process. Here is a tutorial that will help you out! kzfaq.info/get/bejne/atuJmJSEvbiodWg.html

@terismidt4920 4 ай бұрын

Thank you for this video. Very informative. I have a question for you. I want to put a canvas print on the foam board. Can I mod podge on the foam board, let it dry, and put my canvas print on it. So my question is, will this process work without melting the foam board, and will the print on the canvas be okay? Thank you so much for your time.

@OurUpcycledLife 4 ай бұрын

It might melt it

@josiedimora9613 Жыл бұрын

When you iron again after the verathane has dried, does the verathane melt off

@OurUpcycledLife Жыл бұрын

@josiedimora9613 Жыл бұрын

What kind of paint did you use to paint onto the backing?

@OurUpcycledLife Жыл бұрын

Chalk paint

@vintageuprisingtx Күн бұрын

does this work with Tin? nd what if i want to do it on a round surface?

@OurUpcycledLife 16 сағат бұрын

How to Decoupage With Thick Paper and have NO Wrinkles or Bubbles kzfaq.info/get/bejne/qb9kprZk1eCdf2Q.html

@CoCo-zx4cd Жыл бұрын

Hi I love this! I have tried to get on your email list bit a page pops up that says "THAT'S ODD, this page appears to be missing"? I wanted to know if you painted the boards with your chaulk paint? I was thinking do you think I could use heat resistant tape to hold the pic in place?? It works with my heat press. I figured I'd tell you my idea! 🤷‍♀️PLEASE LET ME KNOW ABOUT GETTING ON YOUR EMAIL LIST. 🤩

@OurUpcycledLife Жыл бұрын

Here is link to email view.flodesk.com/pages/632e2d2fd960dab4eb97c358

@jenniferstokes65 6 ай бұрын

What is that stuff you used to seal the picture?

@OurUpcycledLife 5 ай бұрын

Water-based, polyacrylic sealer

@craftlover9702 Жыл бұрын

Can this technique be used putting a napkin on wood?

@OurUpcycledLife Жыл бұрын

Sure can

@christiewade7184 2 жыл бұрын

You must have your PhD degree in all things Mod Podge. Thanks

@OurUpcycledLife 2 жыл бұрын

Hahaha ! almost.... definitely perfected a lot of techniques

@maryfarnsworth9874 Жыл бұрын

How high do you set your iron

@OurUpcycledLife Жыл бұрын

It’s on the highest setting thanks so much for

@maryfarnsworth9874 Жыл бұрын

Thank you

@maryfarnsworth9874 Жыл бұрын

I didn’t realize my napkin didn’t adhere to my board, I had put modpodge on it already, can I retiring it ??

@maryfarnsworth9874 Жыл бұрын

Oops reiron

@cadoo5591 2 жыл бұрын

So that would be 392 degrees fahrenheit?? I thought 200 degrees sounded hot and then you said celsius!

@OurUpcycledLife 2 жыл бұрын

Yes I am in Canada so we do Celsius :) Thanks for watching

@jeninugent3822 7 ай бұрын

I have been doing the iron on method but I always get wrinkles after I iron. I iron again but it keeps happening

@OurUpcycledLife 7 ай бұрын

Might be using too much mod pdoge . You don’t need much